Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included that match “honda sl125”►
- Honda
Rear Sprocket Bolt & Nut Set
Rear Sprocket Stud Bolt (12x54) & Nut Set. Set includes 4 Stud Bolts and 4 Nuts. These Stud Bolts Fasten to the Centre Wheel Flange and Rear Sprockets. Replaces OEM # 90128-341-000 X4 (Bolts), 94030-12000 X4 (Nut)
Engine Bolt Set
Engine Bolt Set, 60 Pieces, Includes 13 Different Bolt Types and 2 Allen Keys.
Clutch Cover Screw Set
Clutch Cover Screw Set of 10 Screws. Replaces OEM # 93500-06028-0A X7 and 93500-06035-0A X3.
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Custom Fork Boot Collars ~ Joker Machine
Joker Machine Brand ~ Custom Fully CNC Machined Fork Boot Collar Set/2. A great solution for giving your stock bike (with the sheet metal headlight ears), an open fork tube Cafe look, while giving you an upper attachment point in order to retain your stock accordion style O.E.M. fork Gaitors. Designed to fit easily onto 35MM fork tubes and may be adjusted up-or-down along the tube into position, then tightened into place with the recessed set screw located in the groove (totally invisible).
Neutral Switch Screw
Neutral Switch Screw, This is the small Screw that threads into the Neutral Switch. Replaces OEM # 35752-300-020
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-300-006
Center Stand Spring
Center Stand Spring. Replaces OEM # 95014-71702
Flange Knock Bolt (Set/2)
Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000
Alternator Cover Mounting Screw Set
Alternator Cover Mounting Screw Set. Set of 8 Mounting Screws Used to Fasten the Main Alternator Cover in place (Not the Alternator Face Plate). Replaces OEM # 93500-06032-OA X7 / 93500-06035-OA X1
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish. High Quality, Made in the USA.
Cylinder Stud Packing Set (8pc)
8pc. set of rubber cylinder head bolt (stud) packings (short tubular rubber seals that fit over dowels) OEM Ref. # 12115-300-000
Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine
Joker Machine Brand ~ Black Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM # 90119-283-000 Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.
Clutch Release Actuator Assembly
Clutch Release Actuator Assembly, Replaces OEM# 22830-300-000 / 22860-300-006 / 22820-300-000 / 22841-300-000 / 91301-426-010
Fork Cap O-Ring Set/2
Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.
Exhaust Pipe Flange
Exhaust Pipe Flange. This Flange is used with the Stock Type Mufflers. Replaces OEM # 18236-300-030 Note: Each Bike Require 4 Exhaust Pipe Flanges (One per Muffler). Order the Quantity you Require.
Exhaust Flange Bolt (Set/2)
Exhaust Pipe Flange Bolt (Set/2 Bolts). These Bolts are for the Exhaust Flanges Used when Installing Exhaust. Replace OEM # 93600-08022 Note: Each Bolt Set Includes 2 Bolts (Enough for One Flange). Order the Quantity of Bolt Sets you Require.
Exhaust Flange Clamp Bolt
Exhaust Flange Clamp Bolt. Used to Fasten the Stock Type Exhaust Flange Clamps. Replaces OEM # 92101-08032-0B Note: Each Bike Requires 4 Exhaust Flange Clamp Bolts (One per Exhaust Flange Clamp). Order the Quantity you Require.
Carb Stabilizer Bracket
Carburetor Stabilizer Bracket. These high quality made in Canada stainless steel brackets stabilize the carburetors when the air box is removed. A must have for pods or hard tails!
Starter Motor Bolt (Set/2)
Starter Motor Flange Bolt Set/2. Replaces OEM # 95700-06056-00
Seat Hinge Pin with Hardware
Seat Hinge Pin and Hardware Set, Includes 1 Pin, 1 Washer and 1 Attachment Clip. Note: Set Includes Enough for One Hinge, Order the Quantity of Sets you Require
Swingarm Pivot Bolt Locknut with Washer
Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM # 90354-268-000 (Locknut) and OEM # 90526-268-000 (Washer).
Tail Light Mounting Hardware Set
Tail Light Mounting Hardware Set (8 Pc. Set). This set is used to mount your tail Light to the tail Light bracket. Each set Includes 2X Rubber Grommets, 2X Collars, 2X Bolts and 2X Washers.
Front Signal Lamp Stay Nut & Washer Set
Front Signal Lamp Stay Nut & Washer Set. These are the Nuts and Washers that thread into the Front Turn Signal Stays. Set includes 2 Nuts and 2 Washers, Enough for both Front Signal Stays.