Honda ► CB550F ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB550F with universal parts included►
- Honda
Rear Fuel Tank Holder Rubber
Rear Fuel Tank Holder Rubber, Replaces OEM# 17613-286-000
Round Pod Air Filter ~ Black/Red
39mm Round Pod Air Filter ~ Black Body with Red Foam Filter - Circular style with Black end cap. Provides for greater air flow, especially when using an aftermarket exhaust and has improved flow characteristics compared to the plain wire type mesh Pod filters. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration.
Foam Round Pod Air Filter
39mm Round Foam Pod Air Filter With Chrome End Caps and Rubber Mouth - Circular style.
Stock Style Air Filter
Stock Type Air Filter - Replaces OEM # 17210-390-003
Gas Cap Rubber Seal
Gas Cap Rubber Seal, Replaces OEM # 17631-329-003
Fuel Petcock
Fuel Petcock, Replaces OEM# 16950-374-671
Carb Fuel Line O-Ring Kit
Carb Fuel Line O-Ring 12Pc Kit Includes: 8 Carb Fuel Connector Tube O-Rings and 4 Float Bowl Drain Seal Connector Tube O-Rings (The 4 tubes that connect the 4 carbs together).
Gas/Fuel Tank Cap
OEM Style Gas/Fuel Tank Cap with Rubber Gasket Already Installed, Replaces OEM # 17620-399-010 Note: Does not include a chain attached to this cap.
CB550F 1977 Gas Tank Decal Set
Honda CB550F (1977) Supersport Gas Tank Decals (Stickers) for Candy Sword Blue and Candy Presto Red models. Note: Stripes are 2 pieces and must be carefully joined. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Velocity Stack Set
Velocity Stack Set. These Velocity Stacks are a High Quality, 39mm ID, Taper Tipped Build. Set Comes Complete with 4 Velocity Stacks with Debris Screens, Set Screws and Set Screw Allen Wrench. These install easily and look amazing once installed!
Fuel Hose Quick Disconnect - 1/4" 6mm Fuel Line
Fuel Hose Quick Disconnect - For 1/4" or 6mm fuel line. Fuel line cut off for a quick and easy way to cut off fuel supply while working on your bike.
Fuel Hose Quick Disconnect - 5/16" Fuel Line
Fuel Hose Quick Disconnect - For 5/16" fuel line. Fuel line cut off for a quick and easy way to cut off fuel supply while working on your bike.
Black Cap Air Filter
Black Cap Air Filter (52mm), With Red Filter Element Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (57mm) Oval Type *For Sizing measure the inlet of your carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (62mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (39mm) Circular Type, With Clamp *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (42mm) Circular Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (42mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (49mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (54mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (52mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (54mm) Round Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter (37mm)
Chrome Cap Air Filter (37mm) Circular Type, With Clamp *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Chrome Cap Air Filter
Chrome Cap Air Filter (65mm) Oval Type *For sizing measure the outside diameter of the inlet of the carb* Filter is supplied dry but washable filtration material may be oiled for improved dust filtration
Gear Clamp 40-60mm.
Universal Gear Clamp for Carb Holders or Air Boxes. 9mm Wide. Adjusts with a screwdriver. Fits: Diameters 40-60mm (With a width of 9mm)
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 53-56mm. (1.92" - 2.16")
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 60mm-65mm or 2.36" to 2.56"
Die Cast mount Crankcase Breather
Chrome Breather Filter with Die cast Mount Bracket and Filter Cap.
Breather Filter with rubber end
Breather Filter with rubber end.
Chrome Breather Filter
Breather Filter with Chrome Steel Ends.
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 41-44mm. (1.53" - 1.69")
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 46-49mm. (1.77" - 1.92")
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 66-69mm. (2.48" - 2.63")
Universal Band Clamp
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 69-72mm. (2.67" - 2.87")
Band Clamp 45-47mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 45-47mm.
Band Clamp 50-52mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 50-52mm.
Band Clamp 58-60mm.
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 58-60mm.
Band Clamp 43-49mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 43-49mm. (1.69"-1.93") Diameters
Band Clamp 67mm-73mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 67-73mm. (2.64"-2.87") Diameters
Band Clamp 73mm-79mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 73-79mm. (2.87"-3.11") Diameters
Band Clamp 79-85mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 79-85mm. (3.11"-3.35") Diameters
Band Clamp 85-91mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 85-91mm. (3.35"-3.58") Diameters
Band Clamp 91-97mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 91-97mm (3.58"-3.82") Diameters
Band Clamp 97mm-103mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 97-103mm (3.82"-4.00") Diameters
Band Clamp 103mm-109mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 103-109mm (4.00"-4.29") Diameters
Band Clamp 109mm-115mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 109-115mm (4.29"-4.53") Diameters
Band Clamp 115mm-121mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 115-121mm. (4.53"-4.76") Diameters
Band Clamp 121mm-127mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 121-127mm. (4.76"-5.00") Diameters
Band Clamp 37-43mm
Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 37-43mm. (1.45"-1.69") Diameters
Band Clamp 78-80mm
Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 78-80mm.