Search ►
Handlebar - Stock Type ~ CB750 1972
Stock Type Handlebar for the CB750K (1972) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 28 1/2" - 648mm, Pull Back - 4" - 101mm, Inner Rise - 3 1/8" - 79mm, End Rise - 3" - 76mm, Center Width - 5 1/2" - 140mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-341-000 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB400F 1975-76
Stock Type Handlebar for the CB400F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm Length - 27 1/4" - 692mm Pull Back - 3 1/2" - 89mm Inner Rise - 2 1/4" - 57mm End Rise - 3 1/4" - 82mm Center Width - 5 1/4" - 133mm Base Width - 7" - 178mm Knurl Width - 4 1/2" - 114mm Control Length - 8 1/2" - 216mm Drilled - YES Replaces OEM # 53100-377-000 Note: These Are Drilled For Wires
Honda GL1000 Goldwing 1978-79 Replica Handlebar
Honda GL1000 Goldwing 1978-79 Replica Handlebar. Replaces OEM # 53100-431-780 / 53100-431-670 Thickness - 7/8" - 22mm, Length - 32 1/4" - 820mm, Pull Back - 7 3/4" - 196mm, Inner Rise - 9" - 228mm, End Rise - 10" - 254mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled NO There are Holes For Switch Positioning.
Handlebar - Stock Type ~ CB750K 1977-78
Stock Type Handlebar for the CB750K (1977-78) - Chrome. Bars are not drilled for wires. Bar Diameter - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 7" - 178mm, End Rise - 9" - 228mm, Center Width - 6" - 152mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8 1/2" - 216mm, Drilled - YES Replaces OEM # 53100-405-010
Honda GL1100 Goldwing 1980-83 Replica Handlebar
Honda GL1100 Goldwing 1980-83 Replica Handlebar. Replaces OEM # 53100-MB9-800 / 53100-MB9-670 / 53100-463-670 Thickness - 7/8" - 22mm Length - 32 1/8" - 820mm Pull Back - 10" - 254mm Inner Rise - 8 3/4" - 222mm End Rise - 10" - 254mm Center Width - 6 1/2" - 165mm Base Width - 9 1/2" - 241mm Knurl Width - 4 1/2" - 114mm Control Length - 10 1/2" - 266mm Drilled NO There are Holes For Switch Positioning
Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 6 1/2" - 165mm, End Rise - 8" - 203mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB550F 1975-76
Stock Type Handlebar for the CB550F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm, Length - 28 1/4" - 718mm, Pull Back - 3 3/4" - 95mm, Inner Rise - 3 3/8" - 86mm, End Rise - 4 1/2" - 114mm, Center Width - 5 1/4" - 133mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-390-620 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB750 1969-71
Stock Type Handlebar for the CB750K (1969-71) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 3/8" - 136mm, Inner Rise - 5 1/4" - 133mm, End Rise - 6 7/8" - 175mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-300-000 Note: These Are Drilled For Wires
Honda GL1000 Goldwing 1977 Replica Handlebar
Honda GL1000 Goldwing 1977 and GL1000L 1976 Replica Handlebar. Replaces OEM # 53100-371-980 / 53100-371-660 Thickness - 7/8" - 22mm, Length - 32 3/8" - 822mm, Pull Back - 8" - 203mm, Inner Rise - 8 3/4" - 222mm, End Rise - 9 3/4" - 248mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 10 1/4" - 260mm, Drilled YES There are Holes For Internal Wiring and Switch Positioning
HandleBar
HandleBar Black Café/Clubman Style Width - 27 3/4" - Rise - 4" - Pullback - 1 1/2" x 7/8"Dia.
Honda Handlebar Pad
Honda Handlebar Pad Protect your chest and spruce up the look of your bike with a brand new handlebar pad. These will fit to 1/8" and 7/8" bars.
Riser Conversion Shim Set/4
Riser Conversion Shim Set/4 (Good for one set of handlebars). Allow 7/8" handlebars to be used in risers or bar mounts designed for 1" handlebars.
