Honda ► GL1000L ►
-
Here’s our hand-picked list of universal parts and accessories►
- Honda
![Honda GL1000L Universal Fuel Petcock Adaptor Plate](/images/parts/100/20-0101.jpg)
Universal Fuel Petcock Adaptor Plate
Universal Fuel Petcock Adaptor Plate (34mm) 3/8" NPT Adaptor Plate With 34mm Center-Center Holes
![Honda GL1000L Universal Fuel Petcock Adaptor Plate](/images/parts/100/20-0102.jpg)
Universal Fuel Petcock Adaptor Plate
Universal Fuel Petcock Adaptor Plate (44mm) 3/8" NPT Adaptor Plate With 44mm Center-Center Holes
![Honda GL1000L Universal Fuel Petcock Adaptor Plate](/images/parts/100/20-0103.jpg)
Universal Fuel Petcock Adaptor Plate
Universal Fuel Petcock Adaptor Plate (46mm) 3/8" NPT Adaptor Plate With 46mm Center-Center Holes
![Honda GL1000L Universal Fuel Petcock](/images/parts/100/20-0100.jpg)
Universal Fuel Petcock
Universal Fuel Petcock On/Off/Reserve Positions One straight Outlet Fitting, Two ninety degree outlet fittings & One outlet blockoff plug included. Direct fit to 3/8" NPT (Female Thread) in tank or choose adaptor plate or Nut as required.
![Honda GL1000L Universal Fuel Petcock Adaptor Nut](/images/parts/100/20-0105.jpg)
Universal Fuel Petcock Adaptor Nut
Universal Fuel Petcock Adaptor Nut (22mm) - Fits M22 x 1.0 7/8" or 22mm Dia Thread Male Tank Bung to 3/8" NPT
![Honda GL1000L Universal Fuel Petcock Adaptor Nut](/images/parts/100/20-0106.jpg)
Universal Fuel Petcock Adaptor Nut
Universal Fuel Petcock Adaptor Nut (24mm) - Fits M24 x 1.0 15/16" or 24mm Dia Thread Male Tank Bung to 3/8" NPT
![Honda GL1000L Cast Aluminum Black Headlight Bracket Set](/images/parts/100/09-0021.jpg)
Cast Aluminum Black Headlight Bracket Set
Cast Aluminum Black Headlamp Mounting Bracket Set. Sold with adapters to fit 35mm, 39mm and 41mm fork tube outer diameters.
![Honda GL1000L Valve Spring Compressor](/images/parts/100/35-0115.jpg)
Valve Spring Compressor
Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.
![Honda GL1000L Steering Bearing Installation Tool](/images/parts/100/35-0073.jpg)
Steering Bearing Installation Tool
Steering Bearing Installation Tool. Includes one driver and three aluminum adapters. Unique system utilizes specially designed aluminum adaptors to quickly and accurately install nearly any lower bearing. Use with a soft faced hammer.
![Honda GL1000L Mini Tachometer ~ Black Face Plate](/images/parts/100/03-0722.jpg)
Mini Tachometer ~ Black Face Plate
Mini Tachometer Black Face Plate Dial Scale: 0-12,000RPM 5:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Kawasaki Or Yamaha
![Honda GL1000L Mini Speedometer (KPH) ~ Black Face Plate](/images/parts/100/03-0724.jpg)
Mini Speedometer (KPH) ~ Black Face Plate
Mini Speedo (KPH) Black Face Plate Dial Scale: 0-220KPH 100KPH=2330RPM Mechanical Drive 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
![Honda GL1000L Mini Speedometer (MPH) ~ Black Face Plate](/images/parts/100/03-0725.jpg)
Mini Speedometer (MPH) ~ Black Face Plate
Mini Speedo (MPH) Black Face Plate Dial Scale: 0-140MPH Mechanical Drive Ratio: 2:1 60MPH=2240RPM 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
![Honda GL1000L Mini Speedometer (MPH) ~ White Face Plate](/images/parts/100/03-0744.jpg)
Mini Speedometer (MPH) ~ White Face Plate
