Honda ► CB750A ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750A with universal parts included►
- Honda
Fuel Tank Emblem Screw Set/4
Fuel Tank Emblem Screw Set/4 (Enough for both fuel tank Emblems), Replaces OEM # 93700-04006-0G.
Valve Stem Seal
Valve Stem Seal OEM Ref # 12209-MB9-003
Cylinder Head Nut Cover
Cylinder Head Nut Cover OEM Ref # 91318-300-013
Primary Chain
OEM Quality Primary Chain - 50 Link OEM Ref # 13610-393-004
Intake Valve
Intake Valve OEM Ref # 14711-300-005 / 14711-ME2-000 Made In Japan
Exhaust Valve
Exhaust Valve OEM Ref # 14721-300-005 Made In Japan
Tappet Covers
Finned Tappet Cover - Sold Each Comes With O-Ring gasket High Quality Chrome Finish
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Kickstart Rubber
Kickstart Rubber OEM Ref # 28311-329-000 / 95011-51000 / 28311-342-000
Gear Change Rubber
Gear Change Rubber OEM Ref # 95011-400-000
Chrome Speedometer & Tachometer Cover Set
Set of Chrome Plated Speedometer & Tachometer Covers. These go over the stock speedo and tach gauges to give them a great chrome look! Diameter at Base of Cover - 103mm Diameter at Top of Covers - 87mm Height of Covers - 37mm Includes a small hole in one of the covers for the tripmeter. Note: Speedo/Tach Not Included, Shown in Photo to illustrate how they look when installed.
Sidecover Damper Rubber A
Rubber Sidecover Damper A, Replaces OEM # 17247-303-000
Front Fuel Tank Holder Rubber
Front Fuel Tank Holder Rubber - Replaces OEM # 17611-283-010 Sold Each.
Complete Sidecover Rubber Set
Complete 4pc Sidecover Rubber Set (enough for both sidecovers). This set includes a total of 4 rubbers. Replaces OEM # 17247-303-000 (X4).
Stock Style Speedometer - MPH
Stock Style Speedometer MPH with back illumination, Face dial ranges from 0-120MPH. The ratio of this Speedometer is 60MPH=2240 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Stock Style Tachometer
Stock Style Tachometer, Face dial ranges from 0-12000RPM. The ratio of this Tachometer is 4:1 which is the ratio used on stock CB750's. Note: The CB Tachometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Stock Style Speedometer - KPH
Stock Style Speedometer KPH with back illumination, Face dial ranges from 0-240KPH. The ratio of this Speedometer is 100KPH=2330 RPM which is the ratio used on all stock type CB's. Note: The Speedometers slightly changed from year to year, this may not be an exact stock match for your bike but will work great! Housing Size approx 4.6", face 3.9" Check the photo for the design.
Starter Motor Seal
Starter Motor Seal - Size 24.4 x 3.1, Replaces OEM# 91312-MG7-003 / 91309-300-000 / 91309-425-003
Piston Pin
Piston Pin - OEM Ref. # 13111-300-000 Japanese made Superior Quality
Piston Pin Clips
Piston Pin Clips, 15mm (Pk/2) - Japanese made Superior Quality OEM Ref. # 94601-15000
Piston Ring Set (Standard Size)
Standard Size Piston Ring Set Ring Set OEM Ref. # 13011-392-004 (Std.) Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons
Piston Ring Set - 1st Oversize (0.25mm.)
1st Oversize Piston Ring Set + 0.25mm. Ring Set OEM Ref. # 13021-392-000 / 13021-392-004 Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
Piston Ring Set - 2nd. Oversize (0.50mm)
2nd. Oversize Piston Ring Set + 0.50mm. Ring Set OEM Ref # 13031-392-000 / 13031-392-004 Japanese made Superior Quality Note: This Set includes piston rings to rebuild one piston, 4 Sets are needed to rebuild all pistons.
