Honda ► CL360 ►
-
Here’s our hand-picked list of parts and accessories for your Honda CL360 with universal parts included that match “1”►
- Honda
Front Master Cylinder w Remote Reservoir - 14mm
Universal Front Brake Master Cylinder with a Remote Reservoir 14mm Piston Diameter Low Profile Design With 10 x 1.25 Threaded Outlet Comes With: Alloy Body, Adjustable Lever, Banjo Bolt Washers, Banjo Bolt.
Front Brake Master Cylinder
Universal Front Brake Master Cylinder 13mm Piston Diameter Low Profile Design With 10 x 1.25 Threaded Outlet Comes With: Alloy Body, Alloy Lever, Brake Switch, Banjo Bolt Washers, Banjo Bolt.
Chrome Goldwing Emblem Set/2
Chrome 3D Goldwing Emblem Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Gold Goldwing Emblem Set/2
Gold 3D Goldwing Emblem/Decal Set/2. Features a Sticker Back for Easy Application. These Custom Emblems Can Be Used Anywhere! 16.5cm Long x 1cm Width x 0.40cm Thickness
Classic Round Black Taillight
Classic Round Black Taillight with plate bracket. 2 1/4" Round lens (with a clear bottom to light up your plates), 12 Volt double filament bulb. Works as a running and brake light.
Napoleon Type Mirrors
Napoleon Type Mirrors Pk/2 - Universal Fit 5 1/8" x 3 5/16" Mirror Surface 10mm Thread - Matte Black Fits Right & Left
GP Sports Mirror Set
GP Sports Mirror Set/2 - Universal Fit - Right & Left Black, 10mm Thread. 4 1/4" x 3 5/16" Mirror Surface. Shock resistant. Wide Angle joint for easy setting.
GP Sports Mirror Set - For Yamaha
GP Sports Mirror Set - Universal Fit - Right & Left For Yamaha Black, 10mm Thread. 4 1/4" x 3 5/16" Mirror Surface. Shock resistant. Wide Angle joint for easy setting.
Replacement Mirror
Replacement Mirror - Fits Left & Right Side - Short Stem type Kawasaki Z-1 Style 4 3/8" Round Mirror With Oval Back 10mm Screw Mount. Short Stem
Universal Fuel Petcock Adaptor Nut
Universal Fuel Petcock Adaptor Nut (22mm) - Fits M22 x 1.0 7/8" or 22mm Dia Thread Male Tank Bung to 3/8" NPT
Universal Fuel Petcock Adaptor Nut
Universal Fuel Petcock Adaptor Nut (24mm) - Fits M24 x 1.0 15/16" or 24mm Dia Thread Male Tank Bung to 3/8" NPT
Hydraulic Brake Light Switch
Hydraulic Brake Light Switch Banjo Bolt Type - 10mm x M1.25 Can Be Used Front/Rear At Single Banjo Brake Line Fitting Correct Thread For Most Honda/Kawasaki/Yamaha Stock Fittings
Flywheel Puller
Flywheel Puller 22mm x 1.5 Right Hand Thread Internal Thread Flywheels & Rotors Honda - XL250, XL350, XL600, XR600R, XR250, XR350, XR500
Hose Remover Pliers
Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.
Screw Extractor Set
Screw Extractor Set 5 Pc Set 1/8", 3/16", 15/64", 5/16", 3/8" Used to remove broken off studs, bolts & screws.
Deep Allen Socket Driver Set
Deep Allen Socket Driver Set 8 Pc Set - 140mm Bits Includes 1/2" Drive, Socket Sizes - 5, 6, 7, 8, 10, 12, 14 & 17mm
Metric Pin Punch Set
Metric Pin Punch Set 8 Pc Set Includes 1.5mm, 2mm, 3mm, 4mm, 5mm, 5.5mm, 6mm & 8mm
Carb Cleaning Tool Set
Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.
Push/Pull Style Throttle Assembly
Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.
Rear Brake Master Cylinder 13mm Piston
Universal/Custom Rear Brake Master Cylinder for Custom or Race Use 13mm Bore - Alloy body with remote fluid reservoir & hose. M10 x 1.25 threaded outlet, adjustable clevis. Has 2X 8mm threaded mounting holes at 49mm center to center. Check that this 49mm size will work to mount on your bike before purchasing. Includes 10mm x 1.25 outlet banjo bolt.
