Honda ► CB750K ►
-
Here’s our hand-picked list of parts and accessories for your Honda CB750K with universal parts included that match “handlebar”►
- Honda
Handlebar Clamp Hardware Set
Handlebar Clamp Hardware Set. Set Includes 4 Chrome Plated Bolts and 4 Washers. This Hardware Set is for the Stock Type Clamp (Holder) that Attaches Over the Handlebar. Replaces OEM # 93101-08040-0B X4 (Bolts) and 90518-921-000 X4 (Washers). Fits: Stock Type Handlebar Clamps on the Honda CB750K (1969-75)
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
Handlebar Brake Lever Pivot Bolt & Nut Set
Brake Lever Pivot Bolt & Nut. This is the Set that Fastens the Brake Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-300-000
Handlebar - Stock Type ~ CB750K 1973-76 / CB750F 1975-76
Stock Type Handlebar for the CB750K (1973-76), CB750F (1975-76) - Chrome. Drilled for wires like the OEM type. Bar Diameter - 7/8" - 22mm, Length - 32" - 812mm, Pull Back - 5 1/4" - 133mm, Inner Rise - 6 1/2" - 165mm, End Rise - 8" - 203mm, Center Width - 6 1/2" - 165mm, Base Width - 9 1/2" - 241mm, Knurl Width - 4 1/2" - 114mm, Control Length - 9" - 228mm, Drilled - YES Replaces OEM # 53100-341-700 Note: These Are Drilled For Wires
Honda OEM Type Grips
Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 135mm Length. Replaces OEM #' 53165-342-670 / 53166-342-670
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Bar Switch Assembly ~ Left (Clutch) Side
Bar Switch Assembly ~ Left (Clutch) Side - Black. Replaces OEM # 35200-374-671
Bar Switch Assembly ~ Right (Brake) Side
Bar Switch Assembly ~ Right (Brake) Side - Black. Replaces OEM # 35300-341-671
Clutch Cable ~ 10" Extended
10" Extended Clutch Cable - OEM Ref # 22870-410-000 Same as the Stock Type Except 10" Longer. This works great when using non stock handlebars. Total end to end length about 60".
Pilot Lamp Indicator Panel Dash Light Harness
Pilot Lamp Indicator Panel Dash Light Harness, Replaces OEM# 37581-323-000 / 37581-374-670 Comes complete with bulbs.
Handlebar
Dirtbike Custom Type Bar - Chrome. Bar Diameter - 7/8" - 22mm, Length - 31 3/4" - 806mm, Pull Back - 4" - 102mm, Inner Rise - 4 1/4" - 108mm, End Rise - 6 3/4" - 171mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar
Ape Hanger Handlebar - Chrome Bar Thickness - 22mm - 7/8", Length - 838mm - 33", Pull Back - 203mm - 8", Inner Rise - 305mm - 12", End Rise - 248mm - 9 3/4", Center Width - 127mm - 5", Base Width - 228mm - 9", Control Length - 216mm - 8 1/2", Drilled - NO
Handlebar
Z Handlebar - Satin Black Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
Handlebar
Vintage MX Custom Type Bar - Chrome. Bar Diameter - 7/8" - 22mm Length - 33" - 838mm Pull Back - 4" - 101mm Inner Rise - 5" - 127mm End Rise - 7" - 178mm Center Width - 8" - 203mm Base Width - 11" - 279mm Control Length - 8" - 203mm Drilled - NO Note: Not Drilled for wires
Handlebar
Clubman/Cafe Bar - Chrome Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
HandleBar
HandleBar Drag Bar Type Chrome Bar Diameter - 7/8" - 22mm, Length - 27.5" - 698mm, Pull Back - 3.5" - 89mm, Center Width - 6" - 152mm, Knurl Width - 4.75" - 120mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Café/Clubman Style 7/8" Diameter
HandleBar
HandleBar Daytona Tour Type Chrome Bar Diameter - 7/8" - 22mm, Length - 29 1/4 - 743mm, Pull Back - 4" - 100mm, Inner Rise - 4" - 100mm, End Rise - 6 1/4" - 158mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar European Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Superbike Type Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 4" - 100mm, Inner Rise - 3 1/8" - 79mm, End Rise - 4 1/4" - 108mm, Center Width - 5" - 127mm, Base Width - 7" - 177mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Suzuki GS Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30" - 762mm, Pull Back - 6" - 152mm, Inner Rise - 6 3/4" - 171mm, End Rise - 9" - 228mm, Center Width - 5 1/2" - 140mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Black Café/Clubman Style Width - 27 3/4" - Rise - 4" - Pullback - 1 1/2" x 7/8"Dia.
