Honda ►
-
Pick your Honda motorcycle from the list below►
- Honda
Handlebar Steering Lock
Handlebar Steering Lock/Fork Lock with Keys, Replaces OEM# 53600-086-007
Handlebar Rubber Boot
Handlebar Rubber Boot. Replaces OEM # 53180-425-010
Handlebar End Cap Set
Chrome Handlebar End Cap Set. Includes Left and Right Sides with Bolts.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Handlebar Clamp Set /2
Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Includes the 4 Bolts that Fasten the Handlebar Clamp in Place and 4 Covers that Snap into the Screw Tops to Give it a Super Clean Look! Replaces OEM# 91456-371-770 X4, 90185-371-000 X4
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53177-430-000 / 53176-428-010 One rubber for the left and one for the right side per set.
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.
Handlebar Switch Kill Switch Cover
Handlebar Switch Kill Switch Chrome Plastic Cover. This cover will pop over your kill switch button and greatly improves the look of the handlebar switch.
Handlebar - Stock Type ~ CB750 1972
Stock Type Handlebar for the CB750K (1972) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 28 1/2" - 648mm, Pull Back - 4" - 101mm, Inner Rise - 3 1/8" - 79mm, End Rise - 3" - 76mm, Center Width - 5 1/2" - 140mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-341-000 Note: These Are Drilled For Wires
Handlebar Brake Lever Pivot Bolt Set
Handlebar Brake Lever Pivot Bolt, Washer & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Washer and Nut. Replaces OEM # 90114-422-000 (Bolt).
Handlebar - Stock Type ~ CB750 1969-71
Stock Type Handlebar for the CB750K (1969-71) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 3/8" - 136mm, Inner Rise - 5 1/4" - 133mm, End Rise - 6 7/8" - 175mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-300-000 Note: These Are Drilled For Wires
Honda GL1000 Goldwing 1978-79 Replica Handlebar
Honda GL1000 Goldwing 1978-79 Replica Handlebar. Replaces OEM # 53100-431-780 / 53100-431-670 Thickness - 7/8" - 22mm, Length - 32 1/4" - 820mm, Pull Back - 7 3/4" - 196mm, Inner Rise - 9" - 228mm, End Rise - 10" - 254mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled NO There are Holes For Switch Positioning.
Honda GL1000 Goldwing 1977 Replica Handlebar
Honda GL1000 Goldwing 1977 and GL1000L 1976 Replica Handlebar. Replaces OEM # 53100-371-980 / 53100-371-660 Thickness - 7/8" - 22mm, Length - 32 3/8" - 822mm, Pull Back - 8" - 203mm, Inner Rise - 8 3/4" - 222mm, End Rise - 9 3/4" - 248mm, Center Width - 6 1/2" - 165mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 1/2" - 114mm, Control Length - 10 1/4" - 260mm, Drilled YES There are Holes For Internal Wiring and Switch Positioning
Honda GL1100 Goldwing 1980-83 Replica Handlebar
Honda GL1100 Goldwing 1980-83 Replica Handlebar. Replaces OEM # 53100-MB9-800 / 53100-MB9-670 / 53100-463-670 Thickness - 7/8" - 22mm Length - 32 1/8" - 820mm Pull Back - 10" - 254mm Inner Rise - 8 3/4" - 222mm End Rise - 10" - 254mm Center Width - 6 1/2" - 165mm Base Width - 9 1/2" - 241mm Knurl Width - 4 1/2" - 114mm Control Length - 10 1/2" - 266mm Drilled NO There are Holes For Switch Positioning
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90113-422-000 (Bolt) and OEM # 94002-06000-0S (Nut).
Handlebar Brake Lever Pivot Bolt & Nut Set
Brake Lever Pivot Bolt & Nut. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-300-000
Handlebar Brake Lever Pivot Bolt & Nut Set
Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-MA5-671 (Bolt) and OEM # 94050-06000 (Nut)
Handlebar - Stock Type ~ CB550F 1975-76
Stock Type Handlebar for the CB550F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm, Length - 28 1/4" - 718mm, Pull Back - 3 3/4" - 95mm, Inner Rise - 3 3/8" - 86mm, End Rise - 4 1/2" - 114mm, Center Width - 5 1/4" - 133mm, Base Width - 7 1/2" - 190mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8" - 203mm, Drilled - YES Replaces OEM # 53100-390-620 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB400F 1975-76
Stock Type Handlebar for the CB400F (1975-76) - Chrome. The holes are pre-cut for routing the wiring from the switches to the harness. There are also holes drilled to fit the pins in the stock switches to keep them from rotating. Bar Diameter - 7/8" - 22mm Length - 27 1/4" - 692mm Pull Back - 3 1/2" - 89mm Inner Rise - 2 1/4" - 57mm End Rise - 3 1/4" - 82mm Center Width - 5 1/4" - 133mm Base Width - 7" - 178mm Knurl Width - 4 1/2" - 114mm Control Length - 8 1/2" - 216mm Drilled - YES Replaces OEM # 53100-377-000 Note: These Are Drilled For Wires
Handlebar - Stock Type ~ CB750K 1977-78
Stock Type Handlebar for the CB750K (1977-78) - Chrome. Bars are not drilled for wires. Bar Diameter - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 7" - 178mm, End Rise - 9" - 228mm, Center Width - 6" - 152mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 8 1/2" - 216mm, Drilled - YES Replaces OEM # 53100-405-010
Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 6 1/2" - 165mm, End Rise - 8" - 203mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 95011-14100 / 95011-14200
Stock Type Grip Set
Stock Type Grip Set, Replaces OEM#53165-430-000 / 53166-430-030 / 53165-GFW-305 / 53166-GFW-305 / 53165-KS3-900 / 53166-KS3-900 Length 114mm Some of these bikes had 2 styles of grips, both will work but ensure this is the style you would like before you purchase
Honda OEM Type Grips ~ Open End
Honda OEM Type Rubber Grips - Black - Open End Type with End Plugs Included - For 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-KT0-840 for 7/8" handlebars
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-404-671 Note: This handlebar switch assembly requires the wires to be run inside the handlebar
Throttle Sleeeve
Throttle Sleeve
Throttle Sleeve
Throttle Sleeve
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-429-770 / 53171-376-000 No Mirror mount or brake switch mounting hole Fits to 7/8" handlebars
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-429-770 / 53172-376-000 Fits: 7/8" Handlebars - No Mirror Mount
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Polished. Replaces OEM # 35300-107-671 Note: Wiring to be run Inside the handlebar.
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-374-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-341-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35130-404-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35130-461-770 / 35130-463-670 / 35130-461-770
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-323-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-300-672 Note: Wiring to be run Inside the handlebar. This is a single throttle cable configuration type assembly.
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35250-300-033
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35250-341-672
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-460-671 / 35200-425-672 / 35200-445-671
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-410-671
Bar Switch Assembly ~ Left (Clutch) Side
European Version (8 Wire) Bar Switch Assembly ~ Left (Clutch) Side - Black. Please be sure to double check your harness requires this 8 wire type switch Before ordering. Replaces OEM # 35200-377-671 Note: Wiring to be run Inside the handlebar.
Bar Switch Assembly - Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side. Replaces OEM # 35300-319-670
Throttle Cable "A" - Pull
Throttle Cable "A" - Pull Type Replaces OEM# 17910-371-000 / 17910-371-000
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.