Honda ► GL1000 ►
-
Here’s our hand-picked list of electrical parts for your Honda GL1000 that match “honda sl125”►
- Honda
![Honda GL1000 Stock Type Battery Band](/images/parts/100/99-4991.jpg)
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-15001 Band Overall Size: 5.25" (133mm) Measuring from the inside of the brackets.
![Honda GL1000 Stock Type Reflector](/images/parts/100/11-2303.jpg)
Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670
![Honda GL1000 Stop Light Switch](/images/parts/100/12-0008.jpg)
Stop Light Switch
Rear Stop Light Switch OEM Ref # 35350-292-003 / 35350-KJ9-405
![Honda GL1000 7" Halogen Lamp Conversion Kit](/images/parts/100/09-0072.jpg)
7" Halogen Lamp Conversion Kit
7" Halogen Lamp with 60/55 watt H4 P43T Halogen Bulb and parking light. E-Mark certified for RH drive European Market use (can also be used in North America). Replaces stock sealed beam and fits into stock retainer. Fits: All Honda CB750's (1969-78)
![Honda GL1000 Wire Harness](/images/parts/100/73-0925.jpg)
Wire Harness
Main Wire Harness Loom - OEM Ref # 32100-371-670 NOTE: These fit model year and type listed, other years and types of GL's use a different OEM part number (there is a difference!).
![Honda GL1000 Front Stop Switch](/images/parts/100/12-0010.jpg)
Front Stop Switch
Front Stop Switch & Safety Starter Switch OEM Ref # 35340-329-003 / 35340-102-003 / 35340-401-682 / 35340-329-000 / 35340-086-721
![Honda GL1000 Radiator Fan Cooling Switch O-Ring](/images/parts/100/03-0781.jpg)
Radiator Fan Cooling Switch O-Ring
Radiator Fan Cooling Switch O-Ring, Replaces OEM# 91307-PH9-000
![Honda GL1000 Dynatek Dyna S Ignition System (Ultimate Kit)](/images/parts/100/07-9981.jpg)
Dynatek Dyna S Ignition System (Ultimate Kit)
Dynatek Dyna S Ignition System (Ultimate Kit) with 2X Dynatek Brand Performance 3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
![Honda GL1000 Dynatek Dyna S Ignition System (Premium Kit)](/images/parts/100/07-9982.jpg)
Dynatek Dyna S Ignition System (Premium Kit)
Dynatek Dyna S Ignition System (Premium Kit) with 2X Aftermarket Generic Performance 3.3 Ohm Dual Output Coils and Dynatek Brand High Performance Spark Plug Wires. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. Includes instructions and comes with a one year warranty through Dynatek.
![Honda GL1000 Dynatek Dyna S Ignition System](/images/parts/100/07-9983.jpg)
Dynatek Dyna S Ignition System
Dynatek Dyna S Ignition System. The Dyna S is a complete self-contained electronic ignition system built with the latest state-of-the-art engineering. This is the same ignition used by top racers over the past 2 decades. The Dyna S is completely housed behind the ignition cover and uses a magnetic rotor with the original spark advancer, so the factory advance curve is maintained. Increases power and reduces vibration, backfiring and intake reversion, especially on engines with radical cam timing. Front and rear cylinder timing may be set individually. Perfect for hot dual-plugged engines. The Dyna S ignition is a time proven solution to the basic ignition and trigger needs of the modern motorcycle. The Dyna S is the standard of performance and reliability. Very high quality made in the USA. This ignition can be used with your stock coils or any other coils 3 ohms or higher. Includes instructions and comes with a one year warranty through Dynatek.
![Honda GL1000 Electronic Ignition System](/images/parts/100/12-0129.jpg)
Electronic Ignition System
Electronic Ignition System. Direct plug-in fitment. Increase RPM 100% tested before shipment, high reliability and high performance!
![Honda GL1000 Contact Point ~ Right Side](/images/parts/100/14-0007.jpg)
Contact Point ~ Right Side
Contact Point ~ Right Side - Replaces OEM# 30203-292-003 / 30203-292-154
![Honda GL1000 Tail Light / Brake Light Harness](/images/parts/100/99-4981.jpg)
Tail Light / Brake Light Harness
Tail Light / Brake Light Harness, Replaces OEM# 33711-371-000
![Honda GL1000 Stop Switch / Rear Brake Light Spring](/images/parts/100/99-4989.jpg)
Stop Switch / Rear Brake Light Spring
Stop Switch / Rear Brake Light Spring, Replaces OEM# 35357-046-000. This is the spring that connects the rear brake light switch to the brake pedal.
![Honda GL1000 Lens Screw](/images/parts/100/49-0145.jpg)
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
![Honda GL1000 Rick's Electrics - OEM Style Rectifier Regulator](/images/parts/100/24-6000.jpg)
Rick's Electrics - OEM Style Rectifier Regulator
Rick's Electrics Brand OEM Style Rectifier / Regular.
![Honda GL1000 Rick's Electrics - Performance Style Rectifier Regulator](/images/parts/100/24-6001.jpg)
Rick's Electrics - Performance Style Rectifier Regulator
Rick's Electrics Brand Hot Shot Performance Style Rectifier / Regular. Specially designed for optimal performance and a cooler running rectifier regulator.
![Honda GL1000 Rick's Electrics - Lithium Ion Battery Compatible Rectifier Regulator](/images/parts/100/24-6002.jpg)
Rick's Electrics - Lithium Ion Battery Compatible Rectifier Regulator
Rick's Electrics Brand Lithium Ion Battery Compatible Style Rectifier / Regulator. Designed with a lower voltage set point (As used in Lithium Ion Batteries). Instructions included. Not for use with standard lead acid batteries.
![Honda GL1000 Fuse Box Assembly](/images/parts/100/99-4858.jpg)
Fuse Box Assembly
Fuse Box Assembly with Fuses, Replaces OEM# 38200-371-153. Includes 3 Extra Fuses in the Cover.
![Honda GL1000 Headlamp Rim](/images/parts/100/09-0066.jpg)
Headlamp Rim
Headlamp Rim - Chrome - Replaces OEM # 33101-300-673 / 33101-405-671
![Honda GL1000 Starter Solenoid Relay](/images/parts/100/09-6582.jpg)
Starter Solenoid Relay
Starter Solenoid Relay, Replaces OEM# 35850-371-670 / 35850-306/670 / 35850-HA7-670
![Honda GL1000 Radiator Fan Cooling Switch](/images/parts/100/73-0862.jpg)
Radiator Fan Cooling Switch
Radiator Fan Cooling Switch, Replaces OEM # 37760-MB9-000
![Honda GL1000 Starter Clutch Diode/Rectifier](/images/parts/100/73-0857.jpg)
Starter Clutch Diode/Rectifier
Starter Clutch Diode/ Rectifier, Replaces OEM # 31710-371-008
![Honda GL1000 Headlight Reflector Rubber Base](/images/parts/100/99-4976.jpg)
Headlight Reflector Rubber Base
Headlight Reflector Rubber Base, Replaces OEM# 33743-375-000 This is the rubber base that the headlight reflector attaches to. Sold Each, order the quantity you require