HandleBar
HandleBar - Black Drag Bar Type Bar Thickness - 7/8" - 22mm, Length - 27.5" - 698mm, Pull Back - 3.5" - 890mm, Center Width - 6" - 152mm, Knurl Width - 4.75" - 120mm, Control Length - 10" - 254mm, Drilled - NO
Handlebar - Black
Daytona Tour Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 29 1/4 - 743mm, Pull Back - 4" - 100mm, Inner Rise - 4" - 100mm, End Rise - 6 1/4" - 158mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
European Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Superbike Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 4" - 100mm, Inner Rise - 3 1/8" - 79mm, End Rise - 4 1/4" - 108mm, Center Width - 5" - 127mm, Base Width - 7" - 177mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Street Tracker - Black Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm, Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO Not Drilled for Wires
Handlebar - Black
Drag Bar - Gloss Black Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Drag Bar - Chrome Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Drag Bar - Gloss Black Bar Thickness - 7/8" - 22mm, Length - 31" - 812mm, Pull Back - 3 3/4" - 95mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Drag Bar - Chrome Bar Thickness - 7/8" - 22mm, Length - 31" - 812mm, Pull Back - 3 3/4" - 95mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
Ape Hanger Handlebar - Gloss Black Bar Thickness - 22mm - 7/8", Length - 838mm - 33", Pull Back - 203mm - 8", Inner Rise - 305mm - 12", End Rise - 248mm - 9 3/4", Center Width - 127mm - 5", Base Width - 228mm - 9", Control Length - 216mm - 8 1/2", Drilled - NO
Handlebar - Chrome
Z Handlebar - Chrome Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Yamaha Special Bar Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 12" - 305mm, Inner Rise - 7 3/4" - 197mm, End Ride - 6" - 152mm, Center Width - 7 1/2" - 190mm, Base Width - 11" - 280mm, Knurl Width - 4 1/2" - 115mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar - CB 750 Special Bar Bar Thickness - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 6 1/2" - 165mm, Inner Rise - 6 1/4" - 158mm, End Rise - 5" - 127mm, Center Width - 7" - 178mm, Base Width - 10" - 254mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Virago Type Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm. Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Dirt / Street Track Type - Chrome Bar Thickness - 7/8" - 22mm, Length - 34 3/8" - 873mm, Pull Back - 6 1/8" - 155mm, Inner Rise - 4 1/4" - 107mm, End Ride - 6" - 152mm, Center Width - 6" - 152mm, Base Width - 8 1/2" - 216mm, Control Length - 10 1/2" - 266mm, Drilled - NO
Clip - On Handlebar
Clip - On HandleBars (34mm) Bar is 7/8" Dia & 8" Long
Clip - On Handlebar
Clip - On HandleBars (36mm) Bar is 7/8" Dia & 8" Long
Clip - On Handlebar
Clip - On HandleBars (37mm) Bar is 7/8" Dia & 8" Long
Clip - On Handlebar
Clip - On HandleBars (38mm) Bar is 7/8" Dia & 8" Long
Clip - On Handlebar
Clip - On HandleBars (39mm) Bar is 7/8" Dia & 8" Long
Clip - On Handlebar
Clip - On HandleBars (41mm) Bar is 7/8" Dia & 8" Long
Handlebar - Black
Clubman/Cafe Bar - Black Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
Handlebar End Plugs
Aluminum End Plugs MX Or Street
Handlebar End Plugs
Aluminum End Plugs Yamaha Threaded
Handlebar End Plugs
Aluminum End Plugs Honda CBR
Handlebar End Plugs
Aluminum End Plugs Honda / Suzuki / Kawasaki
Honda Handlebar Pad
Honda Handlebar Pad Protect your chest and spruce up the look of your bike with a brand new handlebar pad. These will fit to 1/8" and 7/8" bars.
Clip - On Handlebars ~ Black
Clip - On HandleBars Set/2 (35mm) ~ Gloss Black Bar is 7/8" Dia & 8" Long