Mini Speedo (MPH) White Face Plate Dial Scale: 0-140MPH Mechanical Drive Ratio: 2:1 60MPH=2240RPM 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
![Honda GL1000L Mini Tachometer ~ White Face Plate](/images/parts/100/03-0745.jpg)
Mini Tachometer ~ White Face Plate
Mini Tachometer White Face Plate Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Suzuki, Honda 750-1000cc
![Honda GL1000L Mini Speedometer (KPH) ~ White Face Plate](/images/parts/100/03-0746.jpg)
Mini Speedometer (KPH) ~ White Face Plate
Mini Speedo (KPH) White Face Plate Dial Scale: 0-220KPH 100KPH=2330RPM Mechanical Drive 2.25" (60mm) Diameter LED Illumination High Beam / Neutral / Oil Pressure / Turn Indicator Lights
![Honda GL1000L Mini Tachometer ~ White Face Plate](/images/parts/100/03-0748.jpg)
Mini Tachometer ~ White Face Plate
Mini Tachometer White Face Plate Dial Scale: 0-12,000RPM 5:1 Ratio Mechanical Drive 2.25" (60mm) Diameter LED Illumination Suitable For Kawasaki Or Yamaha
![Honda GL1000L Mini Speedometer (MPH) ~ White Face Plate](/images/parts/100/03-0751.jpg)
Mini Speedometer (MPH) ~ White Face Plate
Mini Speedo (MPH) Dial Scale: 0-140MPH 60MPH=2240 RPM Mechanical Drive 1.9" (48mm) Diameter LED Illumination
![Honda GL1000L Mini Tachometer ~ Black Face Plate](/images/parts/100/03-0764.jpg)
Mini Tachometer ~ Black Face Plate
Mini Tachometer - Black Face Dial Scale: 0-12,000RPM 4:1 Ratio Mechanical Drive 1.9" (48mm) Diameter LED Illumination Suitable For Suzuki & Honda 750-1000cc
![Honda GL1000L Mini Speedometer (MPH) ~ Black Face Plate](/images/parts/100/03-0765.jpg)
Mini Speedometer (MPH) ~ Black Face Plate
Mini Speedo (MPH) Dial Scale: 0-140MPH 60MPH=2240 RPM Mechanical Drive 1.9" (48mm) Diameter LED Illumination
![Honda GL1000L Mini Tachometer ~ Black Face Plate](/images/parts/100/03-0767.jpg)
Mini Tachometer ~ Black Face Plate
Mini Tachometer Black Face Plate 4:1 Ratio 0-12,000RPM LED Lighting Suitable For Honda 750-1000cc Mechanical Driven
![Honda GL1000L Gold Bullet Shaped License Plate Bolt](/images/parts/100/49-0105.jpg)
Gold Bullet Shaped License Plate Bolt
Gold Colored Bullet Shaped Bolt with Nut and Washer. These bullet shaped bolts are made from cast aluminum. The Bullet is 3/4" tall with a 3/4" round base. The 3/4" long x 1/4"-20 threaded stud is removable. There are many uses for these bolts including license plate holder bolts and more! They can be mounted to about anything using 1/4"-20 bolts or screws to hold the bullets in place. Note: Sold Each, Order the Quantity you Require
![Honda GL1000L Carbon USA License Plate Frame](/images/parts/100/49-0245.jpg)
Carbon USA License Plate Frame
Carbon Looking (Metal Frame) Motorcycle License Plate Frame. This Frame is for Standard USA Motorcycle License Plates. 7.25" OD x 4.2" Height. Hardware must be purchased separately.
![Honda GL1000L Chrome USA License Plate Flame](/images/parts/100/73-0087.jpg)
Chrome USA License Plate Flame
Chrome Motorcycle License Plate Frame. This Frame is for Standard USA Motorcycle License Plates. 7.25" OD x 4.2" Height. Hardware must be purchased separately.
![Honda GL1000L Matte Black USA License Plate Frame](/images/parts/100/73-0088.jpg)
Matte Black USA License Plate Frame
Matte Black Motorcycle License Plate Frame. This Frame is for Standard USA Motorcycle License Plates. 7.25" OD x 4.2" Height. Hardware must be purchased separately.
