Honda ► XL250S ►
-
Here’s our hand-picked list of parts and accessories for your Honda XL250S with universal parts included►
- Honda
Intake Manifold Boot
Intake Manifold Boot with O-Ring, Replaces OEM# 16211-428-000 / 91301-428-003 / 91301-MG2-790
Float Needle
Float Needle High Quality - Made In Japan OEM Ref # 16155-382-004 / 16011-393-004 / 16011-KG0-891 / 16030-1007 / 16030-028 / 16011-382-004
Front Sprocket Lock Plate Set
Front Sprocket Lock Plate with 2 Lock Plate Bolts. It's Always good to replace these when installing a new front sprocket. Replaces OEM # 23811-292-000 (Plate) and OEM # 92101-06016-0A (Bolts) X2.
Steering Stem Washer
Chrome Steering Stem Washer, Replaces OEM # 90503-283-000 Sold Each, order the quantity you require.
Complete Decal Set
Honda XL250S (1978) USA Model Complete Decal (Sticker) Set - 6pcs. Includes - Fuel Tank Decals, Side Panel Decals, Side Panel Service Label and Helmet Warning Label on top of fuel tank. These reproduction decals will add the finishing touch to your restoration. These decals are no longer available from the manufacturer. All decals are "printed" on the highest quality materials from companies such as 3M and Avery. All decals have a protective coating to resist scratching and to protect colors from UV rays. These decals are adhesive backed for simple application.
Rear Brake Light Stop Switch Spring
Rear Brake Light Stop Switch Spring. This is the Spring that Attaches to the Rear Stop Light Switch. Replaces OEM # 35357-MA2-610
Valve Stem Seal
Valve Stem Seal. Replaces OEM # 12209-333-005 / 12209-333-005 Sold Each - Order the Quantity you Require
Side Stand Pivot Bolt & Nut Set
Side Stand Pivot Bolt & Nut Set, This is the Set Used to Fasten the Side Stand in Place. Replaces OEM # 90108-283-000 (Bolt) and 94002-10000-0S (Nut).
Handlebar Clutch Lever Pivot Bolt & Nut Set
Handlebar Clutch Lever Pivot Bolt & Nut Set. This is the Set that Fastens the Clutch Lever in Place. Includes One Bolt with One Nut. Replaces OEM # 90114-310-000 (Bolt) and OEM # 94001-06200-0S (Nut).
Custom Performance Magnetic Oil Drain Plug ~ Joker Machine
Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM Ref # 92800-12000 Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A. Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.
Handlebar Clamp Set /2
Black Handlebar Clamp Set/2. These clamp the stock 7/8" handlebars to the upper triple clamp. Replaces OEM # 95014-22200
Piston Pin Clips (Pk/2)
Piston Pin Clips, 19mm (Pk/2) - Replaces OEM # 94601-19000
Piston Pin
Piston Pin - Replaces OEM # 13111-428-000 / 13111-471-000
Piston Ring Set (Standard Size)
Standard Size Piston Ring Set Ring Set Replaces OEM# 13011-428-003 / 13011-428-005 / 13011-HC4-306 (Std.)
Cylinder Head Gasket
Cylinder Head Gasket, Replaces OEM# 12251-428-306 / 12251-428-010 / 12251-428-000.
Cylinder Head Gasket
Cylinder Head Gasket, Replaces OEM# 12909-428-003 / 12909-283-000 / 12909-333-000.
Cylinder Base Gasket
Cylinder Base Gasket, Replaces OEM# 12191-471-306 / 12191-428-010 / 12191-471-000.
Clutch Cover Gasket
Clutch Cover Gasket, Replaces OEM# 11394-MA0-306 / 11394-428-000 / 11394-429-000 / 11394-MA0-000.
Stator Cover Gasket
Stator Cover Gasket, Replaces OEM# 11395-429-306 / 11395-428-000 / 11395-429-000.
Alternator Stator Cover Gasket
Alternator Stator Cover Gasket, Replaces OEM# 11396-428-306 / 11396-428-300.
Exhaust Gasket
Exhaust Gasket - Sold Each Replaces OEM# 18291-HB2-900 / 18291-001-306 / 18291-001-010.