LED Taillight
Custom LED Taillight. Small and lightweight, this cool little LED taillight includes a swiveling mounting bracket with about 100 degrees of up or down adjustment making it ideal for many custom applications. Featuring a clear lens with 8 super bright red LED's for the taillight and brake light as well as 5 clear LED's for the license plate illumination. Machined from aluminum in anodized black. Not DOT approved. Dimensions are approximately 1-7/8" wide x 1-3/4" deep.
HandleBar
HandleBar Daytona Tour Type Chrome Bar Diameter - 7/8" - 22mm, Length - 29 1/4 - 743mm, Pull Back - 4" - 100mm, Inner Rise - 4" - 100mm, End Rise - 6 1/4" - 158mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Z Handlebar - Chrome Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
Handlebar
Z Handlebar - Satin Black Bar Diameter - 7/8" - 22mm Length - 24 1/2" - 622mm Pull Back - 3 3/4" - 95mm Inner Rise - 6" - 152mm End Rise - 5 3/4" - 146mm Center Width - 6" - 152mm Base Width - 8" - 203mm Control Length - 8 1/2" - 216mm Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Yamaha Special Bar Bar Diameter - 7/8" - 22mm, Length - 29" - 736mm, Pull Back - 12" - 305mm, Inner Rise - 7 3/4" - 197mm, End Ride - 6" - 152mm, Center Width - 7 1/2" - 190mm, Base Width - 11" - 280mm, Knurl Width - 4 1/2" - 115mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar - CB 750 Special Bar Bar Thickness - 7/8" - 22mm, Length - 31" - 787mm, Pull Back - 6 1/2" - 165mm, Inner Rise - 6 1/4" - 158mm, End Rise - 5" - 127mm, Center Width - 7" - 178mm, Base Width - 10" - 254mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8" - 203mm, Drilled - NO Note: Not Drilled for wires
Portable Auxiliary Fuel Tank Tool
Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.
Gold Bullet Shaped License Plate Bolt
Gold Colored Bullet Shaped Bolt with Nut and Washer. These bullet shaped bolts are made from cast aluminum. The Bullet is 3/4" tall with a 3/4" round base. The 3/4" long x 1/4"-20 threaded stud is removable. There are many uses for these bolts including license plate holder bolts and more! They can be mounted to about anything using 1/4"-20 bolts or screws to hold the bullets in place. Note: Sold Each, Order the Quantity you Require
Chrome Bullet Shaped License Plate Bolt
Chrome Bullet Shaped Bolt with Nut and Washer. These bullet shaped bolts are made from cast aluminum. The Bullet is 3/4" tall with a 3/4" round base. The 3/4" long x 1/4"-20 threaded stud is removable. There are many uses for these bolts including license plate holder bolts and more! They can be mounted to about anything using 1/4"-20 bolts or screws to hold the bullets in place. Note: Sold Each, Order the Quantity you Require
LED Taillight
Custom LED Taillight with Fender Mount for License Plate. Small and lightweight, this cool little LED taillight includes a swiveling mounting bracket with about 100 degrees of adjustment making it ideal for many custom applications. Featuring a clear lens with 8 super bright red LED's for the taillight and brake light as well as 5 clear LED's for the license plate illumination. Machined from aluminum in anodized black. Not DOT approved. Dimensions are approx 1 7/8" wide x 1 3/4" deep.
Handlebar - Black
Clubman/Cafe Bar - Black Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
Handlebar
Clubman/Cafe Bar - Chrome Bar Diameter - 7/8" - 22mm, Length - 28" - 711mm, Pull Back - 2" - 50mm, End Rise - 4 7/8" - 124mm, Center Width - 7" - 178mm, Base Width - 10 1/2" - 266mm, Knurl Width - 4 3/4" - 120mm, Control Length - 8 1/2" - 216mm, Drilled - NO Note: Not Drilled for wires This bar can be used in the regular upright position or the cafe perspective and looks great either way!
