Honda ►
-
Pick your Honda motorcycle from the list below►
- Honda
Chrome Exhaust Clamp
Chrome Exhaust Clamp, 14 Fin Type, Center to Centre Mounting Hole Diameter 55mm apart. Replaces OEM # 18231-323-000 / 18231-323-010 / 18231-333-010
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require
Points Cover Screws
Points Cover Screws (Set of 2). Fits: ALL 1969-1978 Honda CB750 Points Covers and Our Points Cover (Part #13-0000).
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Chrome Side Grab Bar
Chrome Side Grab Bar, Replaces OEM # 50316-300-030 Replace that old worn out grab bar with a new one to add to the look of your bike! Some people put these on both sides. Fits: Honda CB750K (1969-71), CB750K (1972-76) * fits if you don't have the Full Grab Rail installed * Fits: Honda CB400F (1975-77) Supersport * Fits without any modifications but has a slightly different angle then the stock type *
Seat Cover
Replacement Seat Cover Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750SC (1982-83) Nighthawk Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference. No "Honda" text printed on back of seat cover.
Seat Cover
Replacement Seat Cover (No hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB700SC (1984-86) Nighthawk Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Gas Tank Emblem
Gas Tank Emblem, Replaces OEM# 87122-300-020 / 87121-300-020 Fits: Honda CB750K (1969) CB750K (1970) - Frame Number 1044649 and lower Sold Each, Order the Quantity you Require
Stock Type Speedo/Tach Clamp Hardware Set
8 Speedo/Tach Clamp Hardware Set. This Set includes hardware for both speedo and tach clamps. Fits: Honda CB750K (1969-72) Stock Type Speedo and Tach Clamps This hardware set is used with our parts #73-1051 and #73-1052.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright.
There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam.
Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available.
Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam.
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright.
There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam.
Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available.
Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam.
Exhaust Flange Clamp with Bolt ~ Right Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Right Side of the Bike. Replaces OEM # 18231-300-010 Fits: Honda CB750K (1971-76) Right Side Muffler Note: Each Bike Requires 2 Right Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Exhaust Flange Clamp with Bolt ~ Left Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Left Side of the Bike. Replaces OEM # 18232-300-010 Fits: Honda CB750K (1971-76) Left Side Muffler Note: Each Bike Requires 2 Left Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Warning & Service Label Decal Set
Honda XL250 (1972) USA Model Warning & Service Label Decal (Sticker) Set - 9pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB750K 1972-76 Seat Assembly
Stock Style CB750K 1972-76 Seat Assembly, Replaces OEM# 77200-341-701 / 77200-341-000 / 77200-341-700. This Quality Seat Comes Complete with the Strap, Chrome Trim, Bottom Rubbers etc and is ready For a Quick and Painless Install! Back of Seat does not say "Honda"
Seat Cover
Replacement Seat Cover (No trim or hardware included just re-use existing hardware). Does NOT have "Honda" printed on cover. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB1000C (1983) Custom Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1969-70) WITH THE DUCK TAIL STYLE SEAT ONLY. If you have a CB750K 1970 see our listing below to compare the regular style to the duck style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB550K (1977) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750F (1975-78) Supersport Seat This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB650 (1980-82), CB650C (1980-81) Custom Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB400F (1975-77) Supersport Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions. Fits: the Original Stock Honda CB350F (1972-74) Supersport Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1978) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Strap (No hardware, strap buckles or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750L (1979) Limited Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1980-82) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB650 (1979) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB550K (1974-76), CB500K (1971-73) Seat This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB550K (1978) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No hardware or chrome trim included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB550F (1975-77) Supersport Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250K 72-75 and XL350K 74-75 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250K 76-78, XL350K 76-78 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250S 79-81, XR250 79-80, XL500S 79-81 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250S 1978 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250R 82-83, XL500R 82 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL100 77-78, XL125 74-78 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL100S 79-80, XL125S 79 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL125S 80-82 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL175 73-78 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover GL1000 1975-77
