Honda ► XL250 ►
-
Here’s our hand-picked list of parts and accessories for your Honda XL250►
- Honda
Throttle Sleeve
Nylon Throttle Sleeve - Replaces OEM # 53141-300-010
Gas Tank Cap
Chrome Cap Gas Tank Cap with Gasket Installed, Replaces OEM# 17620-402-000 , 17620-402-010
Brake Lever
Brake Lever OEM Ref # 53175-402-700 / 53170-216-670 / 53175-286-000 / 53170-286-670 / 53170-329-010 / 53170-369-700 / 53175-369-700
Clutch Lever ~ GP Style
Clutch Lever - Custom GP Style in Silver, This Has More of a Bend/Kickback then the stock lever. Replaces OEM # 53178-369-700
Brake Lever Perch
Brake Lever Perch, Replaces OEM# 53171-312-003 Includes a RH Thread 10mm Mirror Mount. Fits to 7/8" handlebars and includes a hole for the brake light switch.
Clutch Lever Perch
Clutch Lever Perch, Replaces OEM# 53172-310-010 / 53172-110-000 / 53172-310-000 Includes a 10mm Mirror Mount, for 7/8" handlebars
Tail Light Assembly
Tail Light Assembly, Replaces OEM# 33701-329-671 2 Wires
Stock Type Reflector
Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670
Starter / Horn Button
Starter / Horn Button
Ignition Coil with Condenser
Ignition Coil with Condenser, Replaces OEM# 30500-950-405 6 Volt, 5.4k Ohm.
Turn Signal Flasher Relay
Turn Signal Flasher Relay, Replaces OEM# 38310-428-671 / 38300-GFO-405 / 38300-243-670 / 38300-089-671 / 38300-428-004 / 38301-428-671 / 38301-428-004. 6 Volt - 17W - 2 Prong Style Does Not work with LED signals
Handlebar Rubber Cover Set/2
Handlebar Rubber Cover Set/2 - Replaces OEM# 53176-329-000 (Right Side), 53179-329-000 (Left Side) One rubber for the left and one for the right side per set.
Stock Type Mirror Set
Stock Type Mirror Set/2, Replaces OEM# 88110-329-730 / 88110-074-000 / 88120-329-730 / 88120-074-000 Chrome Mirrors, 8" Stem Length
Top End Engine Gasket Set
Top End Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
Complete Engine Gasket Set
Complete Engine Gasket Set Includes Contents Shown in Photo Honda used different head gaskets on these bikes. 12191-329-010 used up to Engine SN 1062714 and 12909-283-000 used up to Engine SN 2009778. The gasket in this kit is the later style, not the type used in some of the early K0 models from 1972.
Gear Change Lever
Gear Change Lever Universal Fit Spline Diameter 11.5mm Total Length 6 1/2" Offset 4"
Gas Cap Rubber Seal
Gas Cap Rubber Seal, Replaces OEM # 17631-329-003
Carb Float
Carb Float with Pin, Replaces OEM # 16013-329-004 Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
Float Bowl Gasket
Float Bowl Gasket
Rectifier
Rectifier, Replaces OEM# 31700-385-000 / 31700-356-000 / 31700-329-013
Fork Dust Seals
Fork Dust Seals Set/2 35 X 53 OEM Ref # 91254-434-003 / 91254-435-003 / 51425-340-000
Engine Cover Bolt Set
High Quality Premium Stainless Steel Engine Cover Bolt Set Set includes: 38 Bolts and 3 Allen keys for a total of 41 pieces. These bolts are all smooth head Allen bolts and are for the visible covers only.
Cotter Valve / Valve Keeper
Cotter Valve / Valve Keeper, Replaces OEM# 14781-107-003 / 14781-107-020. 2 Used For Each Valve Spring. Sold Each, Order the Quantity you Require
Fuel Petcock
Fuel Petcock, Replaces OEM# 16950-107-000 / 16950-107-005 / 16950-356-005 / 16950-070-700 / 16950-356-700. Single Fuel Output type - Fuel Hose Exits to the Side. Please check the photo, this petcock may not be identical to the OEM type but will work for these models. This petcock has a longer body and the fuel output spigot is located differently then stock for some models.