Mini Speedometer (MPH) ~ Black Face Plate
Mini Speedo (MPH) Black Face Plate Dial Scale: 0-140MPH Mechanical Drive Ratio: 2:1 60MPH=2240RPM 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
Mini Speedometer (MPH) ~ White Face Plate
Mini Speedo (MPH) White Face Plate Dial Scale: 0-140MPH Mechanical Drive Ratio: 2:1 60MPH=2240RPM 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
Mini Speedometer (MPH) ~ All Black
Mini Speedo (MPH) Black Face Plate, Black Body Dial Scale: 0-140MPH Mechanical Drive Ratio: 2:1 60MPH=2240RPM 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
Mini Tachometer ~ All Black
Mini Tachometer Black Face Plate, Black Body Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 2.25" (60mm) Diameter Bulb Type Illumination Suitable For Suzuki, Honda 750-1000cc
Shock Absorber Set (290mm) ~ All Black
Shock Absorber Set/2 - All Black 292mm (11 1/2") Eye to Eye 4 Position Spring Preload Adjustment Progressive Wound Heavy Duty Springs Comes With Bushings, Inserts, Washers & Spring Preload Wrench Universal Fit - Please be sure to measure your current shocks, and determine what style you need.
Shock Absorber Set (290mm)
Shock Absorber Set/2 290mm (11 1/2") Eye to Eye 4 Position Spring Preload Adjustment Progressive Wound Heavy Duty Springs Comes With Bushings, Inserts, Washers & Spring Preload Wrench Universal Fit - Please be sure to measure your current shocks, and determine what style you need.
Universal Front Brake Master Cylinder
Universal Front Brake Master Cylinder (13mm) Alloy body master cylinder assembly. Includes lever, banjo bolt, banjo washers and brake switch. Quality low profile design with 10 x 1.25 front threaded outlet. Left hand thread mirror mount. Recommended for Single disk systems.
Clutch Master Cylinder Assembly
Clutch Master Cylinder with 12.9mm Piston Diameter - Comes With: Alloy Body, Alloy Lever, Banjo Bolt Washers, Banjo Bolt and brake/clutch switch. Quality low profile design with a 10 x 1.25 Front threaded outlet.
Front Brake Master Cylinder
Universal Front Brake Master Cylinder 16mm Piston Diameter - For Dual Disk Brakes Low Profile Design With 10 x 1.25 Front Threaded Outlet Left Hand Thread Mirror Mount Comes With: Alloy Body, Alloy Lever, Brake Switch, Banjo Bolt Washers, Banjo Bolt.
Handlebar - Black
Drag Bar - Gloss Black Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Chrome
Drag Bar - Chrome Bar Diameter - 1" - 25.4mm, Length - 31" - 787mm, Pull Back - 4" - 102mm, Center Width - 9" - 228mm, Control Length - 10" - 254mm, Drilled - NO Note: Not Drilled for wires
Black Tie Downs w/ Assist Carabiner
Black Heavy Duty Cam Buckle Tie Down (Set/2) w/ Assist Carabiner. Features a 3/8" diameter rubber coated hook, 1" wide straps with a length of 5.6 feet, non slip cam buckles with vinyl coating to protect chrome and paint. 1200lb Strength.
Flywheel Puller
Flywheel Puller 27mm x 1.0 Left Hand Thread Internal Thread Flywheels & Rotors Honda - CR80R, CR125R, CR250R, CR450R, CR500R. Many Kaw/Suz/Yam
Flywheel Puller
Flywheel Puller 20mm x 1.5 Right Hand Thread Internal Thread Flywheels & Rotors Honda - CB750 Four 69-78 SOHC Models, Suzuki - GSX-R600V, GSX-R750 T/V
Flywheel Puller
Flywheel Puller 18mm x 1.5 Right Hand Thread ( Hollow Center) Internal Thread Flywheels & Rotors Honda - 4 Cyl. Street 4-Valve Per Cylinder Engines CB750K, CB900C, CB1000 78 & Later
Piston Pin Puller
Piston Pin Puller Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Image Scope
Professional Flexible Fiber Optic Image Scope for inspecting engine internal parts. 18" long wand with a 6mm (1/4") OD tip. Image resolution is 7,400 pixels. Packed in a blow mold case with handle jacket and extra Xenon Bulbs and 2 AA batteries.
Goldwing GL Logo Decal Set/2 ~ Black
Goldwing GL Logo Decal Set/2 ~ Black This quality set of 2 matching decals looks awesome on anything - helmets, fuel tanks, wheels, fairings, motorcycle gear or in a man cave! Each decal logo measures 8" long and 1.25" high.