Honda ► CB500K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB500K that match “screws nuts bolts tools”►
- Honda
![Honda CB500K Ignition Switch Nut Tool](/images/parts/100/35-9119.jpg)
Ignition Switch Nut Tool
Ignition Switch Nut Tool, used to loosen and tighten the igntion switch nut properly without causing any damage to the switch.
![Honda CB500K Tappet Adjuster Screw & Nut Set](/images/parts/100/49-0784.jpg)
Tappet Adjuster Screw & Nut Set
Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires
![Honda CB500K Side Stand Pivot Bolt & Nut Set](/images/parts/100/73-0893.jpg)
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
![Honda CB500K Handlebar Brake Lever Pivot Bolt & Nut Set](/images/parts/100/73-1029.jpg)
Handlebar Brake Lever Pivot Bolt & Nut Set
Brake Lever Pivot Bolt & Nut. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-300-000
![Honda CB500K Engine Cover Bolt Set](/images/parts/100/28-6942.jpg)
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 57 Bolts, 11 Washers and 2 Allen keys for a total of 70 pieces. These bolts are all smooth head Allen bolts and are for the cylinder head cover, the left and right engine covers - points, clutch, alternator, sprocket and starter motor covers. The washers go under 8 of the cylinder head cover screws with washers from the factory, and one of the alternator cover screws, and the two starter motor cover screws.
![Honda CB500K Turn Signal Pinch Bolt Set](/images/parts/100/73-0840.jpg)
Turn Signal Pinch Bolt Set
Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange. This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.
![Honda CB500K Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine](/images/parts/100/73-1059.jpg)
Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine
Joker Machine Brand ~ Black Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM # 90119-283-000 Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.
![Honda CB500K Front Brake Caliper Adjuster Set](/images/parts/100/29-7016.jpg)
Front Brake Caliper Adjuster Set
Front Brake Caliper Adjuster Set. Includes Adjusting Bolt, Spring, Washer and Nut.
![Honda CB500K Carb Float Setting Tool](/images/parts/100/73-0888.jpg)
Carb Float Setting Tool
Carb Float Setting Tool. Use this tool to help set your floats with ease! This pre-set float setting gauge is for the models/years below only. Fits: Honda CB500K (1971-73), CB550K (1974-76), CB550F (1975-77) Supersport
![Honda CB500K Ignition Switch Assembly](/images/parts/100/12-0061.jpg)
Ignition Switch Assembly
Ignition Switch Assembly Square End Plug Type - 4 Prong OEM Ref # 35100-341-700 / 35100-374-007 / 35100-369-740 Note: We offer an ignition switch nut tool to easily loosen or tighten the ignition switch nut without causing damage to the switch.
![Honda CB500K Lens Screw](/images/parts/100/49-0144.jpg)
Lens Screw
Tail Light Lens Screws, Pack of 10. Replaces OEM # 93500-04050-4J ISO Std. Pitch - Steel Plated Size: 4 x 50mm
![Honda CB500K Brake Rod Adjusting Nut](/images/parts/100/73-0845.jpg)
Brake Rod Adjusting Nut
Brake Rod Adjusting Nut, Replaces OEM # 95015-42000
![Honda CB500K Drive Chain Adjuster Set](/images/parts/100/73-0000.jpg)
Drive Chain Adjuster Set
Complete Drive Chain Adjuster Set, Includes 2 Chain Adjusters, 2 Chain Adjusting Bolts and 2 Adjuster Nuts. Replaces OEM # 95014-19000
![Honda CB500K Carburetor Screw Kit](/images/parts/100/49-0773.jpg)
Carburetor Screw Kit
Carburetor Screw Kit. Get a new set of screws to clean up the look of your carbs!
![Honda CB500K Front Wheel Bearing Retainer Ring Tool](/images/parts/100/73-0186.jpg)
Front Wheel Bearing Retainer Ring Tool
Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.
![Honda CB500K Black Steering Stem Nut ~ Joker Machine](/images/parts/100/12-0073.jpg)
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
![Honda CB500K Side Cover Emblem Attachment Nut](/images/parts/100/49-0258.jpg)
Side Cover Emblem Attachment Nut
Side Cover Emblem Attachment Nut, Replaces OEM# 90315-504-000 Sold Each, Order the Quantity you Require
![Honda CB500K Throttle Adjusting Bolt](/images/parts/100/73-0846.jpg)
Throttle Adjusting Bolt
Throttle Adjusting Bolt, Replaces OEM # 53190-300-000
![Honda CB500K Float Bowl Drain Screw](/images/parts/100/48-5041.jpg)
Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require
![Honda CB500K Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine](/images/parts/100/73-1157.jpg)
Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine
Joker Machine Brand ~ Custom Black Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch, Return Spring and Alloy Screw attachment with nut. A fully CNC machined, billet aluminum alternative to the discontinued cast thumb latches. Install is easily made with the provided alloy screw attachment with nut. Much more durable and stronger than the original die-cast piece. High quality CNC machined part made in the U.S.A. Ties in great with our Custom Black Gas/Fuel Tank Cap (#73-1156)
![Honda CB500K Chrome Spin On Oil Filter](/images/parts/100/15-1006.jpg)
Chrome Spin On Oil Filter
Chrome Spin On Oil Filter Replaces Stock OEM Housing, Filter Bolt and Paper Element Filter. Note: When installing screw in the threaded bung first and then install the filter onto the bung.
![Honda CB500K Tongued Front Disk Rotor Washer & Nut Set](/images/parts/100/73-1038.jpg)
Tongued Front Disk Rotor Washer & Nut Set
Front Disk Rotor A8 Tongued Washer & Nut Set. This Set Includes 3 Washers and 6 Nuts. Replaces OEM # 94108-18000 (Tongued Washers) and OEM # 94001-08000-0S (Nuts). These Washers are used for Locking the Nuts that Hold the Front Disc to the Hub.
![Honda CB500K Headlight Adjusting Screw & Spring Set](/images/parts/100/29-7011.jpg)
Headlight Adjusting Screw & Spring Set
Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)