Honda ► CB650 ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB650 with universal parts included►
- Honda
![Honda CB650 Brake Rod Adjusting Nut](/images/parts/100/73-0845.jpg)
Brake Rod Adjusting Nut
Brake Rod Adjusting Nut, Replaces OEM # 95015-42000
![Honda CB650 Valve Stem Seal](/images/parts/100/73-0871.jpg)
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
![Honda CB650 Tach Drive Plug Block Off w O-Ring](/images/parts/100/73-0884.jpg)
Tach Drive Plug Block Off w O-Ring
Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.
![Honda CB650 Center Stand Spring Plate](/images/parts/100/73-0891.jpg)
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-425-000
![Honda CB650 Rear Brake Shoe Spring Set/2](/images/parts/100/73-0895.jpg)
Rear Brake Shoe Spring Set/2
Rear Brake Shoe Spring Set of 2. Replaces OEM # 43151-346-000
![Honda CB650 Fuse Box Plate Cover Screw Set](/images/parts/100/73-0897.jpg)
Fuse Box Plate Cover Screw Set
Black Fuse Box Plate Cover Screw (Set of 2). Replaces OEM # 93700-05020-0G
![Honda CB650 Footrest Rubbers](/images/parts/100/73-0912.jpg)
Footrest Rubbers
Footrest Rubbers (Set/2) - OEM Ref # 50661-425-670
![Honda CB650 Wire Harness](/images/parts/100/73-0930.jpg)
Wire Harness
Main Wire Harness Loom - OEM Ref # 32100-460-000 NOTE: These fit model years and type listed, other years and bikes use a different OEM part number (there is a difference!).
![Honda CB650 Brake Cam Dust Seal](/images/parts/100/73-0938.jpg)
Brake Cam Dust Seal
Brake Cam Dust Seal, Replaces OEM # 43134-300-000
![Honda CB650 Crank Seal](/images/parts/100/73-0960.jpg)
Crank Seal
Crank Seal - 30 x 42 x 8 - Replaces OEM # 91201-300-003 Note: Please Reference the OEM Number and Seal size above to make sure this is the Crank Seal you Require. Some models use 2 Different Crank Seals.
![Honda CB650 Tach Drive Oil Seal](/images/parts/100/73-0964.jpg)
Tach Drive Oil Seal
Tach Drive Oil Seal - 4.8 x 14.5 x 5 - Replaces OEM # 91256-425-003
![Honda CB650 Shift Shaft Oil Seal](/images/parts/100/73-0968.jpg)
Shift Shaft Oil Seal
Shift Shaft Oil Seal - 12.5 x 25 x 8 - Replaces OEM # 91204-425-003
![Honda CB650 Intake Valve](/images/parts/100/73-0979.jpg)
Intake Valve
Intake Valve - Replaces OEM # 14711-426-003 Made in Japan
![Honda CB650 Exhaust Valve](/images/parts/100/73-0980.jpg)
Exhaust Valve
Exhaust Valve - Replaces OEM # 14721-426-003 Made in Japan
![Honda CB650 Handlebar Clutch Lever Pivot Bolt & Nut Set](/images/parts/100/73-0998.jpg)
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90113-422-000 (Bolt) and OEM # 94002-06000-0S (Nut).
![Honda CB650 Pilot Jet Set ~ Size #35 (Pk/4)](/images/parts/100/73-1004.jpg)
Pilot Jet Set ~ Size #35 (Pk/4)
Pilot Jet Set of 4 (Size #35), Replaces OEM # 99103-GY6-0350 Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible.
![Honda CB650 Piston Ring Set (Standard Size)](/images/parts/100/73-1024.jpg)
Piston Ring Set (Standard Size)
Standard Size Piston Ring Set Ring Set OEM Ref # 13011-426-004 (Std.) Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
![Honda CB650 Handlebar Brake Lever Pivot Bolt & Nut Set](/images/parts/100/73-1031.jpg)
Handlebar Brake Lever Pivot Bolt & Nut Set
Handlebar Brake Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-MA5-671 (Bolt) and OEM # 94050-06000 (Nut)
![Honda CB650 Turn Signal Lamp Lens Screw Set](/images/parts/100/73-1034.jpg)
Turn Signal Lamp Lens Screw Set
Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A ALSO Fits our Signal Lens #11-2195 and Signals #11-2114 and #11-2149
![Honda CB650 Rear Wheel Damper Rubber](/images/parts/100/73-1054.jpg)
Rear Wheel Damper Rubber
Rear Wheel Drive Damper Rubber, Replaces OEM # 41241-300-050 These fit between the rear wheel sprocket hub and the wheel hub and get worn down over time from use. Note: 4 Used Per Bike, Order The Quantity you Require
![Honda CB650 Custom Brake Rod Adjuster Knob ~ Joker Machine](/images/parts/100/73-1072.jpg)
Custom Brake Rod Adjuster Knob ~ Joker Machine
Joker Machine Brand ~ Custom Brake Rod Adjuster Knob, Replaces OEM # 95015-42000 Gives your bike a great custom look while refining the quality of your brake adjuster knob! Makes for super easy brake adjustments due to the choice of a knurled outside knob and a hex nut feature all in one. High quality CNC machined part, made in the U.S.A.
![Honda CB650 Custom Performance Magnetic Oil Drain Plug ~ Joker Machine](/images/parts/100/73-1074.jpg)
Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.
![Honda CB650 Tach Drive Plug Block Off ~ Black ~ Joker Machine](/images/parts/100/73-1075.jpg)
Tach Drive Plug Block Off ~ Black ~ Joker Machine
Joker Machine Brand ~ Black Tach Drive Plug (Block Off). This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. High quality CNC machined part, made in the U.S.A.
![Honda CB650 Front Stock Type Rim](/images/parts/100/73-1077.jpg)
Front Stock Type Rim
Chrome Front Stock Type Rim, 1.85" Width x 19" x 40 Hole, Overall Actual Width 2.75". These are high quality rims made by D.I.D who originally made the OEM rims. Replaces OEM # 44701-405-771