Honda ►
-
Pick your Honda motorcycle from the list below►
- Honda
Honda CB Charging Rotor
Honda CB Charging Rotor, Replaces OEM # 31110-426-832 This rotor is a high quality OEM style replacement for Honda field coil rotors. The field coil is wound to stock specifications. This rotor is an easy installation and provides years of trouble free reliability from your Honda engine. Easy bolt-in installation just like the stock rotor.
Ignition Switch
Ignition Switch with 2 Keys - 2 Wires - Replaces OEM# 35100-324-761 / 35100-111-671 / 35100-240-010 / 35100-324-000
Denso Ignition Contact Points
Contact Points (1pc.) - Replaces OEM # 30202-107-004 / 30202-216-004 / 30202-107-154 These points are for Nippondenso ignitions Only. They are NOT for Hitachi or Kokusan Ignitions. Please check which type you have before ordering. Honda used different ignition systems on some of the same years of bikes.
Rear Brake Light Stop Switch Spring
Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-107-010
Rectifier Regulator
Rectifier Regulator, Replaces OEM# 31700-102-731 / 31700-107-782 Durable and Reliable 4 Pin - 6 Volt Rectifier / Regulator, Features Fins for Improved Cooling.
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-15001 Band Overall Size: 5.25" (133mm) Measuring from the inside of the brackets.
Ignition Coil with Condenser
Ignition Coil with Condenser, Replaces OEM# 30500-950-405 6 Volt, 5.4k Ohm.
Tail Light Lens
Tail Light Lens OEM Ref # 33702-329-671 / 33702-092-671
Front Cable/ Stop Switch Clip
Front Cable Clip, This Clip Holds the Stop Switch Wires to the Cable to Keep Things Tidy. Replaces OEM # 45465-270-000
Tail Light Assembly
Tail Light Assembly, Replaces OEM# 33701-329-671 2 Wires
Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670
Stop Light Switch
Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405
Ignition Spark Unit
Aftermarket Ignition Spark Unit for Honda - 2 units required per bike. Replaces Honda OKI or NEC units. Replaces OEM Ref # 30400-MA4-601
Rear Signal Lamp Stay
Rear Signal Lamp Stay - Chrome Honda Rear - OEM Ref # 33607-323-670 65mm Long.
Rectifier / Regulator
Rick's Electric Brand OEM Style Honda Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier.
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-392-000 Fits: Honda CB750F (1975-76) Supersport
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-445-670 Fits: Honda CB750F (1979) Supersport
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-374-000 Fits: Honda CB550K (1974-75)
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-390-010 / 32100-390-000 Fits: Honda CB550F (1975-77) Supersport
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-422-000 Fits: Honda CBX (1979-80)
Wire Harness
Main Wire Harness Loom - OEM Ref. # 32100-393-770 Fits: Honda CB750A (1977-78) Hondamatic
Points Cover Screws
Points Cover Screws (Set of 2). Fits: ALL 1969-1978 Honda CB750 Points Covers and Our Points Cover (Part #13-0000).
Rectifier/Regulator
Rick's Electric Brand OEM Style Honda Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier; OE plugs and installation instructions are included. High quality Part.
Wire Harness
Main Wire Harness Loom - OEM Ref # 32100-426-770 Fits: Honda CB650 (1979) NOTE: These fit model years listed. Other years of CB650 use a different OEM part number (there is a difference!).
Front Fork Headlight Mounting Cover Set
Front Fork Headlight Mounting Cover Set, Includes the Right and Left Fork Covers. Replaces OEM# 51602-341-701 and # 51606-341-701. Fits: Honda CB750K (1973-76)
Front Fork Headlight Mounting Cover Set
Front Fork Headlight Mounting Cover Set, Includes the Right and Left Fork Covers. Replaces OEM# 51606-341-670XW and # 51602-341-670XW. Fits: Honda CB750K (1972)
USA/Canadian Version Wire Harness
USA/Canadian Version Main Wire Harness Loom - OEM # 32100-377-030 Fits: Honda CB400F (1975-77) Supersport NOTE: These fit model years and type listed, other years and bikes use a different OEM part number (there is a difference!).
7" Halogen Lamp Conversion Kit
7" Halogen Lamp with 60/55 watt H4 P43T Halogen Bulb and parking light. E-Mark certified for RH drive European Market use (can also be used in North America). Replaces stock sealed beam and fits into stock retainer. Fits: All Honda CB750's (1969-78)
CB900F 1982 Tail Section Stripe & Logo Decal Set ~ Silver Model
Honda CB900F (1982) Supersport Tail Section Stripe & Logo Decal (Sticker) Set for the Silver Model. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB900F 1982 Tail Section Stripe & Logo Decal Set ~ Black Model
Honda CB900F (1982) Supersport Tail Section Stripe & Logo Decal (Sticker) Set for the Black Model. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB750F 1982 Tail Section Stripe Decal Set ~ Silver Model
Honda CB750F (1982) Supersport Tail Section Stripe Decals (Sticker) Set for the Silver Model. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB750F 1982 Tail Section Stripe Decal Set ~ Black Model
Honda CB750F (1982) Supersport Tail Section Stripe Decals (Sticker) Set for the Black Model. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB750F 1980 Tail Section Stripe Decal Set ~ Black Model
Honda CB750F (1980) Supersport Tail Section Stripe Decals (Sticker) Set for the Black Model. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
LED Upgraded Headlight Assembly
LED Upgraded Headlight Assembly - Chrome Side Mount Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. H4 LED Bulb with 6000k white brightness and Bulb Dust Boot for North American Market CB750's that drive on the right side of the road. Fits: All Honda CB750's (1969-78)
Headlight Assembly
Chrome Side Mount Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Halogen Lamp unit with 12v 60/55 Bulb (P43T base) and Bulb Dust Boot for North American Market CB750's that drive on the right side of the road. Fits: All Honda CB750's (1969-78)
Headlight Assembly ~ European Version
Chrome Side Mount European Version Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. 60/55 watt H4 P43T Halogen Bulb and parking light. E-Mark certified for European Market use (can also be used in North America). Fits: All Honda CB750's (1969-78)
Rectifier/Regulator
Rick's Electric Brand OEM Style Honda Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier; stock type plugs and installation instructions are included. Dimensions 68mm Length, 94mm Width, 26mm Height, Hole Distance 80.0mm Center to Center. High quality Part. Note: May require a custom mounting job. Works great if attached with one bolt and nut where the safety starter switch was originally located (can bypass that switch).
Battery Box Rubber "A"
Battery Box Rubber "A", Replaces OEM # 50323-300-010 This rubber is fastened into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Used Per Bike, CB750K (1977-78) - 3 Used Per Bike, CB750F (1975-76) Supersport - 4 Used Per Bike, CB750F (1977-78) Supersport - 3 Used Per Bike, CB750A (1976-78) Hondamatic - 2 Used Per Bike Note: Order the Quantity of Rubbers you Require
Ignition Coil
Ignition Coil, Replaces OEM # 30500-292-672 / 30500-312-000 / 30500-286-004 / 30500-286-007 / 30500-310-670 12 Volt Single Output Ignition Coil with spark plug wire. Primary resistance 5 Ohms. Spark plug wire is 19" long, Mounting holes are approximately 80mm (3.15") apart center to center, 6.5" blue wire with dual female bullet connector, 5.25" black/white line wire with male bullet connector. Note: If you are replacing a beige Honda coil, you will need to mount it backwards as the wires come out of it differently. Other than mounting, functionality will be the same.
Battery Box Rubber Set
Battery Box Rubber Set. Includes Battery Rubber X1, Battery Box Collar X1, Bolt X1 and Washer X1. This set fastens into the top section of the Battery Box. Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike, CB750K (1977-78) - 3 Sets Used Per Bike, CB750F (1975-76) Supersport - 4 Sets Used Per Bike, CB750F (1977-78) Supersport - 3 Sets Used Per Bike, CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike Note: Order the Quantity of Sets you Require
Alternator Cover Gasket
Alternator Cover Gasket OEM Ref # 11395-ME9-000
Horn Sub Harness
Horn Sub Harness, This is the Harness that Attaches to the Horns. Replaces OEM # 32103-431-000
Magnetic Starter Solenoid Relay Switch
Magnetic Starter Solenoid Relay Switch, Replaces OEM# 35860-MCA-A61 / 35850-MCA-701 / 35850-MZ0-J10
Handlebar Switch Kill Switch Cover
Handlebar Switch Kill Switch Chrome Plastic Cover. This cover will pop over your kill switch button and greatly improves the look of the handlebar switch.
Alternator Assembly
100Amp Quality Aftermarket Alternator Assembly. This is a direct replacement that covers the OEM#'s 31100-MCA-700 , 31100-MCA-A41 , 31100-MCA-A40 , 31100-MCA-S41 , 31100-MCA-A61.
Turn Signal Replacement Lens ~ Smoked
Turn Signal Replacement Lens - Smoked - Front Or Rear OEM Ref # 33402-431-782
Tail Light Lens Screws
Tail Light Lens Screws, Set of 4. Replaces OEM # 90147-147-671
Rick's Electrics OEM Style CDI Box
Rick's Motorsport Electrics Brand CDI Box, Replaces OEM# 30400-437-023 / 30400-446-000 / 30400-437-003 / 30400-437-013 This is a brand new direct replacement that is designed to perform to the OEM specifications. A reliable & affordable option for the discontinued OEM product! Just plug it in & Get Fired Up!
Rick's Electrics ~ Starter Rebuild Kit
Rick's Electrics Brand Starter Rebuild Kit. Includes Armature, Brushes and Bearings. If your bike is a GL1500A Aspencade This Kit ONLY works with single post starter motors. Ensure your starter motor is single post before ordering.
Signal Lamp Lens w Gasket & Screws - Red
Red Front/Rear Turn Signal Lamp Lens with Gasket and 2 Screws. OEM Ref # 33402-268-671
Tail Light Lens
Red Tail Light Lens with Amber Side Reflectors. OEM Ref # 33702-077-671
Rick's Electrics ~ Stock Style Regulator
Rick's Electrics Brand Stock Style Regulator If you also need the Rectifier we sell that as well.
Rear Turn Signal
Rear Turn Signal, Replaces OEM# 33500-KL3-671 / 33500-KL3-672 / 33550-KL3-671 / 33550-KL3-672 / 33500-MG2-672 / 33500-KL4-670 / 33550-KL4-670 / 33500-MM9-720 / 33550-MM9-720 / 33500-KVO-670 / 33550-KVO-670 / 33500-KW3-770 / 33550-KW3-770
Front Brake Stop Switch Assembly
Front Brake Stop Switch Assembly, Replaces OEM# 35340-413-013
Rectifier Regulator
Rectifier Regulator OEM Ref # 31600-MCJ-641
Horn Sub Harness
Horn Sub Harness, This is the Harness that Attaches to the Horn. Replaces OEM # 32103-463-000
Taillight Sub Harness
Taillight Sub Harness "A", Replaces OEM # 32101-463-000
Wire Harness
Main Wire Harness Loom - OEM Ref # 32100-371-670 NOTE: These fit model year and type listed, other years and types of GL's use a different OEM part number (there is a difference!).
Rear Turn Signal Stay
Rear Turn Signal Stay, Replaces OEM# 33607-286-871 / 33607-286-871B Can be used on the left or right side. Sold Each, Order the Quantity you Require.
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 50332-371-000
Front Stop Switch
Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721
Starter Motor Seal
Starter Motor Seal - Size 24.4 x 3.1, Replaces OEM# 91312-MG7-003 / 91309-300-000 / 91309-425-003
Radiator Fan Cooling Switch O-Ring
Radiator Fan Cooling Switch O-Ring, Replaces OEM# 91307-PH9-000
Dynatek Dyna S Ignition System (Ultimate Kit)
Dynatek Dyna S Ignition System (Ultimate Kit) with 2X Dynatek Brand Performance 3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
Dynatek Dyna S Ignition System (Premium Kit)
Dynatek Dyna S Ignition System (Premium Kit) with 2X Aftermarket Generic Performance 3.3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
Electronic Ignition System
Electronic Ignition System. Direct plug-in fitment. Increase RPM 100% tested before shipment, high reliability and high performance!
