Yamaha ► XJ900RK ►
-
Here’s our hand-picked list of parts and accessories for your Yamaha XJ900RK with universal parts included that match “1”►
- Yamaha
JIS Screw Bit Set
JIS Type 6 Pc. Screw Bit Set with Caribiner Holder. Includes 25mm Bits - PH1, PH2, PH3 and 25mm Torsion Bits (designed to stand up to the rigors of heavy duty impact driving) PH1, PH2, PH3. Most screws used on Japanese motorcycles are NOT phillips but JIS type (Japanese Industry Standard). JIS screws look like a phillips end but have a tiny dot stamped onto the face. It is important to use these correct JIS type bits when working on your motorcycle as phillips bits ARE different and using them are more likely to result in stripping/slipping screws. Get this correct set of JIS bits for your motorcycle today!
Micro Custom Speedometer-KPH ~ Black Face Plate
Micro (1.9") Chromed Custom Type Kilometers Per Hour (KM/H) Speedometer with Black face plate. Includes LED illumination and mounting plate, requires mounting brackets (03-0740, 03-0741, 03-0762 or 03-0763) to mount to handlebars. Face dial ranges from 0-220KM/H. The ratio of this Speedometer is 60MPH=2240 RPM. Note: These are not stock type replacement speedometers, Please ensure this is the correct ratio for your bike.
Headlight Shell & Rim
Custom Ready to Assemble Chrome Side Mount Headlight Bucket Rim & Retainer. Designed for 7" sealed or non sealed H4 type headlights. Chrome all metal bucket with chrome trim ring. Side mounting holes are threaded (13.5mm). Outer side mounting points are 7-1/2" apart. Comes with a wired plug that works with sealed beam or H4 bulbs. H4 Beam Headlight sold separately #09-0072
HandleBar
HandleBar European Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
HandleBar
HandleBar Suzuki GS Type Chrome Bar Diameter - 7/8" - 22mm, Length - 30" - 762mm, Pull Back - 6" - 152mm, Inner Rise - 6 3/4" - 171mm, End Rise - 9" - 228mm, Center Width - 5 1/2" - 140mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar - Black
European Type Bar - Black. Bar Diameter - 7/8" - 22mm, Length - 30 1/4 - 768mm, Pull Back - 5" - 127mm, Inner Rise - 3 3/8" - 86mm, End Rise - 3" - 76mm, Center Width - 5" - 127mm, Base Width - 7 3/4" - 197mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
Handlebar
Dirtbike Custom Type Bar - Chrome. Bar Diameter - 7/8" - 22mm, Length - 31 3/4" - 806mm, Pull Back - 4" - 102mm, Inner Rise - 4 1/4" - 108mm, End Rise - 6 3/4" - 171mm, Center Width - 5" - 127mm, Base Width - 8" - 203mm, Control Length - 9" - 228mm, Drilled - NO Note: Not Drilled for wires
419pc O-Rings Kit with Plastic Case
419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes. QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia. 20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm 23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm 23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm 23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm 20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm 18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm 14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm 13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm 10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm 10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm 10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm 10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm 10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm 10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm 10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm 10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm
TC Bros. Universal Linkage Kit
TC Bros. Brand Universal Linkage Kit for all TC Bros. Forward Control Kits. The rods/tubes will need to be cut to fit your application. Kit includes, Two 24" Long 5/16" Threaded Rods, Four 5/16" Ball Joints, Two 5/16" ID x 1/2" OD Steel Tubes* (to cover rod threads and increase rigidity), Eight 5/16" Jam Nuts, Four Nylock Nuts and Four Flat Washers. This Set is needed for all the forward control kits we carry
Feeler Gauge Set
Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only). 0.05mm. - (.002") 0.55mm. - (0.22") 0.10mm. - (.004") 0.60mm. - (0.24") 0.15mm. - (.006") 0.65mm. - (0.26") 0.20mm. - (.008") 0.70mm. - (0.28") 0.25mm. - (.010") 0.75mm. - (0.30") 0.30mm. - (.012") 0.80mm. - (0.32") 0.35mm. - (.014") 0.85mm. - (0.34") 0.40mm. - (.016") 0.90mm. - (0.36") 0.45mm. - (.018") 0.95mm. - (0.38") 0.50mm. - (0.20") 1.00mm. - (0.40")