Honda ► CB550K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB550K with universal parts included that match “honda sl125”►
- Honda
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
Contact Point
Contact Point - Right Side OEM Ref # 30203-300-005 / 30203-300-154
Contact Point
Contact Point - Left Side OEM Ref # 30204-300-005 / 30204-300-154
Athena Engine Gasket Set
Complete Engine Gasket Set Includes all Engine Gaskets High Quality - Made In Italy by Athena Athena Product #P400210850529
Condenser
Condenser OEM Ref # 30250-300-154 / 30250-300-005
Throttle Cable - Push
Throttle Cable "Push Type" - OEM Ref. # 17920-393-000 / 17920-393-010 Made in Japan
Rear Turn Signal Mount & Collar Set
Rear Turn Signal Mount, Collar and Rubber Set. Includes both Left and Right Sides. These are needed when installing the Rear signals. Replaces OEM # 33605-323-670 (Left Side) & 33606-074-010 (Right Side).
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
Swing Arm Felt (Set/2)
Swing Arm Felt (Set/2), Replaces OEM # 52145-283-000
Electronic Ignition System
Electronic Ignition System. Direct plug-in fitment. Increase RPM 100% tested before shipment, high reliability and high performance! This ignition can be used with your stock coils or any other coils 3 ohms or higher.
Starter Motor Seal
Starter Motor Seal - 60 x 1.4 - Replaces OEM# 31206-286-158 / 31206-402-008
Rear Brake Shoe Spring Set/2
Rear Brake Shoe Spring Set of 2. Replaces OEM # 43151-346-000
Matte Black ~ OEM Type Gas/Fuel Tank Cap With Latch Assembly
Matte Black OEM Type Gas/Fuel Tank Cap with Gasket, Hinge Pin (with E-Clip which Allows for easy installation) and Gas/Fuel Tank Cap Latch Assembly, Includes Latch, Return Spring, Latch Mounting Pin and C-Clip. Replaces OEM # 17510-323-310
Brake Lever
Brake Lever OEM Ref # 53175-369-003 / 53175-300-020 / 53170-333-000
Brake Lever ~ GP Style
Brake Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53175-369-003
Starter Clutch Diode
Starter Clutch Diode OEM Ref # 31700-124-003 / 31700-166-008
Front Brake Pads
Front Brake Pads Pk/2 OEM Ref # 45105-390-006A
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-17001 Band Overall Size: 6.125" (155mm) Measuring from the inside of the brackets.
Ignition Switch Repair Kit
Ignition Switch Repair Kit
Custom Type Black Fork Caps (Set/2) ~ Joker Machine
Joker Machine Brand ~ Custom Black Fork Cap Set of 2 with O-Rings. Replaces OEM # 90123-300-000 High quality CNC machined from billet aluminum, much lighter then the stock type. Gives your bike a great custom look. Made in the U.S.A.
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Oil Filter Washer - Each
Oil Filter Washer - Each 30mm OD - 20.5mm ID - .5mm Thickness Replaces OEM# 15414-300-000 Sold Each, Order the Quantity you Require
Headlight Case Collar
Headlight Case Collar, Replaces OEM# 61302-300-000 This is the collar that goes in each side of the stock headlight case. Sold Each, order the quantity you require
Crank Seal
Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.
Front Brake Master Cylinder Rebuild Kit
Front Brake Master Cylinder Rebuild Kit - OEM Ref # 45530-404-315 Made in Japan
Tail Light Mounting Hardware Set
Tail Light Mounting Hardware Set. This Set is Used to Mount the Tail Light Bracket. This 12pc Set Includes 4pc Tail Light Setting Bolts, 4pc Tail Light Setting Washer and 4pc Rubber Fender Cushion.
Fuel Petcock Screw and Washer Set
Set of 2 Chrome Plated Fuel Petcock Screws with 2 Fibre Washers. These Screws replace OEM # 93500-06028-0A These screws fasten the fiber washers to the inside of the petcock and attach to the Fuel Tank. It is always a good idea to replace these when installing a New Fuel Petcock on your CB750K (1969-74), CB550K (1974) or CB500K (1971-73). Purchase these with our Petcock #20-8039
Starter Motor Terminal Rubber Boot
Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000
Velocity Stack Set
Velocity Stack Set. These Velocity Stacks are a High Quality, 39mm ID, Taper Tipped Build. Set Comes Complete with 4 Velocity Stacks with Debris Screens, Set Screws and Set Screw Allen Wrench. These install easily and look amazing once installed!
