Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included that match “honda sl125”►
- Honda
![Honda CB750K Turn Signal Lamp Gasket](/images/parts/100/11-2085.jpg)
Turn Signal Lamp Gasket
Turn Signal Lamp Gasket, Replaces OEM # 33443-268-671
![Honda CB750K Pilot Lamp Indicator Panel Dash Light Harness](/images/parts/100/11-2181.jpg)
Pilot Lamp Indicator Panel Dash Light Harness
Pilot Lamp Indicator Panel Dash Light Harness, Replaces OEM# 37581-323-000 / 37581-374-670 Comes complete with bulbs.
![Honda CB750K Kibblewhite Performance Cylinder Head Nuts Pk/4](/images/parts/100/12-0117.jpg)
Kibblewhite Performance Cylinder Head Nuts Pk/4
Kibblewhite Performance Cylinder Head Nuts Pk/4 These nuts are manufactured from a high strength premium steel that promotes excellent surface finish and tight tolerances, two critical factors for achieving correct fit and torque. After machining, the nuts are heat treated to a specific depth. This creates hard, wear resistant working surfaces, while retaining a ductile core to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance. Very high quality made in the USA!
![Honda CB750K High Performance Kibblewhite Cylinder Stud Nuts](/images/parts/100/18-7005-A.jpg)
High Performance Kibblewhite Cylinder Stud Nuts
High Performance Kibblewhite Black Oxide Finish Cylinder Stud Nuts Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder stud nuts are manufactured from high strength premium steel. After machining these nuts are heat treated to prevent cracking under load. The premium black oxide treatment gives an excellent, corrosion resistant appearance.
![Honda CB750K High Performance Kibblewhite Cylinder Studs](/images/parts/100/18-7007-A.jpg)
High Performance Kibblewhite Cylinder Studs
High Performance Kibblewhite Black Oxide Finish Cylinder Studs Set/16. Made in the USA by Kibblewhite who have been making High Quality Performance parts for 75+ years. Kibblewhite cylinder studs are manufactured from tough steel, offering high-tensile and yield strengths, with just the right amount of ductility to resist fatigue and stress. The case end threads are designed to maintain good thread contact at high temperatures.
![Honda CB750K Special Clutch Washer](/images/parts/100/29-7034.jpg)
Special Clutch Washer
Special Angled Clutch Washer (16mm), Replaces OEM# 90481-292-000
![Honda CB750K Left Side Footrest Return Spring](/images/parts/100/73-0894.jpg)
Left Side Footrest Return Spring
Left Side Footrest Return Spring. This is the Spring that Allows the Left Side Footpeg to be Lowered and Raised. Replaces OEM # 50644-300-670
![Honda CB750K Right Side Footrest Return Spring](/images/parts/100/73-0987.jpg)
Right Side Footrest Return Spring
Right Side Footrest Return Spring. This is the Spring that Allows the Right Side Footpeg to be Lowered and Raised. Replaces OEM # 50617-300-670
![Honda CB750K Rear Stock Type Rim](/images/parts/100/73-1076.jpg)
Rear Stock Type Rim
Chrome Rear Stock Type Rim, 2.15" Width x 18" x 40 Hole, Overall Actual Width 3.15". These are high quality rims made by D.I.D who originally made the OEM rims. Replaces OEM # 42701-300-013
![Honda CB750K Steering Stem Bolt and Washer Set](/images/parts/100/73-1134.jpg)
Steering Stem Bolt and Washer Set
Steering Stem Bolt and Washer Set. Includes 2 Bolts and 2 Washers. Replaces OEM # 92101-10040-0A X2 (Bolts) and OEM # 94102-10000 X2 (Washers).
![Honda CB750K Kick Starter Stopper Spring with Steel Ball](/images/parts/100/29-7013.jpg)
Kick Starter Stopper Spring with Steel Ball
Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM # 28333-300-000 (Spring) and OEM # 96211-08000 (Steel Ball).
![Honda CB750K Chrome Speedometer & Tachometer Cover Set](/images/parts/100/02-2480.jpg)
Chrome Speedometer & Tachometer Cover Set
Set of Chrome Plated Speedometer & Tachometer Covers. These go over the stock speedo and tach gauges to give them a great chrome look! Diameter at Base of Cover - 103mm Diameter at Top of Covers - 87mm Height of Covers - 37mm Includes a small hole in one of the covers for the tripmeter. Note: Speedo/Tach Not Included, Shown in Photo to illustrate how they look when installed.
![Honda CB750K Dynatek Dyna S Ignition System](/images/parts/100/07-9988.jpg)
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
![Honda CB750K Contact Point](/images/parts/100/14-0009.jpg)
Contact Point
Contact Point - Right Side OEM Ref # 30203-300-005 / 30203-300-154
![Honda CB750K Contact Point](/images/parts/100/14-0010.jpg)
Contact Point
Contact Point - Left Side OEM Ref # 30204-300-005 / 30204-300-154
![Honda CB750K Front Wheel Bearing](/images/parts/100/28-6302.jpg)
Front Wheel Bearing
Front Wheel Bearing with 2 Synthetic Shields - 6302-2RS Size High Quality Made in Japan 2 Used Per Front, Order Quantity you Require
![Honda CB750K Cylinder Dowel Pin (12x22mm)](/images/parts/100/29-7014.jpg)
Cylinder Dowel Pin (12x22mm)
Cylinder Dowel Pin 12x22mm Size. Replaces OEM # 94301-12220 Note: 2 Used Per Bike, Order the Quantity you Require
![Honda CB750K Cylinder Dowel Pin (12x15mm)](/images/parts/100/29-7015.jpg)
Cylinder Dowel Pin (12x15mm)
Cylinder Dowel Pin 12x15mm Size. Replaces OEM # 94301-12150 Note: Sold Each, Order the Quantity you Require
![Honda CB750K Carburetor Needle Jet Holder](/images/parts/100/48-9032.jpg)
Carburetor Needle Jet Holder
Carburetor Needle Jet Holder. Replaces OEM # 16139-300-004 Note: Sold Each, One Used per Carburetor
![Honda CB750K Rear Turn Signal Mount & Collar Set](/images/parts/100/73-0127.jpg)
Rear Turn Signal Mount & Collar Set
Rear Turn Signal Mount, Collar and Rubber Set. Includes both Left and Right Sides. These are needed when installing the Rear signals. Replaces OEM # 33605-323-670 (Left Side) & 33606-074-010 (Right Side).
![Honda CB750K Center Stand Spring Plate](/images/parts/100/73-0890.jpg)
Center Stand Spring Plate
Center Stand Spring Plate, This is the Plate the Center Stand Spring Attaches to. Replaces OEM # 50523-300-010
![Honda CB750K Chain Guard Hardware Set](/images/parts/100/73-0991.jpg)
Chain Guard Hardware Set
Chain Guard 9 Pc. Hardware Set. Includes 3 Bolts, 3 Metal Spring Washers and 3 Metal Washers. Replaces OEM # 92101-06014-0A (Bolts), OEM # 94111-06000 (Spring Washer) and OEM # 94101-06800 (Metal Washers).
![Honda CB750K Chain Oiler Plug ~ Joker Machine](/images/parts/100/73-1063.jpg)
Chain Oiler Plug ~ Joker Machine
Joker Machine Brand ~ Chain oiler (final shaft) plug eliminates the messy chain oiler assembly with one of these simple plugs! Replaces OEM # 23523-300-310 Installs easily by cleaning hole with brake cleaner to remove all traces of oil. Then fill with RTV slicone (Permatex) and tap the chain oiler plug in place. High quality CNC machined part made in the U.S.A.