Honda ► CA160 ►
-
Here’s our hand-picked list of parts and accessories for your Honda CA160 with universal parts included that match “honda sl125”►
- Honda
![Honda CA160 Denso Ignition Contact Points](/images/parts/100/14-0004.jpg)
Denso Ignition Contact Points
Contact Points (1pc.) - Replaces OEM # 30202-107-004 / 30202-216-004 / 30202-107-154 These points are for Nippondenso ignitions Only. They are NOT for Hitachi or Kokusan Ignitions. Please check which type you have before ordering. Honda used different ignition systems on some of the same years of bikes.
![Honda CA160 Gas Tank Cap](/images/parts/100/07-4647.jpg)
Gas Tank Cap
Chrome Cap Gas Tank Cap with Gasket Installed, Replaces OEM# 17620-402-000 , 17620-402-010
![Honda CA160 Clutch Lever ~ GP Style](/images/parts/100/08-0080.jpg)
Clutch Lever ~ GP Style
Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700
![Honda CA160 Custom Performance Magnetic Oil Drain Plug ~ Joker Machine](/images/parts/100/73-1074.jpg)
Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.
![Honda CA160 Exhaust Gasket Pk/10](/images/parts/100/17-3816.jpg)
Exhaust Gasket Pk/10
Exhaust Gasket Pk/10 OEM Ref # 18291-216-000 / 18291-MN5-650
![Honda CA160 Clutch Center Nut Removal Tool ~ Premium](/images/parts/100/35-0076.jpg)
Clutch Center Nut Removal Tool ~ Premium
Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.
![Honda CA160 Grease Fitting Nipple (Pk/2)](/images/parts/100/73-0941.jpg)
Grease Fitting Nipple (Pk/2)
Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001
![Honda CA160 Clutch Center Nut Removal Tool](/images/parts/100/35-0051.jpg)
Clutch Center Nut Removal Tool
Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.
![Honda CA160 Steel Clutch Plate](/images/parts/100/39-1242.jpg)
Steel Clutch Plate
Steel Clutch Plate A OEM Ref # 23311-200-000 Order the Quantity you require
![Honda CA160 Handlebar Clutch Lever Pivot Bolt & Nut Set](/images/parts/100/73-0996.jpg)
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
![Honda CA160 Carb Float & Pin](/images/parts/100/73-0870.jpg)
Carb Float & Pin
Carb Float & Pin, Replaces OEM # 16013-116-700 Sold Each, Order the Quantity you Require
![Honda CA160 Passenger Rear Footrest Rubber Set](/images/parts/100/73-0185.jpg)
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 95011-31000
![Honda CA160 Exhaust Gasket (Each)](/images/parts/100/17-2816.jpg)
Exhaust Gasket (Each)
Exhaust Gasket - 1 Pc OEM Ref # 18291-216-000 / 18291-MN5-650 Sold Each, Order the Quantity you Require
![Honda CA160 Contact Point ~ Left Side](/images/parts/100/14-0008.jpg)
Contact Point ~ Left Side
Contact Point ~ Left Side - Replaces OEM# 30204-292-003 / 30204-292-154
![Honda CA160 Honda Handlebar Pad](/images/parts/100/13-0013.jpg)
Honda Handlebar Pad
Honda Handlebar Pad Protect your chest and spruce up the look of your bike with a brand new handlebar pad. These will fit to 1/8" and 7/8" bars.
![Honda CA160 Honda Tin Sign](/images/parts/100/61-0031.jpg)
Honda Tin Sign
Honda Tin Sign Spruce up your garage or man cave with this 12" by 12" Tin Sign. Includes holes in the corners for easy hanging.
![Honda CA160 Honda Logo Flag](/images/parts/100/61-1134.jpg)
Honda Logo Flag
Honda Logo Flag - Features the classic Honda logo, measures 36" by 23" and includes metal stud holes in each corner for easy mounting. Will look great in any garage or shop!
![Honda CA160 Honda Beanie Hat / Toque](/images/parts/100/19-0117.jpg)
Honda Beanie Hat / Toque
Honda Beanie Hat / Toque. This black beanie features the classic Honda Logo on both sides. This hat is one size fits all but does fit quite large.
![Honda CA160 Honda Garage - Tin Sign](/images/parts/100/61-0023.jpg)
Honda Garage - Tin Sign
Honda Garage with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.