Fork Seals
Fork Seals Set/2 35 X 48 X 10.5/11
Primary Chain
OEM Quality Primary Chain, 50 Link. Replaces OEM # 92057-1011 / 23131-426-003 / 23131-323-003
Drain Plug Crush Washer
Drain Plug Crush Washer 12mm x 18mm x 1mm
Oil Drain Plug
Magnetic Oil Drain Plug 12mm Diameter 1.50 Thread Pitch OEM Ref # 92800-12000 / 92066-1174 / 01107-12208
Float Needle
Float Needle High Quality - Made In Japan OEM Ref # 16155-382-004 / 16011-393-004 / 16011-KG0-891 / 16030-1007 / 16030-028 / 16011-382-004
Float Bowl Gasket
Float Bowl Gasket OEM Ref # 16019-024, 16010-323-315, 16010-323-004
Progressive Type Front Fork Springs
Progressive Type Front Fork Spring Set/2. Includes 10" Pipe and Washers. These Progressive Type Springs improve handling and overall ride quality. They Stop front end droop and diving during braking while improving cornering stability. A Great Performance upgrade for your Bike! Some Bikes Require that the Spacer Length be Calculated using the instructions below then the Included Pipe Cut to make the Appropriate Sized Spacers, Some Models Do Not Require Spacers. Be Sure to Check the End of the Installation Instructions Below to see if your Bike Require Spacers.
Oil Filter
Oil Filter OEM Ref # 15410-426-010 / 15410-422-004 / 16099-003 / 36Y-13441-00 Note: If you require new oil filter o-rings, springs or washers we sell these on our site as well
Honda Handlebar Pad
Honda Handlebar Pad Protect your chest and spruce up the look of your bike with a brand new handlebar pad. These will fit to 1/8" and 7/8" bars.
Honda Tin Sign
Honda Tin Sign Spruce up your garage or man cave with this 12" by 12" Tin Sign. Includes holes in the corners for easy hanging.
Honda Logo Flag
Honda Logo Flag - Features the classic Honda logo, measures 36" by 23" and includes metal stud holes in each corner for easy mounting. Will look great in any garage or shop!
Honda Logo Keychain
Honda Logo with Red Emblem - Rubber Keychain 5.5" Total Length
Honda Beanie Hat / Toque
Honda Beanie Hat / Toque. This black beanie features the classic Honda Logo on both sides. This hat is one size fits all but does fit quite large.
Honda Garage - Tin Sign
Honda Garage with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.
Red Honda Logo Hat
Red Honda Logo Hat Velcro Adjustable Back
Blue Honda Racing Hat
Blue Honda Racing Hat Velcro Adjustable Back
Leather Honda Logo Keychain
High Quality Leather Honda Logo Keychain with Second Logo at the Base.
Honda Logo Rubber Keychain
Honda Logo Rubber Keychain
Honda Riding Bandana / Scarf
Honda (The Power of Dreams) Riding Bandana / Scarf. This lightweight breathable bandana is perfect for riding on your bike and keeping debris away from your mouth and face.
White Honda Logo Hat
White Honda Logo Hat Velcro Adjustable Back
Honda 93 Red Hat
Honda 93 Red Hat - High Quality Hat With Beautiful Stitched Logos.
Honda Gray Trucker Hat
Honda Gray Trucker Hat With Quality Sewn on Patch Snap On Adjustable Back
Honda Wing Floor Mat
Honda Wing Floor Mat. This mat makes a great addition to any garage/shop or mancave! Measures 15.75" x 24"
Honda Logo (White Logo) - Tin Sign
Honda Logo (White Logo) with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.
Honda Logo (Red Background) - Tin Sign
Honda Logo (Red Background) with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.
Honda Logo (Black Background) - Tin Sign
Honda Logo (Black Background) with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.
