Honda ►
-
Pick your Honda motorcycle from the list below►
- Honda
Front Fork Top Bridge / Triple Tree Washer Kit
Front Fork Top Bridge / Triple Tree Washer Kit of 2 Washers. These washers are needed in order to avoid broken top triple trees when you tighten up your fork tube clamps. Replace # OEM 53235-300-000
Fork Internal Circlip Set
Fork Internal Circlip (50mm) Set/2, Replaces OEM # 94521-50000 Fits: Honda CB750K (1971), CB750K (1972) Frame Numbers Lower then #2093731 Only
Fork Tube Set
Fork Tube Set/2, Length (580mm or 22 13/16"), 35mm OD. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) NOTE: LENGTH is 22 13/16", one Inch Shorter then Stock Length for these Models below. Fits: Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 22 13/16" is the Length you would like
Fork Tube Set
Fork Tube Set/2, Length (585mm or 23"), 35mm OD. Fits: Honda CB750K (1969-71), CB750K (1972) Lower then Frame# 2093730 Only Before ordering Please Confirm 23" is the Length you would like
Shock Absorber Set ~ Stock Design
Stock Type Designed Shock Absorber Set - Chrome Body and Cover with Chrome Springs. These are modelled after the original stock shocks. Replaces OEM# 52400-455-670XW / 52400-390-681XW / 52400-292-670XW / 52400-323-010XW
The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 321mm (12.6") Center of Eye to Clevis.
Swing Arm Decal Set
Honda Swing Arm Decal (Sticker) Set - 2pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Shock Absorber Set ~ Stock Design ~ CB750K 1969-71
Stock Type Designed Shock Absorber Set - Chrome Body with Chrome Springs and Black Center. These are modelled after the original stock shocks made for the CB750K 1969-71. The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 336mm (13 1/4") Center of Eye to Eye. Stock Match for: Honda CB750K (1969-71) Will Also Fit: Honda CB750K (1972-78), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic
Shock Absorber Set ~ Stock Design ~ CB750K 1972-76
Stock Type Designed Shock Absorber Set - Chrome Body with Chrome Springs and Chrome Center. These are modelled after the original stock shocks made for the CB750K 1972-76. The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 336mm (13 1/4") Center of Eye to Clevis. Stock Match for: Honda CB750K (1972-76) Will Also Fit: Honda CB750K (1969-71), CB750F (1975-78) Supersport, CB750A (1976-78) Hondamatic
Fork Tube Set
Fork Tube Set/2, Length (605mm or 23 13/16"), 35mm OD. NOTE: LENGTH is 23 13/16", one Inch Larger then Stock Length for these Models below. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) Also Fits These Models, Confirm the 605mm Length is what you Require Before Ordering Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 23 13/16" or 605mm is the Length you would like
Fork Cap O-Ring (Set of 2)
Fork Cap O-Ring Set of 2. Size 33.2 x 2.4mm. Replaces OEM # 91356-KF0-003
Fork Seals
Fork Seals Set/2 37 X 48 X 12.5
Headlight Reflector Rubber Base
Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require
Fork Seal Stopper Metal Ring Pk/2
Fork Seal Stopper Metal Ring Pk/2, Replaces OEM # 51447-KL4-951 This is the Metal Ring above the Fork Seal.
Grease Fitting Nipple (Pk/2)
Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001
Swing Arm Bushing Set
Swing Arm Bushing Set/2. OEM Ref # 52108-300-300 Note: These Replace the factory plastic OEM Type Bushings.
Fork Dust Seals
Fork Dust Seals Set/2 39 X 58 OEM Ref # 91254-463-003
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Bronze Thrust Bushing Set/2
Bronze Thrust Bushing Set/2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set of brand-new bronze thrust bushings. Replaces OEM # 52109-283-300
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
Fork Seals
Fork Seals Set/2 31 x 43 x 10
Billet Aluminum Upper Triple Tree Clamp
Custom Billet Aluminum Machined Upper Triple Tree Clamp. This billet triple has 2X 6mm mounting bosses 50mm apart on the underside of the top triple to accommodate various aftermarket and custom designed instrument mounts for your aftermarket gauges. Designed so the top triple has a rounded top edge with a stylish inset and makes an excellent replacement for the stock cast item when using clip-on bars! This piece was designed to make it very easy for the average Cafe builder to modify their motorcycle. Very High quality, machined in North America. Clip on bars not included and your stock bars will NOT mount to this piece.
Swingarm Dust Seal Cap (Set/2)
Swingarm Dust Seal Metal Cap (Set/2). These Metal Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-283-010 X2
High Performance Kibblewhite Bronze Swingarm Bushing Set
High Performance Kibblewhite Bronze Swingarm Bushing Set/2. Replaces OEM# 52108-457-300, 52108-422-300. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite bronze bushings offers increased durability and better fitment then the OEM type bushings.
