How do I choose between XS750D, XS750E and XS750S parts?

Use the complete model and year in the Yamaha documentation, then match the engine and fitted components. The D/2D is the early standard group, the 1978 E has revised carburetion and ignition, and S identifies Special applications in this catalog. The model guides explain the service differences.

Do early XS750D and later E/S carburetors use the same rebuild parts?

The featured E/S carburetor kits do not list XS750D. The early D bowl gasket and float needle-and-seat assembly have a specific 1977 application. Compare the carburetor body markings and bowl pattern, especially if a previous owner replaced the bank.

Does the Yamaha XS750 have chain drive or shaft drive?

The XS750 uses shaft final drive to the rear wheel. It also has an internal primary chain in the engine’s drive system, separate from the cam chain. Identify the assembly being repaired before buying a chain.

Can I use XS750E parts on an XS750S Special?

Some individual products list both models, including the featured carburetor rebuild kits and engine gasket set. That overlap does not establish fork, brake, intake-holder or cable interchange. Use the application on each part rather than a general E-to-S substitution.

Yamaha XS750 Parts | Carb Kits, Gaskets & Brakes | PartsNMore

About the Yamaha XS750

Parts for Yamaha’s 747cc triple, from early standard models to the XS750 Special.

The XS750’s three-cylinder DOHC engine and shaft final drive give it a different service layout from Yamaha’s XS twins and four-cylinder models. The XS750-2D manual describes three carburetors, a five-speed gearbox and a wet multi-plate clutch. Those distinctions matter when planning a carb rebuild, clutch repair or engine reseal.

Early D, revised E or Special: choose the right branch

The 1978 XS750E introduced carburetor and ignition revisions to the standard triple. The Special added its own chassis details; the 1979 XS750SF had higher handlebars, a stepped seat and leading-axle forks. Selected engine parts overlap, but fork seals, carburetor gaskets and control cables need their own applications.

Choose the right applicationYamaha XS750 model differences

These groups help you choose a collection. Model names and specifications can vary by original market.

Early standard

XS750D / XS750-2D

For a D-labelled repair, begin with the early-model carburetor gaskets, float-valve parts and clutch cable. The featured bowl gasket and float needle-and-seat assembly explicitly cover XS750D 1977.

Compare XS750D parts

Revised standard

XS750E

The E range includes carb kits, engine gaskets, oil-filter O-rings and wheel seals. Compare the two rebuild-kit applications for a 1978 E before deciding which package you need.

Compare XS750E parts

Special

XS750S Special

The Special range adds specific intake holders, bowl gaskets and fork oil seals. Its handlebars and fork arrangement make standard-model chassis substitutions a separate decision.

Compare XS750S parts

Other catalog entries

Plain XS750 and XS750F

The family collection also includes products tagged XS750 or XS750F. The linked wheel seal kit lists XS750F 1979; that single application does not establish fitment for every F-labelled part.

Check the motorcycle and its componentsYamaha XS750 frame, engine & model checklist

Use these checks with the Yamaha documentation for your original market. Frame and engine markings identify the assemblies; they do not prove that every fitted component is original.

Complete model and market. Record the full designation in the original Yamaha documentation and the frame marking. Registration year alone may not identify the model year, particularly on an imported bike.
Engine and carburetor identity. Photograph the engine number and carburetor body markings. Distinguish an original D/2D assembly from later E or Special components before selecting rebuild parts.
Front end and controls. Compare the installed fork, master cylinder and cable routing. A Special-style tank or handlebar conversion does not change which brake seals or cable ends the fitted assemblies require.

Still unsure which XS750 part you need?

Ask the PartsNMore team with your model, year, original market if known, and clear photos of the identification markings and component.

Yamaha XS750 parts for repairs & restoration

Start with the repair, then confirm the exact product application and supplied quantity.

Carburetor rebuilds and float-bowl repairs

XS750E/S carburetor rebuild kit lists 1978–79 applications; the alternative E/S carb kit lists 1978. For an early D, use the 1977 XS750D bowl gasket application. Identify the carburetor bank and confirm the package coverage before ordering.

XS750 carburetor parts

Engine gaskets and oil-filter seals

Use the XS750 engine gasket set for the engine joints covered by its contents. For oil-filter housing service, the separate oil-filter O-ring set addresses that sealing job. An O-ring set is not an oil filter.

XS750 engine parts

Front master cylinders and brake calipers

The front master-cylinder repair kit has D and S applications. The D caliper kit and Special caliper kit have different application lists. Identify the assembly and brake position before comparing seals.

XS750 brake parts

Clutch plates and control cables

The XS750 clutch plate is sold individually; order the quantity required. For D-model cable work, use the XS750D clutch cable application and compare its end fittings and routing. Shared engine capacity does not establish cable fit.

XS750 clutch parts

Special fork oil seals

The XS750S fork oil seal set contains two seals with listed dimensions 36 × 48 × 11. Match the installed fork and inspect the tubes and dust seals as separate items.

XS750 suspension parts

Wheel seals by model and year

The XS750 wheel seal kit lists D 1977, E 1978, S 1978–79 and F 1979. Confirm the wheel position, hub and spacer dimensions. Do not assume a seal kit includes wheel bearings.

XS750 wheel parts

Restoring or customizing your XS750?

Changing the riding position on your triple? Measure the handlebar diameter, mirror threads, cable reach and hose clearance before choosing universal controls. Special and standard routing may differ.

Universal accessories are not a confirmed model-specific fit; check dimensions and any modifications needed.

Why buy your XS750 parts from PartsNMore?

Supplying motorcycle parts since 2002. Meet PartsNMore.

Read customer reviews →

Stock on our shelves

Items marked in stock are held in our warehouse. Check the current product page when ordering.

Free ground shipping

USA: $50 USD or more. Canada: over $50 CAD. View shipping details.

60-day returns

Eligible unused, unaltered parts in original packaging. No restocking fee; electrical parts excluded. Read the return policy.

Need help choosing? Ask our parts team with your full model, year and component photos.

Browse parts

Choose your Yamaha XS750 model

Yamaha XS750 Wheel Seal Kit

1977 Yamaha XS750D Wheel Seal Kit

About the Yamaha XS750

Early D, revised E or Special: choose the right branch

Choose the right applicationYamaha XS750 model differences

XS750D / XS750-2D

XS750E

XS750S Special

Plain XS750 and XS750F

Check the motorcycle and its componentsYamaha XS750 frame, engine & model checklist

Yamaha XS750 parts for repairs & restoration

Carburetor rebuilds and float-bowl repairs

Engine gaskets and oil-filter seals

Front master cylinders and brake calipers

Clutch plates and control cables

Special fork oil seals

Wheel seals by model and year

Restoring or customizing your XS750?

Why buy your XS750 parts from PartsNMore?

Stock on our shelves

Free ground shipping

60-day returns

Yamaha XS750 parts questions

Email

Motorcycle Parts

ATV Parts

Your cart