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website.. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover GL1000 1978-79
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Black Seat Cover Set GL1100 1983
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Black Seat Cover Set GL1100 1980-82
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1970-71) WITH THE NON DUCK TAIL STYLE SEAT ONLY If you have a CB750K 1970 see our listing above to compare the regular style to the duck tail style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Red/Black Seat Cover GL1200 1984-86
High Quality Replacement Red/Black Seat Covers. Features a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, made of special cold resistant outdoor 4 way stretch marine vinyl material. These fasten just like the original covers. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Black Seat & Back Rest Cover
High Quality Replacement Black Seat & Back Rest Cover. Features a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, made of special cold resistant outdoor 4 way stretch marine vinyl material. These fasten just like the original covers. PLEASE NOTE BELOW This cover fits the earlier style of seat, the lower passenger Lombard support are thinner on this models and also the passenger backrest sides do not go out as far. this cover does not have any storage compartments built in. please compare your seat to the one that is shown here to ensure the right on is ordered. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Black Seat Cover GL1200 1984-86
High Quality Replacement Black Seat Covers. Features a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, made of special cold resistant outdoor 4 way stretch marine vinyl material. These fasten just like the original covers. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Black Seat Cover GL1800 2001-17
High Quality Replacement Black Seat Covers. Features a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Does NOT have "Honda" printed on cover. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, made of special cold resistant outdoor 4 way stretch marine vinyl material. These fasten just like the original covers. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference. This seat cover does Not have any storage compartments built in.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your original seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Full Gray/Black Cover Set GL1100 1980-82
Replacement Full Gray/Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright.. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
Full Black Cover Set GL1100 1980-82
Replacement Full Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
Exhaust Hardware Set
Exhaust Hardware 10 Piece Set. This Set includes various hard to find hardware needed to install the Stock OEM Type Exhaust. Set Includes: X1 stand stopper rubber C 95011-63000 X1 stand stopper rubber A 95011-63000 X2 pillon step bolt 90146-300-020 X2 nut 94030-12000 X2 flat washer 94102-12000 X2 spring washer 94111-12000 Fits: Stock Type Exhaust on Honda CB750K (1969-76) Note: Exhaust Flange Clamps and Exhaust Pipe Flanges with Hardware are Not Included in this Set, We Sell them Separate.
Red/Black Seat & Back Rest Cover GL1500
High Quality Replacement Red/Black Seat & Back Rest Cover. Features a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, made of special cold resistant outdoor 4 way stretch marine vinyl material. These fasten just like the original covers. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. PLEASE NOTE BELOW This cover fits the earlier style of seat, the lower passenger Lombard support are thinner on this models and also the passenger backrest sides do not go out as far. this cover does not have any storage compartments built in. please compare your seat to the one that is shown here to ensure the right on is ordered. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 44 Bolts and 3 Allen keys for a total of 47 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Tail Light Lens Screws
Tail Light Lens Screws, Set of 4. Replaces OEM # 90147-147-671
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 35 Bolts and 3 Allen keys for a total of 38 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 36 Bolts and 2 Allen keys for a total of 38 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 20 Bolts and 1 Allen key for a total of 21 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 40 Bolts and 4 Allen keys for a total of 44 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 51 Bolts and 1 Allen key for a total of 52 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Cylinder Head Emblem
Cylinder Head Emblem with Attachment Clips, Replaces OEM# 12312-371-610 / 12312-371-611
Clutch Release Actuator Assembly
Clutch Release Actuator Assembly, Replaces OEM# 22830-371-000 / 22860-300-006 / 22820-371-000 / 22841-300-000 / 91301-426-010
Side Cover Rubber
Side Cover Rubber, Replaces OEM# 83610-371-000 These are the rubbers at the top of each side cover that hold it in place. 2 Used per side cover - Sold Each - order the quantity you require.
