Honda ► GL1100 ►
-
Here’s our hand-picked list of parts and accessories for your Honda GL1100 with universal parts included►
- Honda
Air Screw Needle O-Ring
Air Screw Needle O-Ring. 2.8mm x 1.2mm. Note: sold each, order the quantity you require
Cylinder Head Intake Boot O-Rings (Set/4)
Cylinder Head Intake Boot O-Rings, Size 40 x 2.6 (Set of 4). Replaces OEM # 91301-371-005 / 91325-413-830 These are Used Where the Manifolds Attach to the Cylinder Heads.
Air Cut Off Valve With Cover
Carb Air Cut Off Valve with Cover - OEM # 16048-429-771 (Diaphragm), 16048-425-771 (Spring + 1 O-Ring), 16048-429-771 (Cover).
Full Gray/Black Cover Set GL1100 1980-82
Replacement Full Gray/Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright.. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
Black Seat Cover Set GL1100 1983
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Full Black Cover Set GL1100 1980-82
Replacement Full Black Cover Set. Includes the Seat Cover, Back Rest Cover, and 2 Pouches. (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the COVERS, Not the Full Seat.
Black Seat Cover Set GL1100 1980-82
Replacement Black Seat Cover Set (No trim or hardware included just re-use existing hardware). There is a layer of foam sewn into the top if the seat cover to improve ride comfort and smooth out any defects in the seat foam. There is not a "Honda" stencil on the rear of the cover due to copyright. Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Complete installation instructions as well as step by step instructions on how to repair damaged seat foam can be found in the instructions section of our website. This is for the SEAT COVER, Not the Full Seat.
Clutch Cover Gasket
Clutch Cover Gasket - Replaces OEM# 11393-MG9-306 / 11393-MG9-000 / 11393-463-306 / 11393-463-000
Pulser Cover Gasket
Pulser Cover Gasket - Replaces OEM# 30379-463-306 / 30379-463-000
Final Gear Cover Gasket
Final Gear Cover Gasket - Replaces OEM# 11372-463-003 / 11372-463-306 / 11372-371-010 / 11372-371-306 / 11372-371-000
Clutch Oil Pump Gasket
Clutch Oil Pump Gasket - Replaces OEM# 15229-371-000
Oil Passage Gasket
Oil Passage Gasket - Replaces OEM# 15128-371-000
Water Joint Thermostat Gasket
Water Joint Thermostat Gasket - Replaces OEM# 19429-371-306 Note: 2 used per bike, order the quantity you require
Cylinder Head Cover Gasket
Cylinder Head Cover Gasket - Replaces OEM# 12391-371-306 / 12391-371-000
Points Cover Gasket
Points Cover Gasket - Replaces OEM# 30376-371-000 Note: 2 used per bike, order the quantity you require
Water Pump Gasket
Water Pump Gasket - Replaces OEM# 11396-371-306
Front Left Timing Belt Cover Gasket
Front Left Timing Belt Cover Gasket - Replaces OEM# 11832-371-010 / 11832-371-000
Front Right Timing Belt Cover Gasket
Front Right Timing Belt Cover Gasket - Replaces OEM# 11831-371-010 / 11831-371-000
Transmission Cover Gasket
Transmission Cover Gasket - Replaces OEM# 11391-371-306 / 11391-371-000
Speedometer & Tachometer Crimp Ring Set/2
Speedometer & Tachometer Crimp Ring Set/2 for NIPPON SEIKI gauges. When changing the speedometer or tachometer face plates these rings are often damaged. Get a new set today to have your speedo & tachometer restoration looking perfect! Dimensions: Inner diameter 103.4mm. - Outer diameter 108.2mm.
Speedometer / Tachometer Glass Lens Rubber Seal
Speedometer or Tachometer Glass lens Rubber Seal. This seal is used when replacing the glass on the Speedo or Tach. Fits: All 92mm (3.6") glass lenses. Sold each, order the quantity you require
Speedometer & Tachometer Replacement Glass Lens Set/2
Speedometer & Tachometer 92mm Glass Lens Set/2. If the glass lens of your gauges have scratches or are broken, with these glass lenses you are able to repair your gauges' lenses. These glass lenses are slightly bent like the original glass lenses.