Rear Brake Shoes
Rear Brake Shoes Pk/2 Diameter: 138.3mm Width: 25mm OEM Ref # 43120-329-671
Kick Starter Stopper Spring with Steel Ball
Kick Starter Stopper Spring with Steel Ball Set. Replaces OEM # 28333-300-000 (Spring) and OEM # 96211-08000 (Steel Ball).
Flange Knock Bolt (Set/2)
Flange Knock Bolt (Set/2). These Bolts Fasten to the Cam Sprocket. Replaces OEM # 90082-HA0-000
Clutch Center Nut Removal Tool
Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.
Clutch Center Nut Removal Tool ~ Premium
Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 x 24.
Clutch Plate
Clutch Plate 7 Pieces Required OEM Ref # 22201-286-010 / 22201-415-000 / 22201-ME2-000
Steel Clutch Plate
Steel Clutch Plate 2 Pieces Required
Clutch Spring Kit
Clutch Spring Kit. Note: There will be extra springs in this kit for some bikes.
Carb Rebuild Kit
Carb Rebuild Kit Includes Items Pictured 1 Kit Needed Per Carb
Lens Screw
Tail Light Lens Screws, Pack of 10 Screws. Replaces OEM # 93500-04055-4J ISO Std. Pitch - Steel Plated Size: 4 x 55mm
Fuel Petcock Gasket
Fuel Petcock Gasket, Replaces OEM# 16957-ZE1-812 / 16955-028-004 / 16955-011-010
Fuel Petcock Gasket
Fuel Petcock Gasket / O-Ring, Replaces OEM# 16997-273-006 / 16960-011-000 This is the o-ring that goes between the fuel petcock body and the gas tank. Please ensure you have a stock gas tank prior to ordering
Front Sprocket Lock Plate Set
Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.
Clutch Cover Screw Set
Clutch Cover Screw Set. Includes all 3 Screws needed to fasten the Clutch Cover. Replaces OEM # 93700-06016-0B X3.
Fork Cap O-Ring Set/2
Fork Cap O-Ring Set of 2. 23mm x 2.8mm size. Replaces OEM # 94608-50000 X2.
Speedometer Cable
Speedometer Cable - Black - OEM Ref. # 44830-425-870 End to End Length 38.5" Made in Japan
Cam Chain
Cam Chain 219T x 94 D.I.D (Daido) Takes 01-8803 Rivet Link Pitch: .3061" Side Plate: Peanut Average Tensile Strength: 1800lbs OEM Ref # 14401-286-003 / 14401-410-003
Seat Lock with Keys
Seat Lock with Keys, Replaces OEM # 77230-399-007 / 77230-107-711 This seat lock works perfect for the bikes listed but the locking mechanism sticks out a bit farther then the OEM type. If you have lost your old key you have to remove the seat lock bracket and assembly. This can be done with a short 10mm wrench or socket, once that's done the rest is easy.
Gas Tank Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Gas Tank Decal (Sticker) 6 Pc. Set. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Complete Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Gas Tank Decal (Sticker) 6 Pc and Front & Rear Fender Decals 6pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Front & Rear Fender Decal Set
Honda XL250 (1972) Custom Silver Metallic USA Model Front & Rear Fender Decal Set - 6pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Warning & Service Label Decal Set
Honda XL250 (1972) USA Model Warning & Service Label Decal (Sticker) Set - 9pcs. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Clutch Tab Washer
Clutch Tab Washer, 16mm Size, Replaces OEM # 90431-292-000
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Grease Fitting Nipple (Pk/2)
Grease Fitting Nipple A .45 (Pk/2). Replaces OEM # 96201-30001