Yamaha ► FZ600 ►
-
Here’s our hand-picked list of parts and accessories for your Yamaha FZ600 with universal parts included►
- Yamaha
Extractor & Drill Set
10 Piece Extractor & Drill Set in a Plastic Case. Set contains 5X extractors (#1 through #5) and 5X mechanic's length cobalt drills. Removes bolts and screws up to 5/8". Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"
Cylinder Stud Installation Tool Set
3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life. Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.
Stud Extractor 1-6mm
Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (1-6mm)
Stud Extractor 6-12mm
Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench. Fits studs from (6-12mm)
Impact Driver
Impact Driver Heavy Duty #2500 Driver complete with 4 Piece 2" Hex bits. This driver is 3/8" drive can also be used with any 3/8" drive socket.
Replacement Bit Set
Replacement Bit Set 1 1/2" Standard Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits
Cable Luber
Cable Luber Used on All Cables, Best way to lube & clear cables of moisture & Dirt.
Spoke Wrench Set
Spoke Wrench Set Fits #8/9 & #10/11 Chrome
Replacement Bit Set
Replacement Bit Set 3" Long Driver Bit Set Fits 35-0106 & 35-0095 Impact Drivers Contains 2 Phillips & 2 Slotted Bits
Cam Chain Breaker / Riveter Tool
Cam Chain Breaker / Riveter Tool
Spring Puller
Spring Puller, Made from Heat Treated Alloy Steel. Great for Removing and Installing Those Hard to Reach Springs.
Snap Ring Plier Set
Snap Ring Plier Set Removes Internal or External Snap Rings Includes 2 Straight & 2 Angled Tips
Valve Spring Compressor
Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.
Replacement Cam Chain Breaker Pin
Replacement Cam Chain Breaker Pin For Our Breaker 35-0112
Oil Filter Wrench
Oil Filter Wrench Wafer-Thin For GL1500 Goldwings Also Works On Many other Honda/Yamaha/Kawasaki Models
Safety Wire Pliers
Safety Wire Pliers Standard Size With Return Spring Mechanism For Easy Wire Twisting
Chain Puller
Chain Puller Pulls Together Chain Ends to Allow Joiner Link To be Slipped Into Place
Spark Plug Gapping Tool
Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters.
Valve Shim Tool
Valve Shim Tool Honda CBX, CB750/900
Fork Cap Socket Tool
19mm Fork Cap Socket Tool, This Tool Is Needed To Loosen Or Remove The Front Fork Cap Bolts On Many Bikes
Fork Oil Level Gauge
Fork Oil Level Gauge For Adjusting The Oil Level On All Forks. Adjustable Ring Measures Oil Levels From 0-300mm in 50mm Increments. 60ml Capacity Syringe Adjusts Fluid Levels.
Brake Caliper Piston Tool
Brake Caliper Piston Tool Holding/Detaching Tool For Brake Calipers. Grabs Brake Caliper Pistons Internally So Seized Pistons Can Be Worked Loose From The Caliper.
Leakdown Tester
Leakdown Tester Dual Guage Tester Complete With 25" hose with Stepped adaptor One Dial Guage Reads 0-100PSI, Other Reads 0-100 Percent
Feeler Gauge Set
Feeler gauge set with 45 degree ends. Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026" Marked in Metric and Inch sizes.
Feeler Gauge Set
Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only). 0.05mm. - (.002") 0.55mm. - (0.22") 0.10mm. - (.004") 0.60mm. - (0.24") 0.15mm. - (.006") 0.65mm. - (0.26") 0.20mm. - (.008") 0.70mm. - (0.28") 0.25mm. - (.010") 0.75mm. - (0.30") 0.30mm. - (.012") 0.80mm. - (0.32") 0.35mm. - (.014") 0.85mm. - (0.34") 0.40mm. - (.016") 0.90mm. - (0.36") 0.45mm. - (.018") 0.95mm. - (0.38") 0.50mm. - (0.20") 1.00mm. - (0.40")
Feeler Gauge Set
Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 32pc Set (marked in metric and inch sizes). 0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025") 0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005") 0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009") 0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012") 0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015") 0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018") 0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021") 0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025") 0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030") 0.80mm. - (.032")
Wheel Rim Strip
Wheel Rim Strip - 18" x 1"
Graduated Cylinder
250 ml Graduated Cylinder 250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Graduated Cylinder
500ml Graduated Cylinder 500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Graduated Cylinder
Graduated Cylinder 1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids. 1 US Quart = 946cc (946ml.)
Locknut Wrench
Locknut Wrench 1/2" Drive, 6 Lug 42mm OD & 35mm ID Fits Cogged Locknuts Such As Steering Heads & Some Filters/Clutches
Tappet Adjuster Tool Set
Tappet Adjuster Tool Set Small 4 Stroke Engines Includes 8mm, 9mm, 10mm Sockets 1 Adjuster 1/8" (3mm) Square Size
Adjustable Fork Seal Driver 35-45mm
Adjustable 35-45mm Fork Seal Driver. This high quality tool can be used on many different fork sizes. Use these for easy installation of most fork seals on either conventional or inverted forks.
Vacuum Brake Bleeder Tool
Vacuum Brake Bleeder Tool *Not For Use With Speed Bleeders*
Tappet Adjusting Tool Set
Tappet Adjusting Tool Set 6 Piece Set Includes T-Socket Wrenches - 8mm, 9mm, 10mm Sizes 3 Adjusters - Slotted Screw, 3mm Square, 4mm Square
Tappet T-Socket Wrench
Tappet T-Socket Wrench 9mm
Tappet T-Socket Wrench
Tappet T-Socket Wrench 10mm
Tappet Adjuster
Tappet Adjuster Slotted Screw Type
Tappet Adjuster
Tappet Adjuster 4mm (3.5mm) Square
39mm Fork Seal Driver
39mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 39mm fork seals on either conventional or inverted forks.
35/36mm Fork Seal Driver
35/36mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 35 or 36mm fork seals on either conventional or inverted forks.
Fork Seal Driver
43mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 43mm fork seals on either conventional or inverted forks.
Fork Seal Driver
45mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 45mm fork seals on either conventional or inverted forks.
Fork Seal Driver
49/50mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 49mm or 50mm fork seals on either conventional or inverted forks.
Shock Ring Wrench
Ring Wrench to adjust shock preload. Fits: Our shock sets and many other aftermarket shocks.
Rim Savers
Rim Savers Set/2 Protect Rim From Lever Damage