![Honda GL1000L Chrome Bullet Shaped License Plate Bolt](/images/parts/100/73-0089.jpg)
Chrome Bullet Shaped License Plate Bolt
Chrome Bullet Shaped Bolt with Nut and Washer. These bullet shaped bolts are made from cast aluminum. The Bullet is 3/4" tall with a 3/4" round base. The 3/4" long x 1/4"-20 threaded stud is removable. There are many uses for these bolts including license plate holder bolts and more! They can be mounted to about anything using 1/4"-20 bolts or screws to hold the bullets in place. Note: Sold Each, Order the Quantity you Require
![Honda GL1000L Universal Bar Switch Assembly ~ Left (Clutch) Side](/images/parts/100/17-6911.jpg)
Universal Bar Switch Assembly ~ Left (Clutch) Side
Universal Bar Switch Assembly ~ Left (Clutch) Side. Clutch side universal handlebar switch for 7/8" bars. Simple and clean design with the essentials. Includes headlight hi-low, turn signal and horn buttons. Includes 8 female bullet connectors, you may need to adapt the connectors to fit your wire harness.
![Honda GL1000L Universal Bar Switch Assembly ~ Right (Brake) Side](/images/parts/100/17-6912.jpg)
Universal Bar Switch Assembly ~ Right (Brake) Side
Universal Bar Switch Assembly ~ Right (Brake) Side. Brake side universal handlebar switch for 7/8" bars. Simple and clean design with the essentials. Includes momentary starter, kill and on/off headlight buttons. Includes 9 female bullet connectors, you may need to adapt the connectors to fit your wire harness.
![Honda GL1000L Short Stem Air Glide Mirror Set](/images/parts/100/16-3064.jpg)
Short Stem Air Glide Mirror Set
Short Stem Chrome Billet Aluminum Oval Air Glide Mirror Set. left hand thread adapter included for Yamaha right-side perch. These mirrors will fit most Honda, Kawasaki, Suzuki & Yamaha's with a 10mm mounting hole. 10mm thread, Stem 6.1" total length, Mirror 5 1/8" wide, 2 5/8" tall, 5/8" deep.
![Honda GL1000L Long Stem Air Glide Mirror Set](/images/parts/100/16-3065.jpg)
Long Stem Air Glide Mirror Set
Long Stem Chrome Billet Aluminum Oval Air Glide Mirror Set. left hand thread adapter included for Yamaha right-side perch. These mirrors will fit most Honda, Kawasaki, Suzuki & Yamaha's with a 10mm mounting hole. 10mm thread, Stem 6.9" total length, Mirror 5 1/8" wide, 2 5/8" tall, 5/8" deep.
![Honda GL1000L Micro Custom Speedometer-KPH ~ Black Face Plate](/images/parts/100/03-0779.jpg)
Micro Custom Speedometer-KPH ~ Black Face Plate
Micro (1.9") Chromed Custom Type Kilometers Per Hour (KM/H) Speedometer with Black face plate. Includes LED illumination and mounting plate, requires mounting brackets (03-0740, 03-0741, 03-0762 or 03-0763) to mount to handlebars. Face dial ranges from 0-220KM/H. The ratio of this Speedometer is 60MPH=2240 RPM. Note: These are not stock type replacement speedometers, Please ensure this is the correct ratio for your bike.
![Honda GL1000L Red Reflective License Plate Bolts (Pk/2)](/images/parts/100/49-0238.jpg)
Red Reflective License Plate Bolts (Pk/2)
Red Reflective License Plate Bolts (Pk/2). Bolts include springs and wing nuts. 1" round outer diameter, 3/4" long mounting stud. Spring tension keeps them from coming loose. Do not over tighten as it will pull the back out or pop the lens off, order 2 Packs of 2 for a full set of 4.
![Honda GL1000L Chrome Upswept Muffler Extension Set](/images/parts/100/07-4637.jpg)
Chrome Upswept Muffler Extension Set
Chrome upswept muffler Extension Set. These are made specifically for Triumphs but they're perfect for adapting any straight mufflers to upswept mufflers. Check the dimensions to see if they'll work on your project. Constructed of 18 gauge chromed steel and slips on stock header pipes to allow mufflers with 1 1/2" to be easily mounted. Adapters allow mounting of "classic" Triumph TR6/T120 63-70 mufflers on Hinkley Bonneville models for a classic look. Sold as a set of 2. Dimensions: Total Length = 7" Short Side = 1 1/2" OD - 1 3/8" ID Long Side = 1 5/8" OD x 1 9/16" ID Angle = 30 Degrees
![Honda GL1000L Hex Head Nut](/images/parts/100/49-0109.jpg)
Hex Head Nut
Hex Head Nut Pk/10 Plated Finish Size: 10mm