Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included►
- Honda
Fork Tube Set
Fork Tube Set/2, Length (605mm or 23 13/16"), 35mm OD. NOTE: LENGTH is 23 13/16", one Inch Larger then Stock Length for these Models below. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) Also Fits These Models, Confirm the 605mm Length is what you Require Before Ordering Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 23 13/16" or 605mm is the Length you would like
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No chrome trim or hardware included just re-use existing hardware). There is NO HONDA LOGO ON THE REAR. There is a layer of foam sewn into the top of the seat cover to improve ride comfort and smooth out any defects in your seat foam. Each seat cover is made entirely by hand, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Comes with complete installation instructions as well as step by step instructions on how to repair damaged seat foam. Fits: the Original Stock Honda CB750K (1972-76) Seat Only This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Cast Aluminum Finned Starter Motor Cover
Cast Aluminum Finned Starter Motor Cover, Made in the USA. Replaces OEM # 31280-300-000 This is a new cover designed and produced like the ones from the 70's that aren't made anymore. This cover is delivered in as-cast condition. As such, Sandblasting, painting, or powder coating will be required if you want a look other then the cast aluminum look. As delivered it is a close match for an original patina engine. Note: Gasket and Hardware Not Included with Cover
Front Signal Lamp Stay
Front Signal Lamp Stay - Chrome. Body Length 40mm, Thread 30mm, Total Length 70mm. Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
Ignition Switch Mounting Bracket & Hardware Set
Ignition Switch Mounting Bracket & Hardware Set. Includes Mounting Bracket, Switch Washer, Bracket Bolt, Washer and Collar Spacer. Replaces Mounting Bracket OEM # 50375-300-000B
Valve Spring Retainer
Valve Spring Retainer, Replaces OEM # 14771-551-020 Sold Each, Order the Quantity you Require.
Swing Arm Felt (Set/2)
Swing Arm Felt (Set/2), Replaces OEM # 52145-283-000
Horn Hardware Set
Horn Hardware Set, Includes 2 Bolts and 2 Washers. Replaces OEM # 92101-06016-0A X2 (Bolt) and OEM # 94111-06000 X2 (Washer).
Cylinder Head Cam Cover Breather Hardware Set
Cylinder Head Cam Cover Breather Hardware Set. Replaces OEM # 90018-300-000 X2 and OEM # 93500-06050-0A X1.
Steering Stem Bolt and Washer Set
Steering Stem Bolt and Washer Set. Includes 2 Bolts and 2 Washers. Replaces OEM # 92101-10040-0A X2 (Bolts) and OEM # 94102-10000 X2 (Washers).
Clutch Cover Screw Set
Clutch Cover Screw Set of 10 Screws. Replaces OEM # 93500-06028-0A X7 and 93500-06035-0A X3.
Headlight Bucket Case
Black Headlight Bucket / Case, Stock Design - Replaces OEM # 61301-300-020B
Rear Fender Eliminator
Rear Fender Eliminator. Includes holes for custom tail light and license plate install. These are Great for Cafe builds and custom work! If you want a Licence Plate Frame to go with this, Our #73-0087 or 73-0088 fit perfectly, Tailllight #11-2325
Velocity Stack Set
Velocity Stack Set. These Velocity Stacks are a High Quality, 39mm ID, Taper Tipped Build. Set Comes Complete with 4 Velocity Stacks with Debris Screens, Set Screws and Set Screw Allen Wrench. These install easily and look amazing once installed!
Fork Tube Set
Fork Tube Set/2, Length (580mm or 22 13/16"), 35mm OD. Fits: Honda CB750K (1972) Higher then Frame# 2093730 Only, CB750K (1973-76) NOTE: LENGTH is 22 13/16", one Inch Shorter then Stock Length for these Models below. Fits: Honda CB750K (1977) Higher then Frame# 2707508 Only, CB750K (1978), CB750F (1977-78) Supersport, CB750A (1976-78) Hondamatic Before ordering Please Confirm 22 13/16" is the Length you would like
Chrome Stock Type Front Fender
Chrome Stock Type Front Fender, Replaces OEM # 61100-341-700XW Includes the chrome support struts, bracket for the speedo cable and the bracket to hold the brake hose in place.
Chrome Stock Type Rear Fender
Chrome Stock Type Rear Fender, Replaces OEM # 80100-341-000
Stock Type Gas/Fuel Tank
Stock Type Gas/Fuel Tank. Tank comes in primer grey ready for you to paint your color of choice. Fits: Honda CB750K (1969-74) Does not include gas cap #20-0045, petcock #20-8039, emblems or any other items.
Rectifier/Regulator
Rectifier-Regulator: This is a combination unit which will replace the OEM regulator and rectifier. This has the OEM type ground wiring and Stock Type Plugs. Dimensions 80mm Length, 94mm Width, 27mm Height, Hole Distance 70.0mm Center to Center. Instructions not included.
Black Stock Type Front Fender
Black Stock Type Front Fender, Replaces OEM # 61100-341-700XW Includes the support struts, bracket for the speedo cable and the bracket to hold the brake hose in place. Fits: Honda CB750K (1972) - Frame # 2093731 and Higher, CB750K (1973-75), CB750K (1976) - Frame # 2540001 to 2575894 CB550K (1974-76)
Black Stock Type Rear Fender
Black Stock Type Rear Fender, Replaces OEM # 80100-341-000
Custom Black Gas/Fuel Tank Cap ~ Joker Machine
Joker Machine Brand ~ Custom Black Gas/Fuel Tank Flip Up Billet Cap. Includes Cap with a spring loaded alloy flange, replaceable rubber gasket and alloy screw attachment. Replaces OEM # 17510-323-310 Installs easily onto the tank hinges with an alloy screw (not rivets found on the stock set-up) in minutes. Lightweight design is made from a solid block of 1" thick Billet aluminum. Works with stock style latching mechanisms (Sold Separately). High quality CNC machined cap made in the U.S.A.