Contact Point ~ Right Side
Contact Point ~ Right Side - Replaces OEM# 30203-292-003 / 30203-292-154
Alternator Cover Gasket
Alternator Cover Gasket - OEM Ref. # 11691-426-306
Rectifier Regulator
Rectifier Regulator 2 Plugs: 6 Space/5 Wires 4 Space/3 Wires OEM Ref # 31600-ME5-003 / 31600-ME5-013
Rectifier Regulator
Rectifier Regulator 8 Wire (1 Six Prong Plug With 5 Wires, 1 Four Prong Plug With 3 Wires) OEM Ref # 31600-460-731 / 31600-426-000
Stock Style Stator
Rick's Electric Brand High Performance Stock Style Stator. Direct plug-in stator complete with all rubbers and OEM style end plug.
Rear Brake Light Stop Switch Spring
Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-393-000
Headlight Lens Insert
Headlight Lens Insert, Replaces OEM# 33100-KL4-611 / 33100-KL4-671 / 33100-KL4-670 This lens has the mounts on the SIDES not the top/bottom so may require some custom mounting work.
Headlight Reflector Rubber Base
Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require
Tail Light / Brake Light Harness
Tail Light / Brake Light Harness, Replaces OEM# 33711-371-000
Stop Switch Assembly
Stop Switch Assembly with Spring, Replaces OEM# 35350-166-005
Rectifier
Rectifier with female connector, Replaces OEM# 31700-455-671 / 31700-358-305 / 31700-358-013
Rick's Electrics ~ Alternator Stator
Rick's Electrics Brand OEM Style Alternator Stator - Installation Instructions Included.
Stop Switch / Rear Brake Light Spring
Stop Switch / Rear Brake Light Spring, Replaces OEM# 35357-046-000. This is the spring that connects the rear brake light switch to the brake pedal.
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
Condenser
Condenser Replaces OEM # 30250-041-005 / 30250-035-005 Hitachi Type
Turn Signal Lamp
Turn Signal Lamp - Black Left Front Single Filament - 12 Volt OEM Ref # 33350-MG2-671
Stop Light Switch
Front Stop Light Switch OEM Ref # 35340-MA5-671 / 35340-MM5-600 / 35340-ML7-000
Ignition Switch
Ignition Switch w Keys, Replaces OEM# 35100-KB7-017 Plug and play fit for the models listed.
Alternator Stator
Alternator Stator OEM Ref # 31120-ME9-005
Stock Style Stator
Stock Style Stator, Replaces OEM# 31120-ME5-842 / 31120-ME5-005 / 31120-ME5-015 / 31120-ME5-025.
Rick's Electrics - OEM Style Rectifier Regulator
Rick's Electrics Brand OEM Style Rectifier / Regular.
Rick's Electrics - Performance Style Rectifier Regulator
Rick's Electrics Brand Hot Shot Performance Style Rectifier / Regular. Specially designed for optimal performance and a cooler running rectifier regulator.
Rick's Electrics - Lithium Ion Battery Compatible Rectifier Regulator
Rick's Electrics Brand Lithium Ion Battery Compatible Style Rectifier / Regulator. Designed with a lower voltage set point (As used in Lithium Ion Batteries). Instructions included. Not for use with standard lead acid batteries.
Rick's Electrics ~ Stock Style Rectifier
Rick's Electrics Brand Stock Style Rectifier. If you also need the Regulator we sell that as well.
Rick's Electrics ~ Starter Motor
Rick's Electrics Brand Starter Motor
NGK Spark Plug
NGK DR8ES-L Spark Plug
Tail Light Cable Set
Tail Light/Brake Light Cable Set of 3. Replaces OEM # 33711-323-000 (Tail Light Sub Cable), OEM # 33712-300-003 (Taillight Ground Cable) and OEM # 33713-323-000 (Stop Light Sub Cable).
Alternator Stator Wire Harness
Alternator Stator Wire Harness. Connects to the Stator and Field Coil. Replaces OEM # 31110-333-000
Sub Wire Harness
Sub Wire Harness (Junction Panel Harness). This is the Sub Harness on the bike that many electrical components connect to such as the fuse box, starter switch and rectifier. Replaces OEM # 32105-390-000
Wire Harness
Main Wire Harness Loom - OEM Ref # 32100-460-000 NOTE: These fit model years and type listed, other years and bikes use a different OEM part number (there is a difference!).
Fuse Box Assembly
Fuse Box Assembly with Fuses, Replaces OEM# 38200-371-153. Includes 3 Extra Fuses in the Cover.
Bar Switch Assembly - Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side. Replaces OEM # 35300-319-670