Honda Logo Keychain with Fibre Background
Honda Logo Keychain with Carbon Fibre Looking Background
Honda Logo Keychain with Carbon Background
Honda Logo Keychain with Carbon Pattern Background
Honda Logo Fox Trucker Hat
Honda Logo with Fox Emblem Trucker Hat. High Quality Hat With Beautiful Stitched Honda Logo. Snap On Adjustable Back
Honda Logo HRC Trucker Hat
Honda Logo with HRC Emblem Trucker Hat. High Quality Hat With Beautiful Stitched Honda Logo. Snap On Adjustable Back
Black / Red - Honda Logo HRC Hat
Black / Red - Honda Logo with HRC Emblem Hat. High Quality Hat With Beautiful Stitched Honda Logo. Snap On Adjustable Back
Black - With White Honda Logo Hat
Black - With White Honda Logo Hat Adjustable Velcro Back
Honda Gray New Era Hat
Honda Gray New Era Hat - Quality "New Era" hat, features all stitched Honda logo. Snap On Adjustable Back
Custom Honda Chrome Crash Bar Highway Footpeg Set
Custom Honda Chrome Crash Bar Highway Footpeg Set/2. 1" & 1 1/4" Clamp.
Honda Logo (Blue/Yellow/Red Logo) - Tin Sign
Honda Logo (Blue/Yellow/Red Logo) with weathered looking edges - Tin Sign Spruce up your garage or man cave with this 12" by 8" Tin Sign. Includes holes in the corners for easy hanging.
Large ~ Honda CB750 Four Floor Mat ~ Black
Honda CB750 Four Large Floor Mat ~ Black. This mat makes a great addition to any garage/shop or mancave! Measures 19" x 31".
Honda CB750 Four Floor Mat ~ Black
Honda CB750 Four Floor Mat ~ Black. This mat makes a great addition to any garage/shop or mancave! Measures 15.75" x 24"
Honda CB750 Four Floor Mat ~ Red
Honda CB750 Four Floor Mat ~ Red. This mat makes a great addition to any garage/shop or mancave! Measures 15.75" x 24"
Handlebar End Plugs
Aluminum End Plugs Honda CBR
Handlebar End Plugs
Aluminum End Plugs Honda / Suzuki / Kawasaki
Valve Shim Tool
Valve Shim Tool Honda CBX, CB750/900
Tire Valve Caps Pk/2
Honda Logo Aluminum Tire Valve Caps Pk/2
Mini Tachometer
Mini Tachometer 4:1 Ratio 0-12,000RPM Suitable For Suzuki & Honda 750-1000cc Mechanical Driven
Mini Tachometer
Mini Tachometer 7:1 Ratio Black Face LED Lighting Suitable For Some Honda's Mechanical Driven
Banjo Bolt
Banjo Bolt M10 x 1.25 x 21mm Fits: Most Honda, Yamaha & Kawasaki masters with single brake hose.
Oil Filter Wrench
Oil Filter Wrench Wafer-Thin For GL1500 Goldwings Also Works On Many other Honda/Yamaha/Kawasaki Models
Mini Tachometer ~ White Face Plate
Mini Tachometer White Face Plate Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Suzuki, Honda 750-1000cc
Mini Tachometer
Mini Tachometer Dial Scale: 0-12,000RPM 7:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Some Honda's
Mini Tachometer
Mini Tachometer Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 1.9" (48mm) Diameter LED Illumination Suitable For Suzuki & Honda 750-1000cc
Mini Tachometer ~ Black Face Plate
Mini Tachometer - Black Face Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 1.9" (48mm) Diameter LED Illumination Suitable For Suzuki & Honda 750-1000cc
Mini Tachometer ~ Black Face Plate
Mini Tachometer Black Face Plate 4:1 Ratio 0-12,000RPM LED Lighting Suitable For Honda 750-1000cc Mechanical Driven
Vintage Style Tachometer
Vintage Style Tachometer Dial Scale: 0-10,000RPM 4:1 Ratio Mechanical Drive 80mm Diameter LED Illumination Suitable For Honda or Suzuki
Mini Tachometer ~ All Black
Mini Tachometer Black Body, Black Face Plate Dial Scale: 0-12,000RPM 7:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Some Honda's
Mud Flap
Honda Mud Flap Black Rubber height 6 1/2 " width across at mount holes 4 3/4" width across bottom of flap 5 5/8" center to center on 2 outer slots is 3 3/8"
Hydraulic Brake Light Switch
Hydraulic Brake Light Switch Banjo Bolt Type - 10mm x M1.25 Can Be Used Front/Rear At Single Banjo Brake Line Fitting Correct Thread For Most Honda/Kawasaki/Yamaha Stock Fittings
Flywheel Puller
Flywheel Puller 22mm x 1.5 Right Hand Thread Internal Thread Flywheels & Rotors Honda - XL250, XL350, XL600, XR600R, XR250, XR350, XR500