Stock Type Front Reflector Rubber Base
Stock Type Front Reflector Rubber Base - Replaces OEM# 33743-341-670
Rear Shock Swingarm Bushing
Rear Shock Swingarm Bushing, Replaces OEM# 52181-001-300 35mm Long, 23mm OD, 10mm ID. Sold Each, Order the Quantity you Require
Swingarm Dust Seal Cap (Set/2)
Swingarm Dust Seal Cap (Set/2). These Caps go on the Ends of the Swingarm Pivot. Replaces OEM # 52144-362-000 X2.
Shock Absorber Nut
Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require
Fork Cap O-Ring (Set/2)
Fork Cap O-Ring Set of 2. Replaces OEM # 91344-PC9-004
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Swingarm Dust Seal Cap Set
Swingarm Dust Seal Cap Set of 2, Replaces OEM# 52144-425-831
Fork Spacer Trim Set
Chrome Front Fork Spacer Trim Set/2. These are the Chrome Ribs that Cover the Top of the Fork Boots. Replaces OEM # 51608-300-000
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Steering Stem Nut
Steering Stem Nut, Replaces OEM # 90304-425-000 Sold Each, we also offer the washer for this nut
Custom Fork Boot Collars ~ Joker Machine
Joker Machine Brand ~ Custom Fully CNC Machined Fork Boot Collar Set/2. A great solution for giving your stock bike (with the sheet metal headlight ears), an open fork tube Cafe look, while giving you an upper attachment point in order to retain your stock accordion style O.E.M. fork Gaitors. Designed to fit easily onto 35MM fork tubes and may be adjusted up-or-down along the tube into position, then tightened into place with the recessed set screw located in the groove (totally invisible).
Swingarm Chain Slider
Swingarm Chain Slider, Replaces OEM# 52170-KK0-771
Fork Tube Set
Fork Tube Set/2, Length (555mm or 21.85"), 33mm OD. Replaces OEM# 51410-317-700 Before ordering Please Confirm 21.85" is the Length you would like
Fork Seals
Fork Seals Set/2 31 X 43 X 12.5
Fork Cover Rubber Set
Fork Cover Rubber Set/2, Replaces OEM # 51601-300-000
Fork Cap O-Ring (Set of 2)
Fork Cap O-Ring Set of 2. Replaces OEM # 91356-MB4-003
Stock Type Fork Gaitors
Black Stock Type Fork Gaitors (Set/2) OEM Ref. # 51611-300-000
Fork Gaiters
Fork Gaiters OEM Ref # 51611-300-000 Note: These are about 1.75" shorter then the stock type but will work fine
Fork Internal Circlip Set
Fork Internal Circlip (48mm) Set/2, Replaces OEM # 94521-48000
Fork Cap O-Ring Set/2
Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.
Steering Stem Head Lock Nut
Steering Stem Head Top, Thread on Lock Nut. Replaces OEM # 90302-425-830
Shock Absorber Set ~ Stock Design
Stock Type Designed Shock Absorber Set - No Upper Shroud Style All Chrome Shock Set/2. These are modelled after the original stock shocks. Replaces OEM# 52400-375-000 / 52400-375-611 / 52400-404-013 The original OEM shocks came with 3 position spring preload adjustments however we have upgraded these to 5 spring preload adjustments so you can better fine tune these shocks! 321mm (12.6") Center of Eye to Clevis. Upper mounting eye comes with rubber damper already installed. Please Note - The top eye width is 20mm. On some models you may need to add a washer(s) to shock mount when mounting
Fork Dust Boots
Fork Dust Boots Set/2 OEM Ref # 91254-400-771 / 91254-434-003
Fork DU Bushing Set
Fork DU Bushing Set 1 Piece Of Inner Bushing 1 Piece Of Outer Bushing
Fork Cover Rubber Washer Set
Fork Cover Rubber Washer Set/2. These are the Rubber Washers used between the Fork Cover and the Headlight Bucket.
Rear Shock Swingarm Bushing
Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require
Fork Dust Seals
Fork Dust Seals Set/2 41 X 54 OEM Ref # 91254-MM8-003 / 91254-MB4-003
Swing Arm Bushing Set
Swing Arm Bushing Set OEM Ref # 52108-457-300 Note: These Replace the factory plastic OEM Type Bushings.
Swingarm Pivot Bolt Locknut with Washer
Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM # 90354-268-000 (Locknut) and OEM # 90526-268-000 (Washer).
Fork Seal Backup Rings (Pk/2)
Fork Seal Backup Rings (Pk/2), Replaces OEM # 51452-319-010 These are the Rings that go Above the Fork Seals.
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Shock Absorber Washer
Shock Absorber Washer, Used when Installing Shocks. Replaces OEM # 90521-292-000 Note: Washers sold Each, order the quantity you require
Shock Absorber Set ~ 365mm Length
Shock Absorber Set - Chrome Body with Chrome Springs and End Cap - 365mm (14 3/8") Eye to Clevis. 4 Position spring preload adjustment, progressive wound heavy duty springs. Includes bushings, inserts, washers and spring preload wrench.
Shock Absorber Set
Shock Absorber Set - Chrome Body with Chrome Springs - 365mm (14 3/8") Eye to Clevis. 4 Position spring preload adjustment, progressive wound heavy duty springs. Includes bushings, inserts, washers and spring preload wrench.