Custom Black Gas/Fuel Tank Cap Latch Assembly ~ Joker Machine
Joker Machine Brand ~ Custom Black Gas/Fuel Tank Cap Latch Assembly, Includes Black Latch, Return Spring and Alloy Screw attachment with nut. A fully CNC machined, billet aluminum alternative to the discontinued cast thumb latches. Install is easily made with the provided alloy screw attachment with nut. Much more durable and stronger than the original die-cast piece. High quality CNC machined part made in the U.S.A. Ties in great with our Custom Black Gas/Fuel Tank Cap (#73-1156)
Oil Pressure Gauge Assembly ~ Black ~ Joker Machine
Joker Machine Brand ~ Oil Pressure Gauge Assembly. Black Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes! Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visibility. Just loosen the billet hex fitting, rotate into position, then tighten. High quality made in the U.S.A
TC Bros. Forward Controls Kit
TC Bros. Brand Bolt-On Forward Controls Kit. Kit includes a pair of forward controls featuring CNC machined, knurled aluminum pegs. The mounting plates are heavy duty powder coated steel and bolt on in place of your front motor mount on one side and u-bolt to your frame on the other side. The spacers are TIG welded to the mounting plates. Everything bolts on using your stock mounting hardware and with no frame modifications. The only welding required is a tab that is welded to your stock brake pedal in order to attach the linkage rods. It is easily done and mounting instructions with pictures are included with each kit. This kit makes long trips much more comfortable due to the fact that your legs are extended forward rather than bent. Great for choppers, bobbers, or even stock bikes. High Quality, Made in the USA. Linkage Kit Not Included
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish. High Quality, Made in the USA.
Stock Type Muffler Set.
Stock Type Muffler Set. These brand new mufflers are the 341 Style with non replaceable internal baffle. Beautiful high quality, newly produced stock type muffler set. High quality chrome. Buy this now to make your bike stand out! Fits: Honda CB750K (1972-76) Hardware Sold Separately
Electronic Ignition System
Electronic Ignition System. Direct plug-in fitment. Increase RPM 100% tested before shipment, high reliability and high performance! This ignition can be used with your stock coils or any other coils 3 ohms or higher.
Clutch Release Actuator Assembly
Clutch Release Actuator Assembly, Replaces OEM# 22830-300-000 / 22860-300-006 / 22820-300-000 / 22841-300-000 / 91301-426-010
Clutch Ball Retainer
Clutch Ball Retainer, Replaces OEM# 22860-300-006
Air Filter Cover Gasket
Air Filter Cover Gasket, Replaces OEM# 17221-341-000
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-17001 Band Overall Size: 6.125" (155mm) Measuring from the inside of the brackets.
Stock Style Stator
Stock Style Stator, Replaces OEM # 31102-300-045 / 31102-300-035 / 31102-393-025 / 31102-393-005 / 31102-393-015. We had these hard to find stators re-manufactured to keep your CB on the road!
Horn ~ Similar to Stock Style
Horn with Chrome Cover - 12 Volt 3 Amp - 103 Decibel - This is Not identical to the stock type but has a somewhat similar design to the stock type on these bikes.
CB750K 1972-76 Seat Assembly
Stock Style CB750K 1972-76 Seat Assembly, Replaces OEM# 77200-341-701 / 77200-341-000 / 77200-341-700. This Quality Seat Comes Complete with the Strap, Chrome Trim, Bottom Rubbers etc and is ready For a Quick and Painless Install! Back of Seat does not say "Honda"
Honda Brand OEM ~ Cotter Valve
Honda Brand OEM ~ Cotter Valve. This is a genuine Honda made Cotter Valve, Replaces OEM# 14781-551-000 Sold Each, Order the Quantity you Require
Honda Brand OEM ~ Neutral Switch with Screw
Honda Brand OEM ~ Neutral Switch with Screw, OEM# 35752-300-020 Honda does not include the O-Ring, we sell those separately
CB750 Valve Rocker Arm A OEM # 14431-300-030
CB750 Valve rocker arm A - Honda OEM # 14431-300-030
CB750 Valve Rocker Arm B OEM # 14432-300-030
CB750 Valve Rocker Arm B - Honda OEM # 14432-300-030 Quality made in Japan
Honda Brand OEM ~ Rear Wheel Bearing Retainer
Honda Brand OEM ~ Rear Wheel Bearing Retainer, OEM# 41231-300-020.
Handmade Christmas Stocking
HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Ragsâ€. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.
Universal Glas-Pak Insert
Universal Glas-Pak Insert - Fits 1 1/2" Pipes - Glass Pak's Actual Size 1 3/8" Tone down your TT or Drag Pipes
Tire Valve Stem
Tire Valve Stem - Straight Metal Type
Tire Valve Stem
Tire Valve Stem - Straight Rubber Type
Tire Valve Stem
Tire Valve Stem - 90 Degree Metal Type
Tire Valve Stem Caps
Tire Valve Stem Caps - Pk/10 Metal Caps with Core Removal Notch Built In
Tire Valve Stem Caps
Tire Valve Stem Caps - Pk/2 Metal Caps with Core Removal Notch
Tire Fill Valve
Ninety Degree Tire Fill Valve
Rivet Link
Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains