Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K that match “honda sl125”►
- Honda
Replacement Mirror
Replacement Mirror (R.H) 4 1/2" Diameter, 10mm Thread. Replaces OEM# 88110-333-611
Gas/Fuel Tank Cap Latch Assembly
Gas/Fuel Tank Cap Latch Assembly, Includes Chrome Latch, Return Spring, Latch Mounting Pin and C-Clip.
Rear Wheel Bearing Retainer
Rear Wheel Bearing Retainer - Sprocket Side - Replaces OEM# 41231-283-000 This retainer is used on the (sprocket side) of the bike.
Rear Brake Light Stop Switch Spring
Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-300-000
Carb Holder Set
Carb Holder Set (Set of 4)
Air Filter Cover O-Rings Pk/2
Air Filter Cover Bolt O-Rings Pk/2, Replaces OEM# 91301-704-000
1969-70 Performance Main Jet Kit
1969-70 Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made. Kit includes Main Jets #140 (X4), #142 (X4), #145 (X4), #148 (X4)
Lens Screw
Tail Light Lens Screws, Pack of 10. Replaces OEM # 93500-04050-4J ISO Std. Pitch - Steel Plated Size: 4 x 50mm
Throttle Cable
Throttle Cable - Single top cable to 4 individual Carbs OEM Ref. # 17910-300-030 Made in Japan
Cam Chain
Cam Chain 219T x 94 D.I.D (Daido) Takes 01-8803 Rivet Link Pitch: .3061" Side Plate: Peanut Average Tensile Strength: 1800lbs OEM Ref # 14401-286-003 / 14401-410-003
Oil Tank Cap with Dipstick
Chrome Oil Tank Cap/Dipstick Assembly with Gasket. Replaces OEM # 55105-300-010
CB750K 1969-70 Tachometer Face Plate
Tachometer Face Plate (Like Original) Disassembly of tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. This face plate is supplied without jewels. You can re-use the jewels from the faces you replace or we sell those separately.
CB750K 1969-70 Speedo & Tachometer Face Plate Set ~ KM/H
Speedometer & Tachometer Face Plate (Like Original) Set ~ KM/H Type. Disassembly of speedometer and tachometer is required. All face plates are "printed" in the United Kingdom on the highest quality materials. Every detail has been designed very accurately to achieve an exact copy of the original face plates. With this set you are able to restore your gauges to the manufacturers standards. This face plate set is supplied without jewels. You can re-use the jewels from the faces you replace or we sell those separately.
CB750K 1969-70 Speedo & Tach Face Decal Set ~ MPH
Speedometer & Tachometer Face Decal (Sticker) Set ~ MPH Type. These decals must be applied over the original gauge face to illuminate blue/green. Disassembly of speedometer and tachometer is required. Mounting holes are pre cut to simplify application. Openings for odometer, tripmeter and warning lights must be cut out after application. Removal of original information printed on OEM plastic face is required prior to application of these decals. All blue/green areas are the plastic face showing through. All decals are "printed" in North America on the highest quality materials.
Brake Rod Joint Pin w Cotter Pin
Brake Rod Joint Pin with Cotter Pin, Replaces OEM # 95015-52000 (Joint Pin) and OEM # 94201-16250 (Cotter Pin).
Brake Rod Adjusting Nut
Brake Rod Adjusting Nut, Replaces OEM # 95015-42000
Rear Brake Light Stop Switch Bracket
Rear Brake Light Stop Switch Bracket, Replaces OEM # 50156-300-020
Fork Cover Rubber Washer Set
Fork Cover Rubber Washer Set/2. These are the Rubber Washers used between the Fork Cover and the Headlight Bucket.
Seat Hinge Pin with Hardware
Seat Hinge Pin and Hardware Set, Includes 1 Pin, 1 Washer and 1 Attachment Clip. Note: Set Includes Enough for One Hinge, Order the Quantity of Sets you Require
Brake Pedal Return Spring
Brake Pedal Return Spring. This is the Spring Used where the Brake Pedal Attaches to the Brake Spindel. Replaces OEM # 46514-300-000
Muffler Shield Hardware Set
12PC. Muffler Shield Hardware Set. This Set is Used to Attach the Muffler Protector Cover (Shield) to the Stock Muffler. Each Set Includes (3) Screws, (3) Metal Washers and (6) Fibre Spacers. Note: This Set Includes the Hardware to Attach One Protector Shield to the Stock Muffler, If you are Replacing Both Stock Type Shields Please Order 2 Sets.
CB Chrome Mirror - Early Stock Type
CB750 Eary Stock Type Chrome Mirror - 4" Diameter Mirror, 8" Stem, 10mm. RH Thread. Replaces OEM # 88110-300-000 Note: These Fit Both Left And Right Side Of Bike, Order 2 For A Complete Set
Ignition Switch Mounting Bracket & Hardware Set
Ignition Switch Mounting Bracket & Hardware Set. Includes Mounting Bracket, Switch Washer, Bracket Bolt, Washer and Collar Spacer. Replaces Mounting Bracket OEM # 50375-300-000B
Rear Fender Eliminator
Rear Fender Eliminator. Includes holes for custom tail light and license plate install. These are Great for Cafe builds and custom work! If you want a Licence Plate Frame to go with this, Our #73-0087 or 73-0088 fit perfectly, Tailllight #11-2325
Front Master Cylinder Reservoir Diaphragm
Front Master Cylinder Reservoir Diaphragm. Replaces OEM # 45520-300-000