Fork Dust Boots
Fork Dust Boots Set/2 OEM Ref # 51425-375-003 / 51425-375-005
Fork Dust Boot Set
Fork Seal Dust Boots (Set/2). 33mm Size, Replaces OEM # 91254-413-881
Shock Absorber Set
Shock Absorber Set - Black Body with Black Springs - 365mm (14 3/8") Eye to Clevis. 4 Position spring preload adjustment, progressive wound heavy duty springs. Includes bushings, inserts, washers and spring preload wrench.
Steering Stem Washer
Steering Stem Washer, Replaces OEM # 90503-425-000 Sold Each, order the quantity you require.
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000
Steering Stem Nut
Chrome Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 Note: Sold Each, order the quantity your require
Fork Leg Washer Set
Fork Leg Copper Washer Set (4) 8mm x 13mm x 1.5mm x 2pcs (OEM Ref 90544-283-000) 6mm x 10mm x 1mm x 2pcs (OEM Ref 90543-273-000)
Swing Arm Pivot Bolt Lock Nut and Washer
Swing Arm Pivot Bolt Lock Nut and Lock Nut Washer, Replaces OEM # 90354-425-830 (Nut), 90600-425-830 (Washer)
Rear Wheel Damper Rubber Set/5
Rear Wheel Damper Rubber Set of 5. Replaces OEM # 41241-MT8-003
Front Fork Seal Stopper Ring (Each)
Front Fork Seal Stopper Ring (Each). Diameter 1.8- 60. Sold Each, Order the Quantity you Require
Front Fork Seal Stopper Rings (Pk/10)
Front Fork Seal Stopper Rings (Pk/10). Diameter 1.8- 60.
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Progressive Front Fork Springs
Progressive Front Fork Spring Set/2 with Required Spacers and Washers. These Progressive Springs improve handling and overall ride quality. They Stop front end droop and diving during braking while improving cornering stability. A Great Performance upgrade for your Bike!
Stock Style Shock Absorber Set
Stock Style Shock Absorber Set/2, Replaces OEM# 52400-KB1-601 / 52400-437-003 / 52400-437-711 / 52400-437-770 / 52400-437-712. 395 Eye to Eye, Features a 5 Position Stepped Spring Pre-Load Adjuster Spring Diameter = 53.5mm, Top mounting hole ID = 10mm, Bottom mounting hole ID = 12mm.
Fork Seals
Fork Seal Set - 35 x 46 x 11. Made In Japan by OEM supplier. Replaces OEM # 91255-292-003
Steering Stem Bolt and Washer Set
Steering Stem Bolt and Washer Set. Includes 2 Bolts and 2 Washers. Replaces OEM # 92101-10040-0A X2 (Bolts) and OEM # 94102-10000 X2 (Washers).
Chain Guard Hardware Set
Chain Guard 9 Pc. Hardware Set. Includes 3 Bolts, 3 Metal Spring Washers and 3 Metal Washers. Replaces OEM # 92101-06014-0A (Bolts), OEM # 94111-06000 (Spring Washer) and OEM # 94101-06800 (Metal Washers).
Swing Arm Felt (Set/2)
Swing Arm Felt (Set/2), Replaces OEM # 52145-283-000
Handlebar Steering Lock
Handlebar Steering Lock/Fork Lock with Keys, Replaces OEM# 53600-086-007
Custom Type Black Fork Caps (Set/2) ~ Joker Machine
Joker Machine Brand ~ Custom Black Fork Cap Set of 2 with O-Rings. Replaces OEM # 90123-300-000 High quality CNC machined from billet aluminum, much lighter then the stock type. Gives your bike a great custom look. Made in the U.S.A.
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-461-003 / 91254-KAZ-003
OEM Type Shock Absorber Bolt
Chrome Shock Absorber Bolt, Replaces OEM # 93201-10032-0B / 93200-10032-0A Note: 2 Bolts Used Per Bike, Order the Quantity you Require
Fork Seals
Fork Seal Set - 33 x 44 x 8.9. Made In Japan by OEM supplier.
Fork Seals
Fork Seals Set/2 39 X 52 X 11
Fork Seals
Fork Seals Pk/2 27 x 39 x 10.5
Fork Seals
Fork Seals Set/2 48 x 58 x 10
Fork Seals
Fork Seals Set/2 37 X 50 X 11
Fork Seals
Fork Seals Set/2 33 X 46 X 11
Fork Seals
Fork Seals Set/2 45 X 57 X 11
Fork Seals
Fork Seals Set/2 41 X 54 X 11
Fork Dust Seals
Fork Dust Seals Set/2 OEM Ref # 91254-MN8-003
Fork Dust Boots
Fork Dust Boots Set/2
Fork Seals
Fork Seals Set/2 43 X 54 X 11
Fork Dust Seals
Fork Dust Seals Pk/2
Front Fork Seal Stopper Ring (Each)
Front Fork Seal Stopper Ring (Each). Diameter 1.8- 56. Sold Each, Order the Quantity you Require
Front Fork Seal Stopper Rings (Pk/10)
Front Fork Seal Stopper Rings (Pk/10). Diameter 1.8- 56.