Tappet Adjusting Tool Set
Tappet Adjusting Tool Set 4 Piece Set For both 9mm & 10mm valve adjuster screw locknuts. Screwdriver tip & 4mm square tip for valve adjuster screws. For Honda/Yamaha/Suzuki
Mini Tachometer ~ All Black
Mini Tachometer Black Face Plate, Black Body Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 2.25" (60mm) Diameter Bulb Type Illumination Suitable For Suzuki, Honda 750-1000cc
Flywheel Puller
Flywheel Puller 27mm x 1.0 Left Hand Thread Internal Thread Flywheels & Rotors Honda - CR80R, CR125R, CR250R, CR450R, CR500R. Many Kaw/Suz/Yam
Flywheel Puller
Flywheel Puller 20mm x 1.5 Right Hand Thread Internal Thread Flywheels & Rotors Honda - CB750 Four 69-78 SOHC Models, Suzuki - GSX-R600V, GSX-R750 T/V
Flywheel Puller
Flywheel Puller 18mm x 1.5 Right Hand Thread ( Hollow Center) Internal Thread Flywheels & Rotors Honda - 4 Cyl. Street 4-Valve Per Cylinder Engines CB750K, CB900C, CB1000 78 & Later
Handmade Christmas Stocking
HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Ragsâ€. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.
Short Stem Air Glide Mirror Set
Short Stem Chrome Billet Aluminum Oval Air Glide Mirror Set. left hand thread adapter included for Yamaha right-side perch. These mirrors will fit most Honda, Kawasaki, Suzuki & Yamaha's with a 10mm mounting hole. 10mm thread, Stem 6.1" total length, Mirror 5 1/8" wide, 2 5/8" tall, 5/8" deep.
Long Stem Air Glide Mirror Set
Long Stem Chrome Billet Aluminum Oval Air Glide Mirror Set. left hand thread adapter included for Yamaha right-side perch. These mirrors will fit most Honda, Kawasaki, Suzuki & Yamaha's with a 10mm mounting hole. 10mm thread, Stem 6.9" total length, Mirror 5 1/8" wide, 2 5/8" tall, 5/8" deep.
Push/Pull Style Throttle Assembly
Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.
Universal 1 Ohm Dual Output 6V Ignition Coil
Universal 1 Ohm Dual Output 6V Ignition Coil. Will work on a number of Honda, Kawasaki, Suzuki, Yamaha, Norton, BSA, Triumph and other motorcycles with 6 volt dual output ignition coils. Check the coil mount spacing on your bike before you order. Mounting holes are 90mm (3.5") apart center to center. Low tension wires 390mm (15") long. Female spade connectors at the coil and male and female bullet connectors at the other ends. Spark plug wires (high tension leads) 570mm (24") long with 300mm (12") protective sheath.
Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders
Carburetor and throttle body synchronizer kit for bikes with 2, 3 or 4 Cylinders. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2, 3 or 4 cylinders. Includes 4 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.
Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2 carbs. Includes 2 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.
Brake & Clutch Lever Assemblies ~ Silver
Brake & Clutch Lever Assemblies ~ Silver. Includes both the clutch and brake levers and both perches (brackets). Styled after the Honda Stock type controls. These are universal for 7/8" bars, and are great for custom projects. One piece brackets with 10mm RH Thread mirror mount holes. The lever perch accepts the factory style brake switch. Note: Make sure you have 7/8" handelbars and you are using a cable operated clutch and front brake. This is a universal part and some mods may have to be made to work with your bike.
Brake & Clutch Lever Assemblies ~ Black
Brake & Clutch Lever Assemblies ~ Black. Includes both the clutch and brake levers and both perches (brackets). Styled after the Honda Stock type controls. These are universal for 7/8" bars, and are great for custom projects. One piece brackets with 10mm RH Thread mirror mount holes. The lever perch accepts the factory style brake switch. Note: Make sure you have 7/8" handelbars and you are using a cable operated clutch and front brake. This is a universal part and some mods may have to be made to work with your bike.