YamahaRD350LC ► 

Refine Search Results
Yamaha RD350LC Gear Clamp 40-60mm.
USD$ 3.65

Gear Clamp 40-60mm.

#15-0670

Universal Gear Clamp for Carb Holders or Air Boxes. 9mm Wide. Adjusts with a screwdriver. Fits: Diameters 40-60mm (With a width of 9mm)

USD$ 3.65
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0672

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 53-56mm. (1.92" - 2.16")

USD$ 3.35
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0673

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 60mm-65mm or 2.36" to 2.56"

USD$ 3.35
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0684

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 41-44mm. (1.53" - 1.69")

USD$ 3.35
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0685

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 46-49mm. (1.77" - 1.92")

USD$ 3.35
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0686

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 66-69mm. (2.48" - 2.63")

USD$ 3.35
Yamaha RD350LC Universal Band Clamp
USD$ 3.35

Universal Band Clamp

#15-0687

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 69-72mm. (2.67" - 2.87")

USD$ 3.35
Yamaha RD350LC Band Clamp 45-47mm.
USD$ 3.35

Band Clamp 45-47mm.

#15-0688

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 45-47mm.

USD$ 3.35
Yamaha RD350LC Band Clamp 50-52mm.
USD$ 3.35

Band Clamp 50-52mm.

#15-0689

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 50-52mm.

USD$ 3.35
Yamaha RD350LC Band Clamp 58-60mm.
USD$ 3.35

Band Clamp 58-60mm.

#15-0690

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 58-60mm.

USD$ 3.35
Yamaha RD350LC Band Clamp 43-49mm
USD$ 1.50
Out of Stock
Email Me When Available

Band Clamp 43-49mm

#15-0691

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 43-49mm. (1.69"-1.93") Diameters

USD$ 1.50
Out of Stock
Email Me When Available
Yamaha RD350LC Band Clamp 67mm-73mm
USD$ 1.50

Band Clamp 67mm-73mm

#15-0693

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 67-73mm. (2.64"-2.87") Diameters

USD$ 1.50
Yamaha RD350LC Band Clamp 73mm-79mm
USD$ 0.75

Band Clamp 73mm-79mm

#15-0694

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 73-79mm. (2.87"-3.11") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 79-85mm
USD$ 0.75

Band Clamp 79-85mm

#15-0695

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 79-85mm. (3.11"-3.35") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 85-91mm
USD$ 0.75

Band Clamp 85-91mm

#15-0696

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 85-91mm. (3.35"-3.58") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 91-97mm
USD$ 0.75

Band Clamp 91-97mm

#15-0697

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 91-97mm (3.58"-3.82") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 97mm-103mm
USD$ 0.75

Band Clamp 97mm-103mm

#15-0698

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 97-103mm (3.82"-4.00") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 103mm-109mm
USD$ 0.75

Band Clamp 103mm-109mm

#15-0699

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 103-109mm (4.00"-4.29") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 109mm-115mm
USD$ 0.75

Band Clamp 109mm-115mm

#15-0700

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 109-115mm (4.29"-4.53") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 115mm-121mm
USD$ 0.75

Band Clamp 115mm-121mm

#15-0701

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 115-121mm. (4.53"-4.76") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 121mm-127mm
USD$ 0.75

Band Clamp 121mm-127mm

#15-0702

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders. Fits: 121-127mm. (4.76"-5.00") Diameters

USD$ 0.75
Yamaha RD350LC Band Clamp 37-43mm
USD$ 1.50

Band Clamp 37-43mm

#15-0703

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifold to Filter Joints and all purpose uses except carb holders. Fits: 37-43mm. (1.45"-1.69") Diameters

USD$ 1.50
Yamaha RD350LC Band Clamp 78-80mm
USD$ 3.35

Band Clamp 78-80mm

#15-2031

Universal Band Clamp for Carb Holders or Air Boxes Fits: Diameters 78-80mm.

USD$ 3.35
Yamaha RD350LC Professional Carb Rebuild Shop Kit - 4mm x 400 JIS Phillips Pan-Head Assortment
USD$ 109.95

Professional Carb Rebuild Shop Kit - 4mm x 400 JIS Phillips Pan-Head Assortment

#28-6926

401 Piece JIS Phillips Pan-Head Bolt Set with Plastic Case. All the screws you typically need when rebuild carbs that require 4mm machine screws. This includes the carbs found on many early Kawasaki KZ and Suzuki GS models. Includes Sizes 4X8, 4X10, 4X12, 4X14, 4X16, 4X18 and 4X20.