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-046-000 / 22860-041-000
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 24 Bolts and 2 Allen keys for a total of 26 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
Fuel Tank Emblem
Fuel Tank Emblem, Replaces OEM# 87121-371-000 / 87122-371-660 / 87121-371-660 / 87121-371-980 Sold Each, Order the Quantity you Require
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 34 bolts and 3 Allen keys for a total of 37 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, cam end covers and left and right crankcase covers.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 58 Bolts, 13 Washers and 2 Allen keys for a total of 73 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, the left and right engine covers - points, clutch, alternator, sprocket and starter motor covers. The washers go under 8 of the cylinder head cover screws with washers from the factory, and one of the alternator cover screws, and the two starter motor cover screws.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 34 Bolts and 3 Allen keys for a total of 37 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 28 Bolts and 1 Allen key for a total of 29 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Chain Guard
Chain Guard, Replaces OEM# 40510-341-010B This flat black chain guard replaces the original metal one which was prone to rusting. Easy stock mount, this is a simple way to spruce up the look of your bike!
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Clutch Lever Return Spring
Clutch Lever Return Spring. This is the Spring Located Behind the Clutch Cover. Replaces OEM # 22815-300-000
Clutch Adjuster Bolt
Clutch Adjuster Bolt, Replaces OEM# 22841-425-000
Glove Box/Fairing Pocket Cover
Replacement Glove Box/Fairing Pocket Cover. Each cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available.
Fuse Box Plate Cover Screw Set
Black Fuse Box Plate Cover Screw (Set of 2). Replaces OEM # 93700-05020-0G
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
Billet Aluminum Upper Triple Tree Clamp
Custom Billet Aluminum Machined Upper Triple Tree Clamp. This billet triple has 2X 6mm mounting bosses 50mm apart on the underside of the top triple to accommodate various aftermarket and custom designed instrument mounts for your aftermarket gauges. Designed so the top triple has a rounded top edge with a stylish inset and makes an excellent replacement for the stock cast item when using clip-on bars! This piece was designed to make it very easy for the average Cafe builder to modify their motorcycle. Very High quality, machined in North America. Clip on bars not included and your stock bars will NOT mount to this piece.
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM#40513-310-000 (Rubber), OEM#40514-310-000 (Metal Collar) and OEM#92101-06020-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar and Silver Colored Flange Bolt.
Carb Bolt Kit
Carburetor Bolt and Washer 24 Piece Kit. This is a Complete Bolt Kit for All 4 Carburetors.
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Carburetor Cap Screw Set/8
Carburetor Cap Screw Set/8 with Metal Washers.
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Clutch Adjust Screw O-Ring Pk/2
Clutch Adjust Screw O-Rings Pk/2, Replaces OEM# 91301-704-000
DOHC Screw Set
71PC DOHC Screw Set, Includes Front Stay Plate Screws (8), CV Cap Screws (8), Throttle Cable Bracket Screw (1), Rear Stay Plate Screws (8), Vacuum Petcock Screws (6), Bowl Screws (12), Accelerator Pump Cover Screws (3), Air Cutoff Screws (8), Choke Cable Clamp Screw (1), Throttle Plate Screws (8) and Choke Plate Screws (8).
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000
Tappet Adjuster Screw & Nut Set
Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Exhaust Flange Clamps
Stock Type Exhaust Flange Clamp, Replaces OEM# 18231-392-000 Note: Each Bike Requires 4 Exhaust Flange Clamps. Order the Quantity you Require.
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 48 bolts and 4 Allen keys for a total of 52 pieces. These bolts are all smooth head Allen bolts and are for the alternator cover, cylinder head cover, points cover and left and right lower crank case covers.
Carburetor Screw Kit
Carburetor Screw Kit. Get a new set of screws to clean up the look of your carbs! Kit Includes: 4X - Drain Screws with O-Rings 16X- 4x12 Screws w Lock Washers 8X - 5x16 Screws w Lock Washers 2X - 6x14 Screws w Lock Washers