Cam Roller Pin
Cam Roller Pin - Replaces OEM # 14605-286-020
Cam Shaft Roller Collar
Cam Shaft Roller Collar - Replaces OEM # 14606-286-000
Rubber Cushion for Cam Chain Roller Shaft
Cam Roller Shaft Rubber (Pk/2) - Replaces OEM # 14607-300-000
Cam Chain Guide
Cam Chain Guide - Replaces OEM # 14611-300-000
Cam Chain Guide Pin
Cam Chain Guide Pin OEM Ref # 14612-286-000
Ignition Coil Bracket Set
Ignition Coil Bracket Set. Replaces OEM# 30511-300-000 Features a high grade polished finish and includes coil mounting hardware.
Exhaust Flange Clamps
Stock Type Exhaust Flange Clamp, Replaces OEM# 18231-392-000 Note: Each Bike Requires 4 Exhaust Flange Clamps. Order the Quantity you Require.
Kick Stand Stopper Rubber
Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.
Headlight Case Collar
Headlight Case Collar, Replaces OEM# 61302-300-000 This is the collar that goes in each side of the stock headlight case. Sold Each, order the quantity you require
Headlight Setting Collar
Headlight Setting Collar, Replaces OEM# 61304-292-000 Sold Each, order the quantity you require
Dynatek Dyna S Ignition System (Ultimate Kit)
Dynatek Dyna S Ignition System (Ultimate Kit) with Dynatek Brand 3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
Dynatek Dyna S Ignition System (Premium Kit)
Dynatek Dyna S Ignition System (Premium Kit) with 2X Aftermarket Generic Performance 3.3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
Brake Lever
Brake Lever OEM Ref # 53175-431-670 / 53175-393-771
Front Brake Master Cylinder Rebuild Kit
Front Brake Master Cylinder Rebuild Kit - OEM Ref # 45530-404-315 Made in Japan
Front Master Cylinder Reservoir Diaphragm
Front Master Cylinder Reservoir Diaphragm. Replaces OEM # 45520-300-000
LED Upgraded Headlight Assembly
LED Upgraded Headlight Assembly - Chrome Side Mount Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. H4 LED Bulb with 6000k white brightness and Bulb Dust Boot for North American Market CB750's that drive on the right side of the road. Fits: All Honda CB750's (1969-78)
Headlamp Rim & Retainer
Headlamp Rim & Retainer Assembly - OEM Ref. # 33101-404-671 / 33101-300-673 / 33101-405-671 / 33100-371-980
7" Halogen Lamp Conversion Kit
7†Halogen Lamp unit with 12v 60/55 Bulb (P43T base) and Bulb Dust Boot for North American Market RH side Drive.
Headlamp Rim
Headlamp Rim - Chrome - Replaces OEM # 33101-300-673 / 33101-405-671
7" Halogen Lamp Conversion Kit
7" Halogen Headlamp Conversion unit for Left Hand side of the road driving as in the UK, Japan etc. Lamp unit is Euro E-mark approved and has an internal parking lamp bulb. Lamp unit includes a 12V 60/55 Watt P43T Halogen Bulb with dust boot. 7" Lamp unit fits into stock retainer. Fits: Left hand side of the road Market type bikes (Japan and UK) & for fitting into stock CB750 Retainer (1969-78) models.
Headlight Assembly
Chrome Side Mount Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Halogen Lamp unit with 12v 60/55 Bulb (P43T base) and Bulb Dust Boot for North American Market CB750's that drive on the right side of the road. Fits: All Honda CB750's (1969-78)
Headlight Assembly ~ European Version
Chrome Side Mount European Version Headlight Assembly. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. 60/55 watt H4 P43T Halogen Bulb and parking light. E-Mark certified for European Market use (can also be used in North America). Fits: All Honda CB750's (1969-78)
7" Halogen Lamp Conversion Kit
7" Halogen Lamp with 60/55 watt H4 P43T Halogen Bulb and parking light. E-Mark certified for RH drive European Market use (can also be used in North America). Replaces stock sealed beam and fits into stock retainer. Fits: All Honda CB750's (1969-78)
Starter Solenoid Relay
Starter Solenoid Relay, Replaces OEM# 35850-371-670 / 35850-306/670 / 35850-HA7-670
Turn Signal Lamp Gasket
Turn Signal Lamp Gasket, Replaces OEM # 33406-377-671
Turn Signal Lamp
Turn Signal Lamp - Front 2-Wire OEM Ref # 33400-377-671 / 33400-460-671 / 33400-460-679