Seat Cover
Replacement Seat Cover with Reinforced Passenger Strap (No trim or hardware included just re-use existing hardware). Each seat cover is made entirely by hand in North America, it is crafted slowly with great care by a gifted master upholster, using only the top grade materials available. Replace your stock seat cover and fasten just like the original cover. Our covers are made of special cold resistant outdoor 4-way stretch Marine grade vinyl material (please note that this is not the cheap vinyl that most of the others sell, this is the very best vinyl available) Designed for heavy outdoor use. Note- No "Honda" printed on this cover. Fits: the Original Stock Honda XL250S 1978 This is for the SEAT COVER, Not the Full Seat, Photo Shows Seat Cover Installed for reference
Clutch Cable
Clutch Cable, Replaces OEM# 22870-435-610 / 22870-429-000 / 22870-428-000 / 22870-KB4-000 / 22870-400-000 / 22870-329-000 / 22870-356-000
Throttle Cable "A"
Throttle Cable "A" - Replaces OEM# 17910-385-700 / 17910-428-000 / 17910-429-000
Speedometer Cable Inner Wire
Speedometer Cable Inner Wire, Replaces OEM# 44831-KJ9-000 / 44831-371-010 This is the inner wire (that is inside the speedometer cable). So, if your cables exterior is in good condition this will be a great cheaper alternative to replace the old inner wire and get your cable working perfectly.
Speedometer Cable
Speedometer Cable, Replaces OEM# 44830-KJ9-000 / 44830-428-000 / 44830-428-010 / 44830-428-900
Front Brake Cable
Front Brake Cable, Replaces OEM# 45450-428-P00 / 45450-429-P00 / 45450-428-900 / 45450-435-000 / 45450-428-870 / 45450-428-000
Headlight Case
Headlight Case, Replaces OEM# 61301-399-000ZA
Headlight Assembly
Headlight Assembly, Replaces OEM# 33100-428-671 Comes Complete with Headlight and Bucket
Rear Turn Signal Rubber Stem Set
Rear Turn Signal Rubber Stem Set, Replaces OEM# 33604-437-000 / 33604-428-000
Battery Box Rubber
Battery Box Rubber, Replaces OEM# 83618-323-000 Sold Each, Order the Quantity you Require
Handmade Christmas Stocking
HAPPY HOLIDAYS! We are thrilled to be able to offer handmade, one-of-a-kind upcycled Christmas stockings by “Rider Ragsâ€. Featuring a CB750 on the front. They include belt, chain and Honda keychain. Each stocking is individually handmade so there will be variations in denim and belts. Some toes face right and some left. If you have a preference for right/left toe facing make a note in the order comments.
Universal Glas-Pak Insert
Universal Glas-Pak Insert - Fits 1 1/2" Pipes - Glass Pak's Actual Size 1 3/8" Tone down your TT or Drag Pipes
Tire Valve Stem
Tire Valve Stem - Straight Metal Type
Tire Valve Stem
Tire Valve Stem - Straight Rubber Type
Tire Valve Stem
Tire Valve Stem - 90 Degree Metal Type
Tire Valve Stem Caps
Tire Valve Stem Caps - Pk/10 Metal Caps with Core Removal Notch Built In
Tire Valve Stem Caps
Tire Valve Stem Caps - Pk/2 Metal Caps with Core Removal Notch
Tire Fill Valve
Ninety Degree Tire Fill Valve
Rivet Link
Cam Chain Rivet Link Stepped Parallel Plate Fits BF05T Cam Chains
Rivet Link
Cam Chain Rivet Link Stepped Parallel Plate Fits 219FTSS Cam Chains
Rivet Link
Cam Chain Rivet Link Stepped Peanut Plate Fits 219T Cam Chains
Clip Link
Cam Chain Clip Link Peanut Shape Fits 25H Cam Chains
Cam Chain Rivet Link
Cam Chain Rivet Link Peanut Shape Fits BS05MH TSUBAKI
Cam Chain Rivet Link
Cam Chain Rivet Link Peanut Shape Fits BF05M TSUBAKI
Cam Chain Rivet Link
Cam Chain Rivet Link Fits 82RH2015
Custom Micro Push Button/Kill Switch
Custom Micro Push Button/Kill Switch. High quality chrome switch designed to clean up the appearance of your bike while allowing the use of a switch. Works great as a hidden start/kill or horn button. Includes a contoured washer which allows for installations on round surfaces such as handlebars or frames. Switch Size 14mm x 12mm with 2X 20" wires.
Push/Pull Style Throttle Assembly
Custom Dual Cable Style (Push/Pull) Throttle Assembly for 7/8" bars. Satin Black Die-Cast aluminum housing with a nylon throttle tube. Housing is threaded to accept Honda push/pull throttle cables. Opens carbs up to 38mm. Allen key included for assembly. Pull cable thread size is M10 x 1.25mm, Push cable thread size is M12 x 1.00mm. Throttle is 6" total in length.
Heated Grips
Heated Grip Set/2 for 7/8" HANDLEBARS ONLY. Warms up when the engine is running. Features a high/low/off switch. Easy to use relay protected sealed controls. Rubber resistant to low temperatures and resists cracking. Easy install with no gluing needed. 130mm Length