Honda ► CB350F ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB350F that match “honda sl125”►
- Honda
Front Brake Pipe
Front Brake Pipe - Replaces OEM# 45128-317-701 Aprox 8" Total Length.
Master Cylinder Rubber Boot
Master Cylinder Rubber Boot. This Boot Attaches to where the Brake Hose Joins to the Master Cylinder. Replaces OEM # 45522-300-010
Float Needle & Seat
Float Needle & Seat High Quality - Made In Japan OEM Ref # 16011-329-004
Starter Relay Solenoid Cable
Starter Relay Solenoid Cable, Replaces OEM # 35858-392-000 / 35858-333-000 / 35858-393-000
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish
Ignition Switch Assembly
Ignition Switch Assembly Square End Plug Type - 4 Prong OEM Ref # 35100-341-700 / 35100-374-007 / 35100-369-740 Note: We offer an ignition switch nut tool to easily loosen or tighten the ignition switch nut without causing damage to the switch.
Rear Brake Shoes
Rear Brake Shoes Pk/2 Diameter: 159mm Width: 30mm OEM Ref # 43120-KG4-006
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Engine Oil Seal Kit
Engine Oil Seal Kit Kit Contains: Crankshaft Seal 1, Crankshaft Seal 2, Tachometer Seal, Right Crankcase Cover (Clutch) Seal (CB400F), Countershaft Seal, Right Crankcase Cover Seal, Gear Shift Seal, Main Shaft Seal and Clutch Lever Seal.
Dynatek Dyna S Ignition System (Ultimate Kit)
Dynatek Dyna S Ignition System (Ultimate Kit) with Dynatek Brand 5 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
High Performance Kibblewhite Valve Spring Set
High Performance Kibblewhite Valve Spring Set of 8. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. The springs in these kits are wound from super clean chrome silicon wire that has been heat treated and shot peened. These components offer optimal fitment, keeping lateral movement to a minimum. They work together as a system, providing long life, and maximum performance.
Oil Filter Spring
Oil Filter Spring, Replaces OEM # 15415-300-000
Stock Type Air Filter
Stock Type Air Filter - OEM Ref # 17210-333-610
Brake Caliper Bleed Screw Rubber Cap (Stock Type)
Stock Type Brake Caliper Bleed Screw Rubber Cap. These are the Same Design Rubber Caps as the Originals from the Factory. Replaces OEM # 45110-300-003 / 45224-579-013
Carb Holder Set
Carb Holder Set (Set of 4) with O-Rings to Seal the Manifolds to the Cylinder Block - Replaces OEM# 16212-333-030 X2 and 16213-333-030 X2
Side Cover Emblem
Side Cover Emblem with Attachment Clips, Replaces OEM# 87128-333-000 Sold Each, Order the Quantity you Require
Tachometer Cable
Tachometer Cable - OEM Ref # 37260-333-000 Made in Japan
Fork Tube Set
Fork Tube Set/2, Length (555mm or 21.85"), 33mm OD. Replaces OEM# 51410-317-700 Before ordering Please Confirm 21.85" is the Length you would like
Engine Cover Hardware Set
Engine Cover 34 Piece Hardware Set, Includes the Bolts/Screws for the Engine Case Side Covers, Alternator Cover, Points Cover and Tach Cover.
Exhaust Gasket (Each)
Exhaust Gasket - 1 Pc OEM Ref # 18291-028-000 / 18291-028-306 Sold Each, Order the Quantity you Require
Exhaust Headpipe Gaskets - (Pk/10)
Exhaust Port Gaskets (Pk./10) - OEM Ref. # 18291-028-000 / 18291-028-306
Center Stand Spring
Center Stand Spring. Replaces OEM # 95014-71702
Front Brake Master Cylinder Repair Kit
Front Brake Master Cylinder Repair Kit OEM Ref # 45530-377-305