Honda ► CB750K ►
-
Here’s our hand-picked list of accessories for your Honda CB750K with universal parts included►
- Honda
CB750K 1977 Gas Tank Stripe Decals
Honda CB750K (1977) Gas Tank Stripe Decals (Stickers). Stripes must be carefully joined at one corner as done by the manufacturer. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
CB750K 1977-78 Side Cover Stripe Decals
Honda CB750K (1977-78) Side Cover Stripe Decals (Stickers). These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Tach Drive Plug Block Off w O-Ring
Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Points Cover Screws
Points Cover Screws (Set of 2). Fits: ALL 1969-1978 Honda CB750 Points Covers and Our Points Cover (Part #13-0000).
Starter Motor Cover Bolt & Washer Set
Starter Motor Cover Bolt & Washer Set. This Set is Used to Fasten the Starter Motor Cover. Includes 2 Bolts and 2 Washers.
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar, Bolt and Washer.
Chrome Kick Starter Shaft Cover ~ Joker Machine
Joker Machine Brand ~ Chrome Kick Starter Shaft Cover. Eliminates the heavy kick starter arm and cleans up the look of the splined shaft. Installs in seconds with a set screw from underneath. High quality CNC machined part, Made in the U.S.A.
Custom Black Finned Points Cover ~ Joker Machine
Joker Machine Brand ~ Custom Black Finned Points Cover with a Built in Rubber O-Ring and Gold Colored Mounting Hardware, Replaces OEM # 30370-300-020 Brilliant "diamond cut" machining on the outside surface, really gives this piece a cool look! High quality CNC machined cover made in the U.S.A.
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Cast Aluminum Finned Starter Motor Cover
Cast Aluminum Finned Starter Motor Cover, Made in the USA. Replaces OEM # 31280-300-000 This is a new cover designed and produced like the ones from the 70's that aren't made anymore. This cover is delivered in as-cast condition. As such, Sandblasting, painting, or powder coating will be required if you want a look other then the cast aluminum look. As delivered it is a close match for an original patina engine. Note: Gasket and Hardware Not Included with Cover
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish. High Quality, Made in the USA.
Pilot Indicator Light Cover
Pilot Indicator Light Cover, Replaces OEM# 37600-377-018 This includes the front and rear cover with fastening screws.
Clutch Release Actuator Assembly
Clutch Release Actuator Assembly, Replaces OEM# 22830-300-000 / 22860-300-006 / 22820-300-000 / 22841-300-000 / 91301-426-010
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-300-006
Handmade Christmas Stocking
HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Ragsâ€. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.
Mud Flap
Honda Mud Flap Black Rubber height 6 1/2 " width across at mount holes 4 3/4" width across bottom of flap 5 5/8" center to center on 2 outer slots is 3 3/8"
Mud Flap
Yamaha Mud Flap Black Rubber height 6 1/2 " width across at mount holes 4 3/4" width across bottom of flap 5 5/8" center to center on 2 outer slots is 3 3/8"
Mud Flap
Mud Flap Black Rubber height 6 1/2 " width across at mount holes 4 3/4" width across bottom of flap 5 5/8" center to center on 2 outer slots is 3 3/8"
Autosol Chrome Polish (R)
(50 gram/ml) tube of Autosol Metal Polish. Cleans, polishes, protects and removes corrosion. For all metal parts-chrome, brass, copper, nickel, stainless steel & aluminum. "A product that is superior to anything else available" - has won awards and several medals on an international level.
Chrome Goldwing Emblem Set/2
Chrome 3D Goldwing Emblem Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Gold Goldwing Emblem Set/2
Gold 3D Goldwing Emblem/Decal Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Brake Free LED Helmet Brake Light Set (As Seen on Shark Tank)
Brake Free is an ultra-bright smart LED brake light for your motorcycle helmet that instantly improves your visibility. No apps or wires needed, just mount it to your helmet and go! Comes with everything you need - universal and XL helmet mounts, micro USB charging cable, quick start guide, and more. This amazing product lights up as soon as it detects a slowdown. Without connecting to the bike it detects engine braking, regular braking, and emergency braking via the combination of accelerometer and gyrometer sensors inside the unit. The 100 super bright LED's on this unit are right at eye level for car and truck drivers so it increases bike safety immensely! Features a long 8+ hour battery life for continuous riding. Buy today for the safest ride out there. The Brake Free fits helmet sizes XS to XXL, matte and gloss finish, full face, 3/4 and half helmets. We fit-tested Brake Free on race helmets, street helmets, touring helmets, adventure helmets, modular helmets, and even some skateboard and bike helmets. A smarter way to be seen!
Fuel Hose Quick Disconnect - 1/4" 6mm Fuel Line
Fuel Hose Quick Disconnect - For 1/4" or 6mm fuel line. Fuel line cut off for a quick and easy way to cut off fuel supply while working on your bike.