USD$ 109.95
Yamaha RD350LC Professional Carb Rebuild Shop Kit - 5mm x 600 JIS Phillips Pan-Head Assortment
USD$ 182.95

Professional Carb Rebuild Shop Kit - 5mm x 600 JIS Phillips Pan-Head Assortment

#28-6927

601 Piece JIS Phillips Pan-Head Bolt Set with Plastic Case. All the screws you typically need when rebuild carbs that require 5mm machine screws. This includes the carbs found on many Kawasaki KZ, Suzuki GS, Yamaha XS models with CV carbs. Includes Sizes 5X8, 5X10, 5X12, 5X14, 5X16, 5X18

USD$ 182.95
Yamaha RD350LC Carb Rebuild Shop Kit - 4mm x 800 Bolt/Washer Assortment
USD$ 79.95

Carb Rebuild Shop Kit - 4mm x 800 Bolt/Washer Assortment

#28-6936

802 Piece Stainless Steel Socket Head Bolt Set with Plastic Case. All the screws you typically need when rebuilding carbs that require 4mm machine screws. This includes the carbs found on many early Kawasaki KZ and Suzuki GS models. Includes Sizes 4x8, 4x10, 4x12, 4x14, 4x16, 4x18, 4x20

USD$ 79.95
Yamaha RD350LC Carb Rebuild Shop Kit - 5mm x 1,200 Bolt/Washer Assortment
USD$ 134.95

Carb Rebuild Shop Kit - 5mm x 1,200 Bolt/Washer Assortment

#28-6937

1202 Piece Stainless Steel Socket Head Bolt Set with Plastic Case. All the screws you typically need when rebuilding carbs that require 5mm machine screws. This includes the carbs found on many Kawasaki KZ, Suzuki GS, Yamaha XS models with CV carbs. Includes Sizes 5X8, 5X10, 5X12, 5X14, 5X16, 5X18

USD$ 134.95
Yamaha RD350LC Carb Float Level Gauge
USD$ 14.75

Carb Float Level Gauge

#35-0043

Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors. Adjustable Width: 16-78mm and Adjustable Height 0-40mm

USD$ 14.75
Yamaha RD350LC Hose Remover Pliers
USD$ 9.60

Hose Remover Pliers

#35-0049

Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.

USD$ 9.60
Yamaha RD350LC 382pc O-Rings Kit with Plastic Case
USD$ 18.45

382pc O-Rings Kit with Plastic Case

#35-0066

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm 20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm 20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm 20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm 20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm 20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm 20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm 10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm 10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm 10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm 10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm 10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm 10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm 10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm 10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm

USD$ 18.45
Yamaha RD350LC 419pc O-Rings Kit with Plastic Case
USD$ 20.70

419pc O-Rings Kit with Plastic Case

#35-0067

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm 23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm 23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm 23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm 20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm 18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm 14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm 13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm 10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm 10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm 10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm 10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm 10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm 10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm 10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm 10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm

USD$ 20.70
Yamaha RD350LC Carburetor Adjusting Tool
USD$ 14.00

Carburetor Adjusting Tool

#35-0084

Carburetor Adjusting Tool. Works with Mikuni or Keihin carbs. 11" long tool with a 8mm hex nut and screwdriver slot adjusting bolt. This combo design allows unlocking of the locknut, adjustments to the balancing screw and re-locking the lock nut in one step.

USD$ 14.00
Yamaha RD350LC Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders
USD$ 62.85

Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders

#35-0085

Carburetor and throttle body synchronizer kit for bikes with 2, 3 or 4 Cylinders. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2, 3 or 4 cylinders. Includes 4 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 62.85
Yamaha RD350LC Carb Cleaning Tool Set
USD$ 8.10

Carb Cleaning Tool Set

#35-9110

Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.

USD$ 8.10
Yamaha RD350LC Fluid Hose Clamp
USD$ 5.55

Fluid Hose Clamp

#35-9117

Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.

USD$ 5.55
Yamaha RD350LC Portable Auxiliary Fuel Tank Tool
USD$ 36.95

Portable Auxiliary Fuel Tank Tool

#35-9120

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed. Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

USD$ 36.95
Yamaha RD350LC Carb Cleaning Tool Set
USD$ 8.85

Carb Cleaning Tool Set

#35-9125

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.

USD$ 8.85
Yamaha RD350LC Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer
USD$ 36.95

Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

#37-0003

Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2 carbs. Includes 2 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.

USD$ 36.95
The names Honda, Yamaha, Kawasaki, Suzuki and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.