Speedometer / Tachometer Internal Rubber Seal
Speedometer / Tachometer Internal Rubber Seal. This internal rubber seal replaces the ripped, dried or missing rubber internal seal. This internal rubber seal fits to any stock type Honda CB750 ND brand gauges.
Fuel Petcock Repair Kit
Fuel Petcock Repair Kit
Shock Absorber Washer
Shock Absorber Washer, Used when Installing Shocks. Replaces OEM # 90521-292-000 Note: Washers sold Each, order the quantity you require
Shock Absorber Nut
Shock Absorber Nut, Used when Installing Shocks. Replaces OEM # 90309-315-000 Note: Nuts sold Each, order the quantity you require
Tappet Adjuster Screw & Nut Set
Tappet Adjuster Screw & Nut Set. Each Set includes one Tappet Adjuster Screw and one Nut. Replaces OEM # 90012-426-000 (Adjuster), OEM # 90206-250-000 (Nut). Note: Order the Quantity of Sets your Bike Requires
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Side Stand Spring
Side Stand Spring, Replaces OEM # 95014-72402
Tachometer Cable
Stock Type Tachometer Cable, Replaces OEM # 37260-463-000
Clutch Cable
Clutch Cable, Replaces OEM# 22870-MB9-670
Clutch Cable
Clutch Cable, Replaces OEM# 22870-463-670
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-425-870 End to End Length 38.5" Made in Japan
Speedo Cable
Speedo Cable OEM Ref # 44830-MB9-780 / 44830-MJ1-000 / 44830-MB2-000
Choke Cable
Stock Type Choke Cable, Replaces OEM # 17950-371-010
Throttle Cable "B" - Push Type
Throttle Cable "B" Push Type, Replaces OEM# 17920-MB9-670
Throttle Cable "A" - Pull Type
Throttle Cable "A" Pull Type, Replaces OEM# 17910-MB9-670 , 17910-371-980 , 17910-371-660.
Haynes Workshop Manual
Haynes Workshop Manual Honda GL1100 Gold Wing 1979-1981 1085cc
Starter Motor Terminal Rubber Boot
Starter Motor Terminal (Cover) Rubber Boot. Replaces OEM # 32411-230-000
Shock Absorber Joint Rubber Set/2
Shock Absorber Joint Rubber Set/2. Replaces OEM # 52484-292-000
Master Cylinder Rubber Boot
Master Cylinder Rubber Boot. Replaces OEM # 45522-422-000
Speedo/Tachometer Meter Cushion
Speedo/Tachometer Meter Cushion, Replaces OEM # 37235-323-700
Horn Sub Harness
Horn Sub Harness, This is the Harness that Attaches to the Horn. Replaces OEM # 32103-463-000
Taillight Sub Harness
Taillight Sub Harness "A", Replaces OEM # 32101-463-000
Helmet Holder Lock w Keys
Helmet Holder Lock with Keys, Replaces OEM # 50710-086-007
Primary Chain
OEM Quality Primary Chain, 60 Link. Replaces OEM # 23131-463-003
Passenger Rear Footrest Rubber Set
Passenger Rear Footrest Rubber Set/2, Replaces OEM # 50716-371-660
Front Wheel Bearing Retainer Ring Tool
Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.
GL1100 1981-82 Warning and Service Label Set
Honda GL1100 1981-82 Goldwing ~ Warning & Service Label (Sticker) Set. This set includes several warning and service labels that were originally found on these bikes when new. You'll find the quality & accuracy of these decals second to none and accurate in every detail. These reproductions will add the finishing touch to your restoration. This 9 piece warning & service label set includes: 1 - Important Information (tire info) 1 - Accessories & Loading: Warning 1 - Caution: Battery 1 - Caution: Radiator 1 - Helmet Holder 1 - Rear Suspension Air Pressure 1 - Exhaust Modification Warning 1 - Remember: Preserve Nature (helmet warning) - Printed on Clear 1 - Reserve Tank: Coolant Level - Printed on White These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
GL1100 1981-82 Complete Decal Set ~ Candy Wineberry Red Model
GL1100 1981-82 Complete 14 Pc. Decal (Sticker) Set for the Candy Wineberry Red Model. Includes - Tank side stripes, Tank top stripes, Side cover stripes, Front fender stripes and Rear fender stripes. These reproductions will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.