Handlebar - Black
Street Tracker - Black Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm, Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO Not Drilled for Wires
HandleBar
HandleBar Virago Type Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm. Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Dirt / Street Track Type - Chrome Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm, Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO
HandleBar
HandleBar Superbike Type Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 4" - 100mm, Inner Rise - 3 1/8" - 79mm, End Rise - 4 1/4" - 108mm, Center Width - 5" - 127mm, Base Width - 7" - 177mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Superbike Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 4" - 100mm, Inner Rise - 3 1/8" - 79mm, End Rise - 4 1/4" - 108mm, Center Width - 5" - 127mm, Base Width - 7" - 177mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Daytona Tour Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 29 1/4 - 743mm, Pull Back - 4" - 100mm, Inner Rise - 4" - 100mm, End Rise - 6 1/4" - 158mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Daytona Tour Type Chrome Bar Diameter - 7/8" - 22mm, Length - 29 1/4 - 743mm, Pull Back - 4" - 100mm, Inner Rise - 4" - 100mm, End Rise - 6 1/4" - 158mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Z Handlebar - Chrome Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
Handlebar
Z Handlebar - Satin Black Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Yamaha Special Bar Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 12" - 305mm, Inner Rise - 7 3/4" - 197mm, End Ride - 6" - 152mm, Center Width - 7 1/2" - 190mm, Base Width - 11" - 280mm, Knurl Width - 4 1/2" - 115mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar - CB 750 Special Bar Bar Thickness - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 6 1/2" - 165mm, Inner Rise - 6 1/4" - 158mm, End Rise - 5" - 127mm, Center Width - 7" - 178mm, Base Width - 10" - 254mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Clubman/Cafe Bar - Black Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
Handlebar
Clubman/Cafe Bar - Chrome Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
Handlebar - Black
Drag Bar - Gloss Black Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Drag Bar - Chrome Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Chopper T Handlebar - Chrome
Chopper T Handlebar - Chrome Bar Diameter - 7/8" - 22mm, Length - 27 3/4" - 705mm, Pull Back - 4 1/2" - 114mm, Inner Rise - 7" - 178mm, End Rise - 7" - 178mm, Center Width - 5" - 127mm, Base Width - 7" - 178mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Chopper T Handlebar - Black
Chopper T Handlebar - Black Bar Diameter - 7/8" - 22mm, Length - 27 3/4" - 705mm, Pull Back - 4 1/2" - 114mm, Inner Rise - 7" - 178mm, End Rise - 7" - 178mm, Center Width - 5" - 127mm, Base Width - 7" - 178mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar
Ape Hanger Handlebar - Chrome Bar Thickness - 22mm - 7/8", Length - 838mm - 33", Pull Back - 203mm - 8", Inner Rise - 305mm - 12", End Rise - 248mm - 9 3/4", Center Width - 127mm - 5", Base Width - 228mm - 9", Control Length - 216mm - 8 1/2", Drilled - NO
Handlebar - Black
Ape Hanger Handlebar - Gloss Black Bar Thickness - 22mm - 7/8", Length - 838mm - 33", Pull Back - 203mm - 8", Inner Rise - 305mm - 12", End Rise - 248mm - 9 3/4", Center Width - 127mm - 5", Base Width - 228mm - 9", Control Length - 216mm - 8 1/2", Drilled - NO
HandleBar
HandleBar European Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Suzuki GS Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30" - 762mm, Pull Back - 6" - 152mm, Inner Rise - 6 3/4" - 171mm, End Rise - 9" - 228mm, Center Width - 5 1/2" - 140mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
European Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar
Dirtbike Custom Type Bar - Chrome. Bar Diameter - 7/8" - 22mm, Length - 31 3/4" - 806mm, Pull Back - 4" - 102mm, Inner Rise - 4 1/4" - 108mm, End Rise - 6 3/4" - 171mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires