Kawasaki ► 

Refine Search Results
Kawasaki  Valve Shim Tool
USD$ 9.60
Out of Stock
Email Me When Available

Valve Shim Tool

#35-1040

Valve Shim Tool Suz GS550/750/850/1000

USD$ 9.60
Out of Stock
Email Me When Available
Kawasaki  Valve Shim Tool
USD$ 9.60

Valve Shim Tool

#35-1041

Valve Shim Tool Honda CBX, CB750/900

USD$ 9.60
Kawasaki  Clutch Holding Tool
USD$ 22.15

Clutch Holding Tool

#35-9052

Clutch Holding Tool Adjustable Vise Grip Style Clutch Basket & Sprocket Holder Tool

USD$ 22.15
Kawasaki  Piston Ring Tool
USD$ 16.25

Piston Ring Tool

#35-9112

Piston Ring Tool with plastic storage case. This tool is designed to prevent ring breakage during cylinder installation. This tool can be easily removed after cylinder is in position. Comes with 4 rings to accept the smallest triple to the largest single cylinder engines. Fits 40-85mm sizes.

USD$ 16.25
Kawasaki  Metric Tap & Die Set
USD$ 85.05

Metric Tap & Die Set

#35-8030

Metric Tap & Die Set 39pc Set Includes Pitch Gauge, Die Holder, 2 Tap Wrenches, Screw Driver, Metric Taps: M3 X 0.5 M3 X 0.6 M4 X 0.75 M4 X 0.7 M5 X 0.8 M5 X 0.9 M6 X 1.0 M6 X 0.75 M7 X 0.75 M7 X 1.0 M8 X 1.0 M8 X 1.25 M10 X 1.25 M10 X 1.5 M12 X 1.25 M12 X 1.5 1/8NPT X 27 Includes 17 Dies to Match the 17 Tap Sizes Listed.

USD$ 85.05
Kawasaki  Drive Chain Riveter Tool
USD$ 44.35

Drive Chain Riveter Tool

#35-0006

Drive Chain Riveter Tool Rivets High Strength Rear Drive Chain Rivet Links With Hollow Pin Ends on Many DID Brand Chains.

USD$ 44.35
Kawasaki  Replacement Pin For Riveter Tool
USD$ 5.15

Replacement Pin For Riveter Tool

#35-0007

Replacement Rivet Pin For Drive Chain Riveter Tool (35-0006)

USD$ 5.15
Kawasaki  Steering Bearing Installation Tool
USD$ 40.65

Steering Bearing Installation Tool

#35-0073

Steering Bearing Installation Tool. Includes one driver and three aluminum adapters. Unique system utilizes specially designed aluminum adaptors to quickly and accurately install nearly any lower bearing. Use with a soft faced hammer.

USD$ 40.65
Kawasaki  Chain Press Assembly Tool
USD$ 4.80

Chain Press Assembly Tool

#35-0081

Chain Press Assembly Tool Used to Press On Sideplates on rivet or clip rear drive chains

USD$ 4.80
Kawasaki  Spark Plug Gapping Tool
USD$ 2.90

Spark Plug Gapping Tool

#35-0136

Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters.

USD$ 2.90
Kawasaki  Brake Caliper Piston Tool
USD$ 17.70

Brake Caliper Piston Tool

#35-1086

Brake Caliper Piston Tool Holding/Detaching Tool For Brake Calipers. Grabs Brake Caliper Pistons Internally So Seized Pistons Can Be Worked Loose From The Caliper.

USD$ 17.70
Kawasaki  Tappet Adjuster Tool Set
USD$ 9.60

Tappet Adjuster Tool Set

#35-3040

Tappet Adjuster Tool Set Small 4 Stroke Engines Includes 8mm, 9mm, 10mm Sockets 1 Adjuster 1/8" (3mm) Square Size

USD$ 9.60
Kawasaki  Vacuum Brake Bleeder Tool
USD$ 65.10

Vacuum Brake Bleeder Tool

#35-3050

Vacuum Brake Bleeder Tool *Not For Use With Speed Bleeders*

USD$ 65.10
Kawasaki  Tire Valve Stem Tool
USD$ 2.40

Tire Valve Stem Tool

#35-9040

Tire Valve Stem Tool Core Removal & Repair Tool

USD$ 2.40
Kawasaki  Carb Cleaning Tool Set
USD$ 8.10

Carb Cleaning Tool Set

#35-9110

Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.

USD$ 8.10
Kawasaki  Carb Cleaning Tool Set
USD$ 8.85

Carb Cleaning Tool Set

#35-9125

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.

USD$ 8.85
Kawasaki  Vintage Motorcycle Tool Set
USD$ 20.95

Vintage Motorcycle Tool Set

#73-0078

Vintage Motorcycle Tool Set. Have you lost the original tool set that came with your motorcycle? Well, we have a great alternative for you! This 8 pc set features many of the same tools that came with your bikes stock tool kit. To check out the exact contents included check out the picture. All contained within a durable pouch. Features Wrenches 8/10, 12/14 and 14/17 Note: These may not be 100% identical to your bikes OEM tool kit (check the photo for differences) but are very similar and several of the tools are likely identical. A great option at an amazing price!

USD$ 20.95
Kawasaki  Stud Extractor 1-6mm
USD$ 14.00

Stud Extractor 1-6mm

#35-0102

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)

USD$ 14.00
Kawasaki  Stud Extractor 6-12mm
USD$ 18.45

Stud Extractor 6-12mm

#35-0103

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)

USD$ 18.45
Kawasaki  Rotor and Sprocket Holder
USD$ 22.15

Rotor and Sprocket Holder

#35-9121

Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.

USD$ 22.15
Kawasaki  Heavy Duty Terminal Crimper Tool
USD$ 25.85

Heavy Duty Terminal Crimper Tool

#35-0011

Heavy Duty Metric Terminal Crimper Tool, fastens metric terminals to wires. Includes sizes 10-12, 14-16 and 18-22. Professionally Crimps like factory originals.

USD$ 25.85
Kawasaki  Cylinder Stud Installation Tool Set
USD$ 9.60

Cylinder Stud Installation Tool Set

#35-0101

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.

USD$ 9.60
Kawasaki  Cam Chain Breaker / Riveter Tool
USD$ 51.75

Cam Chain Breaker / Riveter Tool

#35-0112

Cam Chain Breaker / Riveter Tool

USD$ 51.75
Kawasaki  Deluxe Shock Preload Adjusting Tool
USD$ 8.10

Deluxe Shock Preload Adjusting Tool

#35-9108

Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars. Fits: Our shock sets and many other aftermarket shocks.

USD$ 8.10
Kawasaki  Portable Auxiliary Fuel Tank Tool
USD$ 36.95

Portable Auxiliary Fuel Tank Tool

#35-9120

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

USD$ 36.95
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.