Suzuki ► GS125 ►
-
Here’s our hand-picked list of parts and accessories for your Suzuki GS125 with universal parts included►
- Suzuki
Stud Extractor 6-12mm
Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)
Impact Driver
Impact Driver Heavy Duty #2500 Driver complete with 4 Piece 2" Hex bits. This driver is 3/8" drive can also be used with any 3/8" drive socket.
Replacement Bit Set
Replacement Bit Set 1 1/2" Standard Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits
Cable Luber
Cable Luber Used on All Cables, Best way to lube & clear cables of moisture & Dirt.
Spoke Wrench Set
Spoke Wrench Set Fits #8/9 & #10/11 Chrome
Replacement Bit Set
Replacement Bit Set 3" Long Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits
Cam Chain Breaker / Riveter Tool
Cam Chain Breaker / Riveter Tool
Spring Puller
Spring Puller, Made from Heat Treated Alloy Steel. Great for Removing and Installing Those Hard to Reach Springs.
Snap Ring Plier Set
Snap Ring Plier Set Removes Internal or External Snap Rings Includes 2 Straight & 2 Angled Tips
Valve Spring Compressor
Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.
Replacement Cam Chain Breaker Pin
Replacement Cam Chain Breaker Pin For Our Breaker 35-0112
Oil Filter Wrench
Oil Filter Wrench Wafer-Thin For GL1500 Goldwings Also Works On Many other Honda/Yamaha/Kawasaki Models
Permatex Valve Lapping Paste
Valve Lapping Paste - Permatex Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.
Chain Puller
Chain Puller Pulls Together Chain Ends to Allow Joiner Link To be Slipped Into Place
Spark Plug Gapping Tool
Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters.
Valve Shim Tool
Valve Shim Tool Honda CBX, CB750/900
Fork Cap Socket Tool
19mm Fork Cap Socket Tool, This Tool Is Needed To Loosen Or Remove The Front Fork Cap Bolts On Many Bikes
Fork Oil Level Gauge
Fork Oil Level Gauge For Adjusting The Oil Level On All Forks. Adjustable Ring Measures Oil Levels From 0-300mm in 50mm Increments. 60ml Capacity Syringe Adjusts Fluid Levels.
Brake Caliper Piston Tool
Brake Caliper Piston Tool Holding/Detaching Tool For Brake Calipers. Grabs Brake Caliper Pistons Internally So Seized Pistons Can Be Worked Loose From The Caliper.
Leakdown Tester
Leakdown Tester Dual Guage Tester Complete With 25" hose with Stepped adaptor One Dial Guage Reads 0-100PSI, Other Reads 0-100 Percent
Feeler Gauge Set
Feeler gauge set with 45 degree ends. Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026" Marked in Metric and Inch sizes.
Feeler Gauge Set
Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only). 0.05mm. - (.002") 0.55mm. - (0.22") 0.10mm. - (.004") 0.60mm. - (0.24") 0.15mm. - (.006") 0.65mm. - (0.26") 0.20mm. - (.008") 0.70mm. - (0.28") 0.25mm. - (.010") 0.75mm. - (0.30") 0.30mm. - (.012") 0.80mm. - (0.32") 0.35mm. - (.014") 0.85mm. - (0.34") 0.40mm. - (.016") 0.90mm. - (0.36") 0.45mm. - (.018") 0.95mm. - (0.38") 0.50mm. - (0.20") 1.00mm. - (0.40")
Feeler Gauge Set
Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 32pc Set (marked in metric and inch sizes). 0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025") 0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005") 0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009") 0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012") 0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015") 0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018") 0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021") 0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025") 0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030") 0.80mm. - (.032")
