Search ►
Engine Oil Seal Kit
Engine Oil Seal Kit - 4 Pc. Kit Kit Includes: Transmission Front Sprocket Seal 20x34x7 Replaces OEM# 91201-030-0333, Points Advancer Seal 15x25x7 Replaces OEM# 91203-965-003, Right Crankcase Cover Seal 16x28x7 Replaces OEM# 91204-259-003, Gearshift Seal 14x28x7 Replaces OEM# 91206-286-013.
High Performance Kibblewhite Valve Stem Seal Set
High Performance Kibblewhite 100% Viton Valve Stem Seal Set of 8. Replaces OEM# 12209-333-005. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite Red 100% Viton valve stem seals are designed to have optimum fitment, allow, maximum lift, and to give maximum life. Kibblewhite Red valve stem seals are resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These viton seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combustion chamber causing detonation, carbon build up and a loss of power. The Red Ones are truly the racers choice.
Cylinder Stud Packing Set (8pc)
8pc. set of rubber cylinder head bolt (stud) packings (short tubular rubber seals that fit over dowels) OEM Ref. # 12115-300-000
Clutch Adjuster O-Ring Pk/2
Clutch Adjuster O-Rings Pk/2, Replaces OEM# 91301-704-000
Clutch Adjust Screw O-Ring Pk/2
Clutch Adjust Screw O-Rings Pk/2, Replaces OEM# 91301-704-000
Water Pump
Water Pump Kit with Gaskets and O-Rings, Replaces OEM# 19200-MG9-681 / 19200-371-010 / 19200-371-020 / 19200-MG9-680 / 19200-371-000.
Deluxe Carb Rebuild Kit
Deluxe Carb Rebuild Kit Kit Includes: Carb Top Gasket X2, Float Bowl Gasket X2, Main Jet Holder X2, Main Jet #110, Main Jet #112, Needle D270, Needle D337, Float Needle X2, Slow Jet #42, Pilot Jet #42, Various O-Rings.
Carb Rebuild Kit
Carb Rebuild Kit. Contains: Float Bowl Gasket, Carb Top Gasket, Float Needle, Main Jets #90 and #95, Slide Needle #59A, Jet Needle Holder, 9 Various O-Rings, Needle Screw w O-Ring and Washer. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require
Carb Rebuild Kit
Carb Rebuild Kit. Contains: Float Bowl Gasket, Carb Top Gasket, Float Needle & Seat, Pilot Jet (#38), Adjusting Screw & Spring, Jet Needle (D274), Jet Needle Holder, 3 Various O-Rings. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require
Carb Rebuild Kit
Carb Rebuild Kit. Contains: Float Bowl Gasket, Carb Top Gasket, Float Needle, Main Jet (#90), Jet Holder, Jet Needle (#D376), Adjusting Screw & Spring, E-Clip, 6 Various Rubber O-Rings. Note: Each Kit Rebuilds One Carb, Order the Quantity of Kits you Require
Intake Carb Holder Set
Intake Carb Holder Set OEM Ref # 2A2-13586-00 LH 1 Pc, 2A2-13596-00 RH 1 Pc, 1L9-13556-00 Gaskets 2 Pc
Intake Carb Holder Set
Intake Carb Holder Set OEM Ref # 2H7-13586-00 LH 2 Pc, 10M-13556-00 Gaskets 4 Pc, 2H7-13596-00 2 Pc
Intake Carb Holder Set
Intake Carb Holder Set OEM Ref # 10L-13586-01 LH 1 Pc, 10L-13596-01 RH 1Pc, 93210-44545 Gaskets 2 Pc
Intake Carb Holder Set
Intake Carb Holder Set OEM Ref # 24M-13586-01 LH 1 Pc, 24M-13596-01 RH 1 Pc, 93210-44545 Gaskets 2 Pc
Intake Carb Holder Set
Intake Carb Holder Set OEM Ref # 33M-13586-01 2 Pc, 33M-13596-01 2 Pc, Gaskets 4 Pc
Carb Rebuild Kit
Deluxe Carburetor Rebuild Kit Includes: Chamber Gasket, Valve Needle, Needle Jet D322, Air Screw, Air Spring, Main Jet #78, Main Jet #115, Needle Jet, Various O-Rings.
Gas/Fuel Tank Cap
OEM Style Gas/Fuel Tank Cap with Rubber Gasket Already Installed, Replaces OEM # 17620-399-010 Note: Does not include a chain attached to this cap.
Performance Charging Kit ~ Lithium Ion Version
Rick's Electrics High Performance Hot Shot Lithium Ion Battery Compatible Charging Kit. This high performance Hot Shot charging kit includes both a new rotor and a lithium-ion battery compatible combination rectifier / regulator which looks like the stock unit and mounts in the same location. The kit will put out approximately 150 watts: 50% over stock. You do NOT need to replace your OE stator unless it tests bad, this kit works with the OE stator. This kit is Not for use with standard lead acid batteries. The voltage set point is 14V +/- .2. Please contact the manufacturer of your Lithium Ion Battery to ensure our product has the correct set point for their product.
Performance Charging Kit
Rick's Electrics High Performance Hot Shot Standard Lead Acid Battery Compatible Charging Kit. This high performance Hot Shot charging kit includes both a new rotor and a standard lead acid battery compatible combination rectifier / regulator which looks like the stock unit and mounts in the same location. The kit will put out approximately 150 watts: 50% over stock. You do NOT need to replace your OE stator unless it tests bad, this kit works with the OE stator. This kit is NOT for use with lithium ion batteries. We sell a charging kit for lithium ion batteries as well.
Starter Motor
Rick's Electrics Starter Motor, Replaces OEM# 31200-300-030 This starter motor features an upgraded 4-Brush permanent magnet design & comes with the battery cable.
Alternator Stator Wire Harness
Alternator Stator Wire Harness, This Harness has the Same 7 Wire Plug as the OEM part and Hooks up Without Alterations. Replaces OEM # 31110-300-154
Clutch Adjuster Bolt
Clutch Adjuster Bolt, Replaces OEM# 22841-425-000
Special Clutch Washer
Special Angled Clutch Washer (16mm), Replaces OEM# 90481-292-000
Stator Sub Harness
Stator Sub Harness, Replaces OEM # 26001-1202