Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Seat Hinge Pin with Hardware
Seat Hinge Pin and Hardware Set, Includes 1 Pin, 1 Washer and 1 Attachment Clip. Note: Set Includes Enough for One Hinge, Order the Quantity of Sets you Require
Seat Hinge Set
Seat Hinge Set, This set is a reproduction of the original hinges no longer available from Honda. Set includes Hinge A, Hinge B, 2 Long Pins, 2 Attachment Lock Pins and 2 Washers.
Chain Guard Hardware Set
Chain Guard 9 Pc. Hardware Set. Includes 3 Bolts, 3 Metal Spring Washers and 3 Metal Washers. Replaces OEM # 92101-06014-0A (Bolts), OEM # 94111-06000 (Spring Washer) and OEM # 94101-06800 (Metal Washers).
Front Fender Hardware/ Fender Stay Hardware Set
3 PC. Front Fender Hardware/ Fender Stay Hardware Set. Includes Setting Rubber, Bolt and Metal Collar. Replaces OEM # 40513-310-000 (Rubber), OEM # 40514-310-000 (Metal Collar) and OEM # 92101-06022-0A (Bolt). Purchase the Quantity of Sets you Require for your Application
Side Stand Rubber Hardware Set
Side Stand Rubber Hardware Set, Includes Metal Collar, Bolt and Washer.
Turn Signal Lamp Lens Screw Set
Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A ALSO Fits our Signal Lens #11-2195 and Signals #11-2114 and #11-2149
Custom Drive Chain Adjuster Screws ~ Black ~ Joker Machine
Joker Machine Brand ~ Black Custom Type Drive Chain Adjuster Screws (Set of 2) with Gold Cadium Plated Nuts. Replace OEM # 90119-283-000 Features a CNC Machined Knob Section with 3 methods of Adjusting (By Hand with the Knurled Section, With an Open or Box Wrench on the Hex or with an Allen Wrench through the End of the Knob to the Screw). These Adjuster Screws Look Very Sharp and Improve the Look of your Bike. High Quality Made in the U.S.A.
Custom Type Black Fork Caps (Set/2) ~ Joker Machine
Joker Machine Brand ~ Custom Black Fork Cap Set of 2 with O-Rings. Replaces OEM # 90123-300-000 High quality CNC machined from billet aluminum, much lighter then the stock type. Gives your bike a great custom look. Made in the U.S.A.
Seat Lock Bar Assembly
Seat Lock Bar Assembly, Replaces OEM# 77220-340-003 / 77220-340-011
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Cylinder Head Cam Cover Breather Hardware Set
Cylinder Head Cam Cover Breather Hardware Set. Replaces OEM # 90018-300-000 X2 and OEM # 93500-06050-0A X1.
Steering Stem Bolt and Washer Set
Steering Stem Bolt and Washer Set. Includes 2 Bolts and 2 Washers. Replaces OEM # 92101-10040-0A X2 (Bolts) and OEM # 94102-10000 X2 (Washers).
Clutch Cover Screw Set
Clutch Cover Screw Set of 10 Screws. Replaces OEM # 93500-06028-0A X7 and 93500-06035-0A X3.
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish. High Quality, Made in the USA.
Clutch Release Actuator Assembly
Clutch Release Actuator Assembly, Replaces OEM# 22830-300-000 / 22860-300-006 / 22820-300-000 / 22841-300-000 / 91301-426-010
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-300-006
Three Bond Thread Lock
Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type. Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Muffler Clamp
Muffler Clamp - Universal Fits 1 1/2"
Muffler Clamp
Muffler Clamp - Universal Fits: 1 3/4"
Muffler Clamp
Muffler Clamp - Universal Fits: 1 7/8"
6" Hanger strap - 2 hole with nut & bolt - Chrome
6" Chrome Hanger strap with nut & bolt.
Center Stand Stop Rubber
Center Stand Stop Rubber fits the universal metal center stand stops we carry. 1 1/4" Diameter x 3/8" Cushion, Fits 3/8" Hole
Muffler Reducer
One piece muffler Reducer sleeve. Sleeve is 1" long and reduces universal mufflers with 44-45mm. ID (1.75") down to 38mm. (1.5").
57mm Exhaust Spring Set
57mm Exhaust Spring Set/2. Used for spring attached mufflers and exhaust pipes. Great for customizing your cafe racer, bobber, tracker or chopper. Works on any style motorcycle.
75mm Exhaust Spring Set
75mm Exhaust Spring Set/2. Used for spring attached mufflers and exhaust pipes. Great for customizing your cafe racer, bobber, tracker or chopper. Works on any style motorcycle.