Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Exhaust Pipe Flange
Exhaust Pipe Flange. This Flange is used with the Stock Type Mufflers. Replaces OEM # 18236-300-030 Note: Each Bike Require 4 Exhaust Pipe Flanges (One per Muffler). Order the Quantity you Require.
Exhaust Flange Bolt (Set/2)
Exhaust Pipe Flange Bolt (Set/2 Bolts). These Bolts are for the Exhaust Flanges Used when Installing Exhaust. Replace OEM # 93600-08022 Note: Each Bolt Set Includes 2 Bolts (Enough for One Flange). Order the Quantity of Bolt Sets you Require.
Exhaust Flange Clamp Bolt
Exhaust Flange Clamp Bolt. Used to Fasten the Stock Type Exhaust Flange Clamps. Replaces OEM # 92101-08032-0B Note: Each Bike Requires 4 Exhaust Flange Clamp Bolts (One per Exhaust Flange Clamp). Order the Quantity you Require.
Custom Fork Boot Collars ~ Joker Machine
Joker Machine Brand ~ Custom Fully CNC Machined Fork Boot Collar Set/2. A great solution for giving your stock bike (with the sheet metal headlight ears), an open fork tube Cafe look, while giving you an upper attachment point in order to retain your stock accordion style O.E.M. fork Gaitors. Designed to fit easily onto 35MM fork tubes and may be adjusted up-or-down along the tube into position, then tightened into place with the recessed set screw located in the groove (totally invisible).
Black Steering Stem Nut ~ Joker Machine
Joker Machine Brand ~ Black Steering Stem Nut, Hex Nut Size 30mm. Replaces OEM # 90304-415-000 High quality CNC machined part made in the U.S.A.
Carb Stabilizer Bracket
Carburetor Stabilizer Bracket. These high quality made in Canada stainless steel brackets stabilize the carburetors when the air box is removed. A must have for pods or hard tails!
Joker Machine Oil Tank Mounting Bushing Set/3
Joker Machine Brand Oil Tank Mounting Bushing Set/3 This set is for those who are running no oil tank side covers and an exposed stock oil tank. These trim bushings and grommets are a great alternative to the stock hardware! Stepped "Isolator" designed bushing obtains the right amount of tension on the rubber when fully tightened to reduce vibration on the oil tank. Bushing is fully CNC machined from 6061-T6 Aluminum. High quality alloy "Gold" Allen head mounting hardware is included, along with special rubber grommets.
Kibblewhite Performance Cylinder Head Nuts Pk/4
Kibblewhite Performance Cylinder Head Nuts Pk/4 These nuts are manufactured from a high strength premium steel that promotes excellent surface finish and tight tolerances, two critical factors for achieving correct fit and torque. After machining, the nuts are heat treated to a specific depth. This creates hard, wear resistant working surfaces, while retaining a ductile core to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance. Very high quality made in the USA!
Gas Tank Emblem
Gas Tank Emblem, Replaces OEM# 87122-300-020 / 87121-300-020 Fits: Honda CB750K (1969) CB750K (1970) - Frame Number 1044649 and lower Sold Each, Order the Quantity you Require
Stock Type Speedo/Tach Clamp Hardware Set
8 Speedo/Tach Clamp Hardware Set. This Set includes hardware for both speedo and tach clamps. Fits: Honda CB750K (1969-72) Stock Type Speedo and Tach Clamps This hardware set is used with our parts #73-1051 and #73-1052.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). There is not a "Honda" stencil on the rear of the cover due to copyright. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1969-70) WITH THE DUCK TAIL STYLE SEAT ONLY. If you have a CB750K 1970 see our listing below to compare the regular style to the duck style to ensure you are ordering the correct cover. The duck tail has a raised end and also has a different stitching pattern as shown. This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
High Performance Kibblewhite Cylinder Stud Nuts
High Performance Kibblewhite Black Oxide Finish Cylinder Stud Nuts Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder stud nuts are manufactured from high strength premium steel. After machining these nuts are heat treated to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance.
High Performance Kibblewhite Cylinder Studs
High Performance Kibblewhite Black Oxide Finish Cylinder Studs Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder studs are manufactured from tough steel, offering high-tensile and yield strengths, with just the right amount of ductility to resist fatigue and stress. The case end threads are designed to maintain good thread contact at high temperatures.
Steering Bearing Kit
Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Clutch Lever Return Spring
Clutch Lever Return Spring. This is the Spring Located Behind the Clutch Cover. Replaces OEM # 22815-300-000
Headlight Adjusting Screw & Spring Set
Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)
Flange Knock Bolt (Set/2)
Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000
Swingarm Pivot Bolt Locknut with Washer
Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM # 90354-268-000 (Locknut) and OEM # 90526-268-000 (Washer).
Tail Light Mounting Hardware Set
Tail Light Mounting Hardware Set (8 Pc. Set). This set is used to mount your tail Light to the tail Light bracket. Each set Includes 2X Rubber Grommets, 2X Collars, 2X Bolts and 2X Washers.
Special Clutch Washer
Special Angled Clutch Washer (16mm), Replaces OEM# 90481-292-000
Center Stand Spring
Center Stand Spring. Replaces OEM # 95014-71702
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Front Signal Lamp Stay Nut & Washer Set
Front Signal Lamp Stay Nut & Washer Set. These are the Nuts and Washers that thread into the Front Turn Signal Stays. Set includes 2 Nuts and 2 Washers, Enough for both Front Signal Stays.