Search ►
Clutch Center Nut Removal Tool
Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.
Clutch Center Nut Removal Tool ~ Premium
Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.
Tappet Adjuster Screw & Nut Set
Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires
Bolt Set
High Quality Premium Zinc Bolt Set Set includes: 63 Bolts/Screws Replace those rusted and rounded off Phillips head case screws with this comprehensive set of correct replacement bolts for these covers - alternator, clutch, points, sprocket and carb holder bolts. The set comprises 63 correct length bolts including 6mm x 18mm & 6mm x 22mm not found in our competitors sets. The 70mm and 125mm hex head bolts are smooth head and manufactured to the correct length rather than cut down.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 57 Bolts, 11 Washers and 2 Allen keys for a total of 70 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, the left and right engine covers - points, clutch, alternator, sprocket and starter motor covers. The washers go under 8 of the cylinder head cover screws with washers from the factory, and one of the alternator cover screws, and the two starter motor cover screws.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 58 Bolts, 13 Washers and 2 Allen keys for a total of 73 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, the left and right engine covers - points, clutch, alternator, sprocket and starter motor covers. The washers go under 8 of the cylinder head cover screws with washers from the factory, and one of the alternator cover screws, and the two starter motor cover screws.
Valve Adjustment Tool
Valve Adjustment Tool. Use this tool to easily adjust valves.
Cylinder Head Nut Cover
Cylinder Head Nut Cover OEM Ref # 91318-300-013
DOHC Screw Set
71PC DOHC Screw Set, Includes Front Stay Plate Screws (8), CV Cap Screws (8), Throttle Cable Bracket Screw (1), Rear Stay Plate Screws (8), Vacuum Petcock Screws (6), Bowl Screws (12), Accelerator Pump Cover Screws (3), Air Cutoff Screws (8), Choke Cable Clamp Screw (1), Throttle Plate Screws (8) and Choke Plate Screws (8).
Points Cover Screws
Points Cover Screws (Set of 2). Fits: ALL 1969-1978 Honda CB750 Points Covers and Our Points Cover (Part #13-0000).
Engine Cover Hardware Set
Engine Cover 34 Piece Hardware Set, Includes the Bolts/Screws for the Engine Case Side Covers, Alternator Cover, Points Cover and Tach Cover.
Tach Drive Plug Block Off w O-Ring
Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.
High Performance Kibblewhite Cylinder Stud Nuts
High Performance Kibblewhite Black Oxide Finish Cylinder Stud Nuts Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder stud nuts are manufactured from high strength premium steel. After machining these nuts are heat treated to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance.
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 15420-300-020
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 15420-413-000 / 15420-415-000 / 15420-MA6-000
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 15420-333-000 / 92003-094 / 92003-193 / 92001-1074
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 1J7-13340-00 / 2H7-13340-00 / 90401-20041
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 1L9-13340-01
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 16126-1001 / 16126-1108
Engine Bolt Set
Engine Bolt Set, 60 Pieces, Includes 13 Different Bolt Types and 2 Allen Keys.
Engine Bolt Set
Engine Bolt Set, 54 Pieces and 3 Allen Keys Included.
Engine Bolt Set
Engine Bolt Set, 54 Pieces and 3 Allen Keys Included.
Clutch Cover Screw Set
Clutch Cover Screw Set. Includes all 3 Screws needed to fasten the Clutch Cover. Replaces OEM # 93700-06016-0B X3.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 38 bolts and 2 Allen keys for a total of 40 pieces. These bolts are smooth head Allen bolts and are for the visible covers only.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 34 bolts and 3 Allen keys for a total of 37 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, cam end covers and left and right crankcase covers.