HondaCBX1000 ► 

Refine Search Results
Honda CBX1000 Honda OEM Type Grips
USD$ 9.60
Listed Models

Honda OEM Type Grips

#02-2422 | Honda CBX1000 (1979-1982)

Honda OEM Type Rubber Grip Set - Black - Closed end type for 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000

USD$ 9.60
Listed Models
Honda CBX1000 Honda OEM Type Grips ~ Open End
USD$ 12.55
Listed Models

Honda OEM Type Grips ~ Open End

#02-2481 | Honda CBX1000 (1979-1982)

Honda OEM Type Rubber Grips - Black - Open End Type with End Plugs Included - For 7/8" bars. These are replica's of the original type grips from the factory. 130mm Length. Replaces OEM #' 53165-390-780 / 53166-390-780 / 53166-422-000 / 53165-422-000

USD$ 12.55
Listed Models
Honda CBX1000 Starter Motor Seal
USD$ 2.95
Listed Models

Starter Motor Seal

#03-0780 | Honda CBX1000 (1979-1982)

Starter Motor Seal - Size 24.4 x 3.1, Replaces OEM# 91312-MG7-003 / 91309-300-000 / 91309-425-003

USD$ 2.95
Listed Models
Honda CBX1000 Starter Motor Seal
USD$ 3.75
Listed Models

Starter Motor Seal

#03-0784 | Honda CBX1000 (1979-1982)

Starter Motor Seal - 60 x 1.4 - Replaces OEM# 31206-286-158 / 31206-402-008

USD$ 3.75
Listed Models
Honda CBX1000 Headlight Case Collar
USD$ 3.35
Listed Models

Headlight Case Collar

#07-4644 | Honda CBX1000 (1979-1980)

Headlight Case Collar, Replaces OEM# 61302-300-000 This is the collar that goes in each side of the stock headlight case. Sold Each, order the quantity you require

USD$ 3.35
Listed Models
Honda CBX1000 Headlight Setting Collar
USD$ 2.90
Listed Models

Headlight Setting Collar

#07-4645 | Honda CBX1000 (1979-1980)

Headlight Setting Collar, Replaces OEM# 61304-292-000 Sold Each, order the quantity you require

USD$ 2.90
Listed Models
Honda CBX1000 Starter Relay Pigtail / Plug
USD$ 4.80
Listed Models

Starter Relay Pigtail / Plug

#11-2098 | Honda CBX1000 (1981-1982)

Starter Relay Pigtail / Plug Connects to our starter relays #24-2004, 24-2157 and 73-0824. Despite wire colors you must confirm wire orientation before hooking up!

USD$ 4.80
Listed Models
Honda CBX1000 Turn Signal Replacement Lens ~ Clear
USD$ 4.80
Listed Models

Turn Signal Replacement Lens ~ Clear

#11-2144 | Honda CBX1000 (1981-1982)

Turn Signal Replacement Lens - Clear - Front Or Rear OEM Ref # 33402-431-782

USD$ 4.80
Listed Models
Honda CBX1000 Turn Signal Replacement Lens ~ Smoked
USD$ 5.55
Listed Models

Turn Signal Replacement Lens ~ Smoked

#11-2151 | Honda CBX1000 (1981-1982)

Turn Signal Replacement Lens - Smoked - Front Or Rear OEM Ref # 33402-431-782

USD$ 5.55
Listed Models
Honda CBX1000 Carburetor Air Mixture Screw Kit
USD$ 3.75
Listed Models

Carburetor Air Mixture Screw Kit

#13-0012 | Honda CBX1000 (1980-1982)

Carburetor Air Mixture Screw Kit Set Includes 1 Mixture Screw, 1 Spring, 2 O-Rings. Order The Quantity of Sets you Require.

USD$ 3.75
Listed Models
Honda CBX1000 Drain Plug Crush Washer
USD$ 1.10
Listed Models

Drain Plug Crush Washer

#15-0006 | Honda CBX1000 (1979-1982)

Drain Plug Crush Washer 12mm x 18mm x 1mm

USD$ 1.10
Listed Models
Honda CBX1000 Oil Filter Washer - Each
USD$ 1.85
Listed Models

Oil Filter Washer - Each

#15-0042 | Honda CBX1000 (1979-1982), CBX1000 (1979-1982)

Oil Filter Washer - Each 30mm OD - 20.5mm ID - .5mm Thickness Replaces OEM# 15414-300-000 Sold Each, Order the Quantity you Require

USD$ 1.85
Listed Models
Honda CBX1000 Exhaust Gasket (Each)
USD$ 2.25
Listed Models

Exhaust Gasket (Each)

#17-2813 | Honda CBX1000 (1978-1982)

Exhaust Gasket - 1 Pc OEM Ref # 18212-634-000 / 18291-236-000 / 18291-MN4-920 Sold Each, Order the Quantity you Require

USD$ 2.25
Listed Models
Honda CBX1000 Complete Engine Gasket Set
USD$ 147.95
Listed Models

