Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K that match “screws nuts bolts tools”►
- Honda
High Performance Kibblewhite Cylinder Stud Nuts
High Performance Kibblewhite Black Oxide Finish Cylinder Stud Nuts Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder stud nuts are manufactured from high strength premium steel. After machining these nuts are heat treated to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance.
Speedo/Tach Cap Nut Set/4
Set of 4 Cap Nuts Used to Mount the Stock OEM Type Speedometer and Tachometer. Replaces OEM # 94021-06020 X4.
Tach Drive Plug Block Off w O-Ring
Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing. Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach. Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy. Fits tachometer cables that are approximately 15mm in diameter with a 10.5mm groove and held in place with a screw.
Oil Filter Bolt
Oil Filter Bolt OEM Ref # 15420-300-020
Engine Bolt Set
Engine Bolt Set, 60 Pieces, Includes 13 Different Bolt Types and 2 Allen Keys.
Throttle Adjusting Bolt
Throttle Adjusting Bolt, Replaces OEM # 53190-300-000
Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring. Note: We sell these each, order the quantity you require
Clutch Cover Screw Set
Clutch Cover Screw Set. Includes all 3 Screws needed to fasten the Clutch Cover. Replaces OEM # 93700-06016-0B X3.
Clutch Cover Screw Set
Clutch Cover Screw Set of 10 Screws. Replaces OEM # 93500-06028-0A X7 and 93500-06035-0A X3.
Carb Float Setting Tool (CB750 1969-76 Models)
Carb Float Setting Tool. Use this tool to help set your floats with ease! This pre-set float setting gauge is for the CB750 1969-76K and 1975-76F Supersport models.
Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine
Joker Machine Brand ~ Custom Black Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch, Return Spring and Alloy Screw attachment with nut. A fully CNC machined, billet aluminum alternative to the discontinued cast thumb latches. Install is easily made with the provided alloy screw attachment with nut. Much more durable and stronger than the original die-cast piece. High quality CNC machined part made in the U.S.A. Ties in great with our Custom Black Gas/Fuel Tank Cap (#73-1156)
Exhaust Flange Clamp Bolt
Exhaust Flange Clamp Bolt. Used to Fasten the Stock Type Exhaust Flange Clamps. Replaces OEM # 92101-08032-0B Note: Each Bike Requires 4 Exhaust Flange Clamp Bolts (One per Exhaust Flange Clamp). Order the Quantity you Require.
Clutch Spring Bolt Set
Clutch Spring Bolt Set of 4. Replaces OEM # 95701-06020-00 X4.
Kibblewhite Performance Cylinder Head Nuts Pk/4
Kibblewhite Performance Cylinder Head Nuts Pk/4 These nuts are manufactured from a high strength premium steel that promotes excellent surface finish and tight tolerances, two critical factors for achieving correct fit and torque. After machining, the nuts are heat treated to a specific depth. This creates hard, wear resistant working surfaces, while retaining a ductile core to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance. Very high quality made in the USA!
Side Cover Emblem Fixing Nut Pk/2
Side Cover Emblem Fixing Nut (3mm) Pk/2, Used to Attach the Side Cover Emblems. Replaces OEM # 90313-567-000 Check your bike to see the quantity you require
Tongued Front Disk Rotor Washer & Nut Set
Front Disk Rotor A8 Tongued Washer & Nut Set. This Set Includes 3 Washers and 6 Nuts. Replaces OEM # 94108-18000 (Tongued Washers) and OEM # 94001-08000-0S (Nuts). These Washers are used for Locking the Nuts that Hold the Front Disc to the Hub.
Chrome Spin On Oil Filter
Chrome Spin On Oil Filter Replaces Stock OEM Housing, Filter Bolt and Paper Element Filter. Note: When installing screw in the threaded bung first and then install the filter onto the bung.
Headlight Adjusting Screw & Spring Set
Headlight Adjusting Screw & Spring Set. Each Set Includes One Screw and One Spring. Replaces OEM # 33103-346-670 (Screw) and OEM # 33107-300-003 (Spring)
Front Brake Caliper Bleed Screw
Front Brake Caliper Bleed Screw. Replaces OEM # 45109-300-003
Air Screw Needle O-Ring
Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require
Fuel Petcock Screw and Washer Set
Set of 2 Chrome Plated Fuel Petcock Screws with 2 Fibre Washers. These Screws replace OEM # 93500-06028-0A These screws fasten the fiber washers to the inside of the petcock and attach to the Fuel Tank. It is always a good idea to replace these when installing a New Fuel Petcock on your CB750K (1969-74), CB550K (1974) or CB500K (1971-73). Purchase these with our Petcock #20-8039
Alternator Cover Mounting Screw Set
Alternator Cover Mounting Screw Set. Set of 8 Mounting Screws Used to Fasten the Main Alternator Cover in place (Not the Alternator Face Plate). Replaces OEM # 93500-06032-OA X7 / 93500-06035-OA X1
Exhaust Flange Bolt (Set/2)
Exhaust Pipe Flange Bolt (Set/2 Bolts). These Bolts are for the Exhaust Flanges Used when Installing Exhaust. Replace OEM # 93600-08022 Note: Each Bolt Set Includes 2 Bolts (Enough for One Flange). Order the Quantity of Bolt Sets you Require.
Exhaust Flange Clamp with Bolt ~ Right Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Right Side of the Bike. Replaces OEM # 18231-300-010 Fits: Honda CB750K (1971-76) Right Side Muffler Note: Each Bike Requires 2 Right Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.
Exhaust Flange Clamp with Bolt ~ Left Side
Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Left Side of the Bike. Replaces OEM # 18232-300-010 Fits: Honda CB750K (1971-76) Left Side Muffler Note: Each Bike Requires 2 Left Side Exhaust Flange Clamps(One per Muffler). Order the Quantity you Require.