Complete Engine Gasket Set

#18-0095 | Honda CBX1000 (1979-1983)

Complete Engine Gasket Set

USD$ 147.95
Listed Models
Honda CBX1000 Steering Bearing Kit
USD$ 39.95
Listed Models

Steering Bearing Kit

#28-2006 | Honda CBX1000 (1980-1982)

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 39.95
Listed Models
Honda CBX1000 Steering Bearing Kit
USD$ 43.95
Listed Models

Steering Bearing Kit

#28-2013 | Honda CBX1000 (1979)

Tapered Roller Steering Bearing Conversion Kit. Superior to OEM quality, 10X the contact area and less flex. Designed as a drop in replacement for the original bearing. Kit is complete with upper and lower tapered bearing races. High quality made in Japan.

USD$ 43.95
Listed Models
Honda CBX1000 Front Wheel Bearing Retainer
USD$ 10.75
Listed Models

Front Wheel Bearing Retainer

#28-4016 | Honda CBX1000 (1979-1982)

Front Wheel Bearing Retainer - Replaces OEM# 44643-300-000

USD$ 10.75
Listed Models
Honda CBX1000 Rear Wheel Bearing
USD$ 13.95
Listed Models

Rear Wheel Bearing

#28-6305 | Honda CBX1000 (1980-1982)

Rear Wheel Bearing with 2 Synthetic Shields - 6305-2RS Size Replaces OEM# 96140-63050-10 High Quality Made in Japan

USD$ 13.95
Listed Models
Honda CBX1000 Rear Shock Swingarm Bushing
USD$ 3.90
Listed Models
Out of Stock
Email Me When Available

Rear Shock Swingarm Bushing

#28-6918 | Honda CBX1000 (1979-1980)

Rear Shock Swingarm Bushing, Replaces OEM# 40548-268-000 19mm Long, 22mm OD, 10mm ID. Sold Each, Order the Quantity you Require

USD$ 3.90
Listed Models
Out of Stock
Email Me When Available
Honda CBX1000 Engine Cover Bolt Set
USD$ 25.75
Listed Models

Engine Cover Bolt Set

#28-6945 | Honda CBX1000 (1979-1982)

High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 44 Bolts and 3 Allen keys for a total of 47 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.

USD$ 25.75
Listed Models
Honda CBX1000 Reservoir Cap & Diaphragm
USD$ 14.75
Listed Models

Reservoir Cap & Diaphragm

#29-0080 | Honda CBX1000 (1979-1982)

Reservoir Cap & Diaphragm Round Thread On Type OEM Ref # 43515-MJ6-006 / 45520-300-000

USD$ 14.75
Listed Models
Honda CBX1000 Cotter Valve / Valve Keeper
USD$ 1.65
Listed Models

Cotter Valve / Valve Keeper

#29-0083 | Honda CBX1000 (1979-1982)

Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require

USD$ 1.65
Listed Models
Honda CBX1000 Rear Sintered Metal Brake Pad Set
USD$ 17.70
Listed Models

Rear Sintered Metal Brake Pad Set

#29-3553b | Honda CBX1000 (1979-1980)

Rear Brake Pad Set - Sintered Metal - 67 x 49.5 x 9.5mm. OEM # 45105-410-305 / 45105-461-771 / 45105-461-772 / 45105-438-004 / 45105-438-007 / 45105-438-008

USD$ 17.70
Listed Models
Honda CBX1000 Brake Rod Pin
USD$ 4.50
Listed Models

Brake Rod Pin

#29-7031A | Honda CBX1000 (1979-1982)

Brake Rod Pin, Replaces OEM# 46503-371-000

USD$ 4.50
Listed Models
Honda CBX1000 Rear Brake Disc Rotor
USD$ 207.00
Listed Models

Rear Brake Disc Rotor

#30-3058 | Honda CBX1000 (1980-1981)

Rear Brake Disc Rotor, Replaces OEM# 43121-422-000

USD$ 207.00
Listed Models
Honda CBX1000 Rear Wheel Bearing Retainer
USD$ 21.95
Listed Models

Rear Wheel Bearing Retainer

#73-1068 | Honda CBX1000 (1980-1982)

Rear Wheel Bearing Retainer - Brake Disc Side - Replaces OEM# 41231-286-000

USD$ 21.95
Listed Models
Honda CBX1000 Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
USD$ 29.55
Listed Models

Custom Performance Magnetic Oil Drain Plug ~ Joker Machine

#73-1074 | Honda CBX1000 (1979-1982)

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

USD$ 29.55
Listed Models
Honda CBX1000 Rear Sprocket ~ 42 Tooth
USD$ 24.95
Listed Models

Rear Sprocket ~ 42 Tooth

#99-4806 | Honda CBX1000 (1981-1982)

Rear Sprocket ~ 42 Tooth Replaces OEM# 41200-MZ2-890 / 41200-MG5-670 / 41200-MS2-000 / 41200-MA2-000 / 41200-MC8-670. Stock Size Please Count your sprocket teeth and check your chain length before ordering to ensure this is correct for your bike

USD$ 24.95
Listed Models
Honda CBX1000 Front Reflector
USD$ 5.55
Listed Models

Front Reflector

#99-4943 | Honda CBX1000 (1979-1982)

Front Reflector, Replaces OEM# 33742-HB9-641 / 33741-413-003 / 33741-413-013 Amber Reflector with Black Plastic Ring. 2 Segments in the Reflector (Instead of 6 Like the OEM).

USD$ 5.55
Listed Models
Honda CBX1000 Headlight Reflector Rubber Base
USD$ 11.45
Listed Models

Headlight Reflector Rubber Base

#99-4979 | Honda CBX1000 (1981-1982)

Headlight Reflector Rubber Base, Replaces OEM# 33743-425-600 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require

USD$ 11.45
Listed Models
Honda CBX1000 Handmade Christmas Stocking
USD$ 44.95

Handmade Christmas Stocking

#00-0007

HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Rags”. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.

USD$ 44.95
Honda CBX1000 Universal Glas-Pak Insert
SALE: USD$ 12.00
(USD$ 19.95)

Universal Glas-Pak Insert

#009-0317

Universal Glas-Pak Insert - Fits 1 1/2" Pipes - Glass Pak's Actual Size 1 3/8" Tone down your TT or Drag Pipes

SALE: USD$ 12.00
(USD$ 19.95)
Honda CBX1000 Tire Valve Stem
USD$ 3.65

Tire Valve Stem

#01-0166

Tire Valve Stem - Straight Metal Type

USD$ 3.65
Honda CBX1000 Tire Valve Stem
USD$ 1.45

Tire Valve Stem

#01-0167

Tire Valve Stem - Straight Rubber Type

USD$ 1.45
Honda CBX1000 Tire Valve Stem
USD$ 2.60

Tire Valve Stem

#01-0168

Tire Valve Stem Metal Type

USD$ 2.60
Honda CBX1000 Tire Valve Stem
USD$ 2.90

Tire Valve Stem

#01-0169

Tire Valve Stem - 90 Degree Metal Type

USD$ 2.90
Honda CBX1000 Tire Valve Stem Caps
USD$ 5.90

Tire Valve Stem Caps

#01-0170

Tire Valve Stem Caps - Pk/10 Metal Caps with Core Removal Notch Built In

USD$ 5.90
Honda CBX1000 Tire Valve Stem Caps
USD$ 1.45

Tire Valve Stem Caps

#01-0171

Tire Valve Stem Caps - Pk/2 Metal Caps with Core Removal Notch

USD$ 1.45
Honda CBX1000 Tire Fill Valve
USD$ 3.65

Tire Fill Valve

#01-0173

Ninety Degree Tire Fill Valve

USD$ 3.65
Honda CBX1000 Rivet Link
USD$ 2.20

Rivet Link

#01-8801

Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains

USD$ 2.20
Honda CBX1000 Rivet Link
USD$ 3.35

Rivet Link

#01-8802

Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains

USD$ 3.35
Honda CBX1000 Rivet Link
USD$ 2.90

Rivet Link

#01-8803

Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains

USD$ 2.90
Honda CBX1000 Clip Link
USD$ 2.20

Clip Link

#01-8813

Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains

USD$ 2.20
Honda CBX1000 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8814

Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI

USD$ 2.90
Honda CBX1000 Cam Chain Rivet Link
USD$ 2.20

Cam Chain Rivet Link

#01-8815

Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI

USD$ 2.20
Honda CBX1000 Cam Chain Rivet Link
USD$ 2.90

Cam Chain Rivet Link

#01-8816

Cam Chain Rivet Link Fits 82RH2015

USD$ 2.90
Honda CBX1000 Custom Micro Push Button/Kill Switch
USD$ 15.50

Custom Micro Push Button/Kill Switch

#01-9924

Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.

USD$ 15.50
Honda CBX1000 Push/Pull Style Throttle Assembly
USD$ 17.00

Push/Pull Style Throttle Assembly

#02-1222

Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.

USD$ 17.00
Honda CBX1000 Heated Grips
SALE: USD$ 34.95
(USD$ 36.95)

Heated Grips

#02-1231

Heated Grip Set/2 for 7/8" HANDLEBARS ONLY. Warms up when the engine is running. Features a high/low/off switch. Easy to use relay protected sealed controls. Rubber resistant to low temperatures and resists cracking. Easy install with no gluing needed. 130mm Length

SALE: USD$ 34.95
(USD$ 36.95)
Honda CBX1000 Classic Coke Bottle Grips
USD$ 8.10

Classic Coke Bottle Grips

#02-2399

Classic Coke Bottle Grip Set - Black - 130mm Length - Closed End - for 7/8" bars.

USD$ 8.10
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.